AlkantarClanX12
Your IP : 216.73.216.176
| Current Path : /var/backups/ |
|
|
| Current File : /var/backups/dpkg.status.0 |
Package: libquadmath0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 265
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.23)
Description: GCC Quad-Precision Math Library
A library, which provides quad-precision mathematical functions on targets
supporting the __float128 datatype. The library is used to provide on such
targets the REAL(16) type in the GNU Fortran compiler.
Homepage: http://gcc.gnu.org/
Package: python-apt-common
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 626
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: all
Source: python-apt
Version: 1.4.3
Replaces: python-apt (<< 0.7.98+nmu1)
Breaks: python-apt (<< 0.7.98+nmu1)
Enhances: python-apt, python3-apt
Description: Python interface to libapt-pkg (locales)
The apt_pkg Python interface will provide full access to the internal
libapt-pkg structures allowing Python programs to easily perform a
variety of functions.
.
This package contains locales.
Package: python-dnspython
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 598
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: dnspython
Version: 1.15.0-1+deb9u1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: DNS toolkit for Python
dnspython is a DNS toolkit for Python. It supports almost all record types. It
can be used for queries, zone transfers, and dynamic updates. It supports TSIG
authenticated messages and EDNS0.
.
dnspython provides both high and low level access to DNS. The high level
classes perform queries for data of a given name, type, and class, and return
an answer set. The low level classes allow direct manipulation of DNS zones,
messages, names, and records.
Homepage: http://www.dnspython.org
Package: libnpth0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 43
Maintainer: Eric Dorland <eric@debian.org>
Architecture: amd64
Multi-Arch: same
Source: npth
Version: 1.3-1
Depends: libc6 (>= 2.17)
Description: replacement for GNU Pth using system threads
nPth is a non-preemptive threads implementation using an API very
similar to the one known from GNU Pth. It has been designed as a
replacement of GNU Pth for non-ancient operating systems. In
contrast to GNU Pth it is based on the system's standard threads
implementation. Thus nPth allows the use of libraries which are not
compatible to GNU Pth.
Homepage: https://www.gnupg.org/
Package: php7.0-mysql
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 478
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-mysqli, php-mysqlnd, php-pdo-mysql, php7.0-mysqli, php7.0-mysqlnd, php7.0-pdo-mysql
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc6 (>= 2.15)
Description: MySQL module for PHP
This package provides the MySQL module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: bind9utils
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1328
Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Architecture: amd64
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u12
Replaces: bind9 (<= 1:9.9.5.dfsg-1)
Depends: libbind9-140, libc6 (>= 2.14), libcap2 (>= 1:2.10), libcomerr2 (>= 1.01), libdns162, libgeoip1, libgssapi-krb5-2 (>= 1.6.dfsg.2), libisc160, libisccc140, libisccfg140, libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libssl1.0.2 (>= 1.0.2d), libxml2 (>= 2.6.27), python3
Description: Utilities for BIND
This package provides various utilities that are useful for maintaining a
working BIND installation.
Package: bind9-host
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 313
Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Architecture: amd64
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u12
Replaces: dnsutils (<< 1:9.0.0), host (<< 1:9.7.0)
Provides: host
Depends: libbind9-140 (= 1:9.10.3.dfsg.P4-12.3+deb9u12), libc6 (>= 2.4), libcap2 (>= 1:2.10), libcomerr2 (>= 1.01), libdns162 (= 1:9.10.3.dfsg.P4-12.3+deb9u12), libgeoip1, libgssapi-krb5-2 (>= 1.6.dfsg.2), libisc160 (= 1:9.10.3.dfsg.P4-12.3+deb9u12), libisccfg140 (= 1:9.10.3.dfsg.P4-12.3+deb9u12), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), liblwres141 (= 1:9.10.3.dfsg.P4-12.3+deb9u12), libssl1.0.2 (>= 1.0.2d), libxml2 (>= 2.6.27)
Conflicts: dnsutils (<< 1:9.0.0), host (<< 1:9.7.0)
Description: Version of 'host' bundled with BIND 9.X
This package provides the 'host' program in the form that is bundled with
the BIND 9.X sources.
Package: libhtml-tagset-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 32
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 3.20-3
Depends: perl
Description: Data tables pertaining to HTML
HTML-Tagset contains data tables useful in dealing with HTML. For instance,
it provides %HTML::Tagset::emptyElement, which lists all of the HTML elements
which cannot have content. It provides no functions or methods.
Homepage: https://metacpan.org/release/HTML-Tagset
Package: iputils-ping
Status: install ok installed
Priority: important
Section: net
Installed-Size: 111
Maintainer: Noah Meyerhans <noahm@debian.org>
Architecture: amd64
Source: iputils
Version: 3:20161105-1
Provides: ping
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10), libidn11 (>= 1.13), libnettle6
Recommends: libcap2-bin
Description: Tools to test the reachability of network hosts
The ping command sends ICMP ECHO_REQUEST packets to a host in order to
test if the host is reachable via the network.
.
This package includes a ping6 utility which supports IPv6 network
connections.
Package: python-idna
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 271
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Version: 2.2-1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: Python IDNA2008 (RFC 5891) handling (Python 2)
A library to support the Internationalised Domain Names in Applications (IDNA)
protocol as specified in RFC 5891. This version of the protocol is often
referred to as “IDNA2008” and can produce different results from the earlier
standard from 2003.
.
The library is also intended to act as a suitable drop-in replacement for the
“encodings.idna” module that comes with the Python standard library but
currently only supports the older 2003 specification.
.
This package contains the module for Python 2.
Homepage: https://github.com/kjd/idna
Package: libedit2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 241
Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libedit
Version: 3.1-20160903-3
Depends: libbsd0 (>= 0.0), libc6 (>= 2.17), libncurses5 (>= 6), libtinfo5 (>= 6)
Description: BSD editline and history libraries
Command line editor library provides generic line editing,
history, and tokenization functions.
.
It slightly resembles GNU readline.
Homepage: http://www.thrysoee.dk/editline/
Package: python3-cryptography
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1456
Maintainer: Tristan Seligmann <mithrandi@debian.org>
Architecture: amd64
Source: python-cryptography
Version: 1.7.1-3+deb9u2
Depends: python3 (>= 3~), python3-cffi-backend-api-min (<= 9729), python3-cffi-backend-api-max (>= 9729), python3-idna (>= 2.0), python3-pyasn1 (>= 0.1.8), python3-setuptools (>= 11.3), python3-six (>= 1.4.1), python3:any (>= 3.4~), libc6 (>= 2.4), libssl1.1 (>= 1.1.0)
Suggests: python-cryptography-doc, python3-cryptography-vectors
Breaks: python3-openssl (<< 16.0.0)
Description: Python library exposing cryptographic recipes and primitives (Python 3)
The cryptography library is designed to be a "one-stop-shop" for
all your cryptographic needs in Python.
.
As an alternative to the libraries that came before it, cryptography
tries to address some of the issues with those libraries:
- Lack of PyPy and Python 3 support.
- Lack of maintenance.
- Use of poor implementations of algorithms (i.e. ones with known
side-channel attacks).
- Lack of high level, "Cryptography for humans", APIs.
- Absence of algorithms such as AES-GCM.
- Poor introspectability, and thus poor testability.
- Extremely error prone APIs, and bad defaults.
.
This package contains the Python 3 version of cryptography.
Homepage: https://cryptography.io/
Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1016
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.6
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
/etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
/etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
Contains configuration files and directories required for
authentication to work on Debian systems. This package is required
on almost all installations.
Homepage: http://www.linux-pam.org/
Package: vim-tiny
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 1067
Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: vim
Version: 2:8.0.0197-4+deb9u7
Provides: editor
Depends: vim-common (= 2:8.0.0197-4+deb9u7), libacl1 (>= 2.2.51-8), libc6 (>= 2.15), libselinux1 (>= 1.32), libtinfo5 (>= 6)
Suggests: indent
Conffiles:
/etc/vim/vimrc.tiny 103fa7ce385b40469f20b73473aa866c
Description: Vi IMproved - enhanced vi editor - compact version
Vim is an almost compatible version of the UNIX editor Vi.
.
This package contains a minimal version of Vim compiled with no GUI and
a small subset of features. This package's sole purpose is to provide
the vi binary for base installations.
.
If a vim binary is wanted, try one of the following more featureful
packages: vim, vim-nox, vim-athena, vim-gtk, or vim-gtk3.
Homepage: http://www.vim.org/
Package: dovecot-core
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 9182
Maintainer: Dovecot Maintainers <jaldhar-dovecot@debian.org>
Architecture: amd64
Source: dovecot
Version: 1:2.2.27-3+deb9u7
Replaces: dovecot-common (<< 1:2.0.14-2~), mailavenger (<< 0.8.1-4)
Provides: dovecot-abi-2.2.abiv27, dovecot-common
Depends: libbz2-1.0, libc6 (>= 2.17), libexttextcat-2.0-0 (>= 3.3.0), liblz4-1 (>= 0.0~r113), liblzma5 (>= 5.1.1alpha+20120614), libpam0g (>= 0.99.7.1), libssl1.1 (>= 1.1.0), libstemmer0d (>= 0+svn527), libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4), init-system-helpers (>= 1.18~), libpam-runtime (>= 0.76-13.1), openssl, adduser, ucf (>= 2.0020), lsb-base
Suggests: ntp, dovecot-gssapi, dovecot-sieve, dovecot-pgsql, dovecot-mysql, dovecot-sqlite, dovecot-ldap, dovecot-imapd, dovecot-pop3d, dovecot-lmtpd, dovecot-managesieved, dovecot-solr, dovecot-lucene
Breaks: dovecot-common (<< 1:2.0.14-2~), mailavenger (<< 0.8.1-4)
Conffiles:
/etc/default/dovecot bb2b846b1f7d186ec384f825796994c4
/etc/init.d/dovecot 9a8651cfacbab03b6ef22bb6a6dca8fc
/etc/pam.d/dovecot 788128882dc95f31f2f979d700603f19
Description: secure POP3/IMAP server - core files
Dovecot is a mail server whose major goals are security and extreme
reliability. It tries very hard to handle all error conditions and verify
that all data is valid, making it nearly impossible to crash. It supports
mbox/Maildir and its own dbox/mdbox formats, and should also be pretty
fast, extensible, and portable.
.
This package contains the Dovecot main server and its command line utility.
Homepage: http://dovecot.org/
Package: libncurses5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 287
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Depends: libtinfo5 (= 6.0+20161126-1+deb9u2), libc6 (>= 2.14)
Recommends: libgpm2
Description: shared libraries for terminal handling
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains the shared libraries necessary to run programs
compiled with ncurses.
Homepage: http://invisible-island.net/ncurses/
Package: libtool
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1228
Maintainer: Kurt Roeckx <kurt@roeckx.be>
Architecture: all
Multi-Arch: foreign
Version: 2.4.6-2
Depends: gcc | c-compiler, cpp, libc6-dev | libc-dev, file, autotools-dev
Recommends: libltdl-dev
Suggests: libtool-doc, autoconf (>> 2.50), automaken, gfortran | fortran95-compiler, gcj-jdk
Conflicts: autoconf (<= 2.12), automake (<= 1.3), libtool1.4
Description: Generic library support script
This is GNU libtool, a generic library support script. Libtool hides
the complexity of generating special library types (such as shared
libraries) behind a consistent interface. To use libtool, add the
new generic library building commands to your Makefile, Makefile.in,
or Makefile.am. See the documentation for details. Libtool supports
building static libraries on all platforms.
.
Libtool supports generation of C, C++, Fortran and Java libraries.
Homepage: http://www.gnu.org/software/libtool/
Package: manpages-pl
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 2709
Maintainer: Robert Luberda <robert@debian.org>
Architecture: all
Version: 1:0.7-1
Replaces: manpages-pl-dev (<= 1:0.1.1), realpath (<= 1.20)
Suggests: man-db | man-browser, manpages-pl-dev
Breaks: manpages-pl-dev (<= 1:0.1.1), realpath (<= 1.20)
Description: Polish man pages
This package contains the GNU/Linux manual pages translated into Polish.
Following sections are provided:
.
* 1 = User programs (e.g. ls, ln).
* 4 = Devices (e.g. hd, sd).
* 5 = File formats and protocols, syntaxes of several system
files (e.g. wtmp, /etc/passwd, nfs).
* 6 = Games etc.
* 7 = Conventions and standards, macro packages, etc.
(e.g. nroff, ascii).
* 8 = Administration and privileged commands.
Homepage: https://sourceforge.net/projects/manpages-pl/
Package: libgomp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 203
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.17)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC OpenMP (GOMP) support library
GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers
in the GNU Compiler Collection.
Homepage: http://gcc.gnu.org/
Package: python3.5
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 321
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Version: 3.5.3-1+deb9u5
Depends: python3.5-minimal (= 3.5.3-1+deb9u5), libpython3.5-stdlib (= 3.5.3-1+deb9u5), mime-support
Suggests: python3.5-venv, python3.5-doc, binutils
Description: Interactive high-level object-oriented language (version 3.5)
Python is a high-level, interactive, object-oriented language. Its 3.5 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
Package: libjs-jquery
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 551
Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: jquery
Version: 3.1.1-2+deb9u2
Replaces: jquery
Recommends: javascript-common
Breaks: movabletype-opensource (<< 5.1.4+dfsg-3~)
Conflicts: jquery
Description: JavaScript library for dynamic web applications
jQuery is a fast, concise, JavaScript Library that simplifies how you
traverse HTML documents, handle events, perform animations, and add Ajax
interactions to your web pages. jQuery is designed to change the way
that you write JavaScript.
Homepage: http://jquery.com/
Package: mariadb-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 72
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: mariadb-10.1
Version: 10.1.48-0+deb9u2
Depends: mysql-common (>= 5.6.25)
Conffiles:
/etc/mysql/mariadb.cnf 46a0151b3b022b225cabb97e6d1ad947
Description: MariaDB common metapackage
MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
server. SQL (Structured Query Language) is the most popular database query
language in the world. The main goals of MariaDB are speed, robustness and
ease of use.
Homepage: https://mariadb.org/
Package: libatomic1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 41
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.14)
Description: support library providing __atomic built-in functions
library providing __atomic built-in functions. When an atomic call cannot
be turned into lock-free instructions, GCC will make calls into this library.
Homepage: http://gcc.gnu.org/
Package: libapr1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 259
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apr
Version: 1.5.2-5+deb9u1
Depends: libc6 (>= 2.15), libuuid1 (>= 2.16)
Conflicts: libapr1.0
Description: Apache Portable Runtime Library
APR is Apache's Portable Runtime Library, designed to be a support library
that provides a predictable and consistent interface to underlying
platform-specific implementations.
Homepage: http://apr.apache.org/
Package: libpython3-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 36
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3-defaults
Version: 3.5.3-1
Depends: libpython3.5-stdlib (>= 3.5.3-1~)
Description: interactive high-level object-oriented language (default python3 version)
Python, the high-level, interactive object oriented language,
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package is a dependency package, which depends on Debian's default
Python 3 version (currently v3.5).
Homepage: http://www.python.org/
Package: update-inetd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 69
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 4.44
Replaces: netbase (<< 4.27)
Depends: debconf (>= 0.5) | debconf-2.0, libfile-temp-perl, libfile-copy-recursive-perl
Breaks: netbase (<< 4.27)
Description: inetd configuration file updater
This package provides a program used by other packages to
automatically update /etc/inetd.conf, the configuration file shared
by all implementations of the Internet super-server.
.
Note that xinetd is not supported by this package.
Package: dbconfig-mysql
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 9
Maintainer: Paul Gevers <elbrus@debian.org>
Architecture: all
Source: dbconfig-common
Version: 2.0.8
Depends: dbconfig-common (= 2.0.8), default-mysql-client | virtual-mysql-client
Suggests: default-mysql-server | virtual-mysql-server
Conflicts: dbconfig-no-thanks
Description: dbconfig-common MySQL/MariaDB support
This package ensures MySQL/MariaDB support in the dbconfig-common framework,
and should be in the depends list of packages that require MySQL support from
dbconfig-common.
.
System administrators that don't want dbconfig-common to handle the database
management should install dbconfig-no-thanks instead.
Package: cpp
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 41
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: gcc-defaults (1.168)
Version: 4:6.3.0-4
Depends: cpp-6 (>= 6.3.0-9~)
Suggests: cpp-doc
Conflicts: cpp-doc (<< 1:2.95.3)
Description: GNU C preprocessor (cpp)
The GNU C preprocessor is a macro processor that is used automatically
by the GNU C compiler to transform programs before actual compilation.
.
This package has been separated from gcc for the benefit of those who
require the preprocessor but not the compiler.
.
This is a dependency package providing the default GNU C preprocessor.
Package: imagemagick-6-common
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 540
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: imagemagick
Version: 8:6.9.7.4+dfsg-11+deb9u14
Replaces: imagemagick-common (<< 8:6.9.2.10+dfsg-1~), libmagickcore-6.q16 (<< 8:6.9.6.2+dfsg-3~)
Provides: imagemagick-common
Breaks: imagemagick-common (<< 8:6.9.2.10+dfsg-1~), libmagickcore-6.q16-2 (<< 8:6.9.6.2+dfsg-3~), libmagickcore-6.q16-3 (<< 8:6.9.6.8+dfsg-1~)
Conffiles:
/etc/ImageMagick-6/coder.xml 184715fdf06bd9fc835dc62929e8d36f
/etc/ImageMagick-6/colors.xml 27d44e4d5e96d3db5a8cf834b44b69a5
/etc/ImageMagick-6/delegates.xml 5a6c13b9a15988fa171e72039396fb6c
/etc/ImageMagick-6/log.xml 63b78f245752f5332d587e8f0917a085
/etc/ImageMagick-6/magic.xml 04b219d820811a6cb1bc7af03b52b626
/etc/ImageMagick-6/mime.xml 7691ca051247d9da165f154a1c41b411
/etc/ImageMagick-6/policy.xml c5ec6367e54debbf20f278a8ee79561f
/etc/ImageMagick-6/quantization-table.xml 0bc6653bd4f56e8a8f108c72c612c8b6
/etc/ImageMagick-6/thresholds.xml 04d4a80687f7073ae81c91907889db42
/etc/ImageMagick-6/type-apple.xml 94406299efa71b566167341c4bfa069a
/etc/ImageMagick-6/type-dejavu.xml 09bd5cf793568d2a5e185d475bc45b96
/etc/ImageMagick-6/type-ghostscript.xml d7fdef0a5e8ff7446600ede4e04f6acf
/etc/ImageMagick-6/type-windows.xml 21d3ea0e2b51ded4e3870d401897a9d8
/etc/ImageMagick-6/type.xml d0caa5ce47ac32e40980d1ee7bf882eb
Description: image manipulation programs -- infrastructure
imagemagick-common contains the filesystem infrastructure required for
further installation of imagemagick in any configuration; it does not provide
a full installation of binaries, libraries, and utilities
required to run imagemagick.
.
This package is independent of channel depth.
Homepage: http://www.imagemagick.org/
Package: libapt-pkg5.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3056
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 1.4.11
Provides: libapt-pkg (= 1.4.11)
Depends: libbz2-1.0, libc6 (>= 2.15), libgcc1 (>= 1:3.0), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 5.2), zlib1g (>= 1:1.2.2.3)
Recommends: apt (>= 1.4.11)
Breaks: appstream (<< 0.9.0-3~), apt (<< 1.1~exp14), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
This library provides the common functionality for searching and
managing packages as well as information about packages.
Higher-level package managers can depend upon this library.
.
This includes:
* retrieval of information about packages from multiple sources
* retrieval of packages and all dependent packages
needed to satisfy a request either through an internal
solver or by interfacing with an external one
* authenticating the sources and validating the retrieved data
* installation and removal of packages in the system
* providing different transports to retrieve data over cdrom, ftp,
http, rsh as well as an interface to add more transports like
https (apt-transport-https) and debtorrent (apt-transport-debtorrent).
Package: libaudit1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 150
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: audit
Version: 1:2.6.7-2
Depends: libaudit-common (>= 1:2.6.7-2), libc6 (>= 2.14), libcap-ng0
Description: Dynamic library for security auditing
The audit-libs package contains the dynamic libraries needed for
applications to use the audit framework. It is used to monitor systems for
security related events.
Homepage: https://people.redhat.com/sgrubb/audit/
Package: readline-common
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 89
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: readline
Version: 7.0-3
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
The GNU readline library aids in the consistency of user interface
across discrete programs that need to provide a command line
interface.
.
The GNU history library provides a consistent user interface for
recalling lines of previously typed input.
Package: python3-yaml
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 443
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: amd64
Source: pyyaml
Version: 3.12-1
Depends: python3 (<< 3.6), python3 (>= 3.5~), python3:any (>= 3.3.2-2~), libc6 (>= 2.14), libyaml-0-2
Description: YAML parser and emitter for Python3
Python3-yaml is a complete YAML 1.1 parser and emitter for Python3. It can
parse all examples from the specification. The parsing algorithm is simple
enough to be a reference for YAML parser implementors. A simple extension API
is also provided. The package is built using libyaml for improved speed.
Homepage: https://github.com/yaml/pyyaml
Package: libllvm3.8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 41050
Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: llvm-toolchain-3.8
Version: 1:3.8.1-24
Depends: libc6 (>= 2.15), libedit2 (>= 2.11-20080614), libffi6 (>= 3.0.4), libgcc1 (>= 1:3.4), libstdc++6 (>= 6), libtinfo5 (>= 6), zlib1g (>= 1:1.2.0)
Description: Modular compiler and toolchain technologies, runtime library
LLVM is a collection of libraries and tools that make it easy to build
compilers, optimizers, just-in-time code generators, and many other
compiler-related programs.
.
This package contains the LLVM runtime library.
Homepage: http://www.llvm.org/
Package: debhelper
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1448
Maintainer: Debhelper Maintainers <debhelper-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 10.2.5
Replaces: dh-systemd (<< 1.38)
Depends: autotools-dev, binutils, dh-autoreconf (>= 12~), dh-strip-nondeterminism (>= 0.028~), dpkg (>= 1.16.2), dpkg-dev (>= 1.18.2~), file (>= 3.23), libdpkg-perl (>= 1.17.14), man-db (>= 2.5.1-1), po-debconf, perl
Suggests: dh-make
Breaks: dh-systemd (<< 1.38)
Description: helper programs for debian/rules
A collection of programs that can be used in a debian/rules file to
automate common tasks related to building Debian packages. Programs
are included to install various files into your package, compress
files, fix file permissions, integrate your package with the Debian
menu system, debconf, doc-base, etc. Most Debian packages use debhelper
as part of their build process.
Package: cloud-guest-utils
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 58
Maintainer: Tiago Ilieve <tiago.myhro@gmail.com>
Architecture: all
Source: cloud-utils
Version: 0.29-1
Replaces: cloud-utils (<< 0.28~bzr281)
Depends: e2fsprogs (>= 1.4), util-linux (>= 2.17.2), python3:any
Recommends: gdisk | util-linux (>= 2.26.3)
Suggests: cloud-init
Breaks: cloud-utils (<< 0.28~bzr281)
Description: cloud guest utilities
This package contains programs useful inside cloud instance.
It contains 'growpart' for resizing a partition during boot, which is normally
done with the aid of cloud-init.
Homepage: https://launchpad.net/cloud-utils
Package: perl-modules-5.24
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 17631
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: all
Multi-Arch: foreign
Source: perl
Version: 5.24.1-3+deb9u7
Replaces: libansicolor-perl (<< 4.04), libarchive-tar-perl (<< 2.04.01), libattribute-handlers-perl (<< 0.99), libautodie-perl (<< 2.29-2), libcpan-meta-perl (<< 2.150005), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.17.01), libexperimental-perl (<< 0.016), libextutils-cbuilder-perl (<< 0.280225), libextutils-command-perl (<< 7.10.02), libextutils-install-perl (<< 2.04), libextutils-parsexs-perl (<< 3.310000), libfile-spec-perl (<< 3.6301), libhttp-tiny-perl (<< 0.056.001), libi18n-langtags-perl (<< 0.40), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.27300.01), liblocale-codes-perl (<< 3.37), liblocale-maketext-perl (<< 1.26.01), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999715), libmath-complex-perl (<< 1.59), libmodule-corelist-perl (<< 5.20170114.24), libmodule-load-conditional-perl (<< 0.64), libmodule-load-perl (<< 0.32), libmodule-metadata-perl (<< 1.000031), libnet-perl, libnet-ping-perl (<< 2.43.01), libpackage-constants-perl, libparams-check-perl (<< 0.38), libparent-perl (<< 0.234), libparse-cpan-meta-perl (<< 1.4417.001), libperl-ostype-perl (<< 1.009), libpod-escapes-perl (<< 1.07), libpod-parser-perl (<< 1.63), libpod-simple-perl (<< 3.32), libtest-harness-perl (<< 3.36.01), libtest-simple-perl (<< 1.001014), libtest-tester-perl (<< 0.114), libtest-use-ok-perl (<< 0.16), libthread-queue-perl (<< 3.09), libtime-local-perl (<< 1.2300), libunicode-collate-perl (<< 1.14), libversion-perl (<< 1:0.9916), libversion-requirements-perl, perl-base (<< 5.22.0~), perl-modules, podlators-perl
Provides: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcpan-meta-perl, libcpan-meta-requirements-perl, libcpan-meta-yaml-perl, libdigest-perl, libexperimental-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-spec-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libnet-perl, libnet-ping-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libtest-harness-perl, libtest-simple-perl, libtest-tester-perl, libtest-use-ok-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, perl-modules, podlators-perl
Depends: perl-base (>= 5.24.1-1)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: perl (>= 5.24.1-1)
Breaks: cli-common (<< 0.9+nmu1), libansicolor-perl (<< 4.04), libarchive-tar-perl (<< 2.04.01), libattribute-handlers-perl (<< 0.99), libautodie-perl (<< 2.29-2), libcpan-meta-perl (<< 2.150005), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.17.01), libexperimental-perl (<< 0.016), libextutils-cbuilder-perl (<< 0.280225), libextutils-command-perl (<< 7.10.02), libextutils-install-perl (<< 2.04), libextutils-parsexs-perl (<< 3.310000), libfile-spec-perl (<< 3.6301), libhttp-tiny-perl (<< 0.056.001), libi18n-langtags-perl (<< 0.40), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.27300.01), liblocale-codes-perl (<< 3.37), liblocale-maketext-perl (<< 1.26.01), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999715), libmath-complex-perl (<< 1.59), libmodule-corelist-perl (<< 5.20170114.24), libmodule-load-conditional-perl (<< 0.64), libmodule-load-perl (<< 0.32), libmodule-metadata-perl (<< 1.000031), libnet-perl (<= 1:1.22), libnet-ping-perl (<< 2.43.01), libparams-check-perl (<< 0.38), libparent-perl (<< 0.234), libparse-cpan-meta-perl (<< 1.4417.001), libperl-ostype-perl (<< 1.009), libpod-escapes-perl (<< 1.07), libpod-parser-perl (<< 1.63), libpod-simple-perl (<< 3.32), libtest-harness-perl (<< 3.36.01), libtest-simple-perl (<< 1.001014), libtest-tester-perl (<< 0.114), libtest-use-ok-perl (<< 0.16), libthread-queue-perl (<< 3.09), libtime-local-perl (<< 1.2300), libunicode-collate-perl (<< 1.14), libversion-perl (<< 1:0.9916), libversion-requirements-perl (<< 0.101022), maildirsync (<< 1.2-2.1), mono-apache-server2 (<< 3.8-2.1), mono-apache-server4 (<< 3.8-2.1), mono-fastcgi-server2 (<< 3.8-2.1), mono-fastcgi-server4 (<< 3.8-2.1), patcher (<< 0.0.20040521-6.1), pdl (<< 1:2.007-4), perl (<< 5.24.1~), podlators-perl (<< 2.3.1), polygen-data (<< 1.0.6.ds2-13.1), pristine-tar (<< 1.33), pure-ftpd-common (<< 1.0.36-3.2), rinse (<< 3.0.7), shorewall (<< 4.6.4.3-2), shorewall-core (<< 4.6.4.3-2), tvtime (<< 1.0.2-14)
Conflicts: defoma (<< 0.11.12), mono-gac (<< 2.10.8.1-3), perl-modules (<< 5.22.0~)
Description: Core Perl modules
Architecture independent Perl modules. These modules are part of Perl and
required if the `perl' package is installed.
.
Note that this package only exists to save archive space and should be
considered an internal implementation detail of the `perl' package.
Other packages should not depend on `perl-modules-5.24' directly, they
should use `perl' (which depends on `perl-modules-5.24') instead.
Homepage: http://dev.perl.org/perl5/
Package: fail2ban
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1290
Maintainer: Yaroslav Halchenko <debian@onerussian.com>
Architecture: all
Version: 0.9.6-2
Depends: python3:any (>= 3.3.2-2~), init-system-helpers (>= 1.18~), lsb-base (>= 2.0-7)
Recommends: python, iptables, whois, python3-pyinotify, python3-systemd
Suggests: mailx, system-log-daemon, monit
Conffiles:
/etc/bash_completion.d/fail2ban 98f61098655cbb5785c37511907ab9a6
/etc/default/fail2ban 66c59a6c990607ec771dbecfa8d9bc8f
/etc/fail2ban/action.d/apf.conf ff489332ad817434ff9f924deed6b1fc
/etc/fail2ban/action.d/badips.conf b0f003343ae124f495d2b34f97b877bf
/etc/fail2ban/action.d/badips.py dd1c2eb21d0882801e6c3ec79fbab535
/etc/fail2ban/action.d/blocklist_de.conf 02cdd19939fb7a6a8e99c9fd424b2975
/etc/fail2ban/action.d/bsd-ipfw.conf 070c8781335f96844e9893f3ff174df5
/etc/fail2ban/action.d/cloudflare.conf 4bc713b94c22cc8f233ade70697c40d0
/etc/fail2ban/action.d/complain.conf ad5ceacdd807e7ccaeec4004c048413a
/etc/fail2ban/action.d/dshield.conf b7ace75da34e198cd56464a762844626
/etc/fail2ban/action.d/dummy.conf 462d32179e222bc69ba6efa198a23156
/etc/fail2ban/action.d/firewallcmd-allports.conf c6f92c54894e5329915e85fc7377ac8d
/etc/fail2ban/action.d/firewallcmd-ipset.conf 5a16f8b5097292cd9d3e25603cab2253
/etc/fail2ban/action.d/firewallcmd-multiport.conf fe33aa57d256c40613895cead4c392e7
/etc/fail2ban/action.d/firewallcmd-new.conf 6ff7f5eeea2fc5a1ebf0267f3d87e88c
/etc/fail2ban/action.d/firewallcmd-rich-logging.conf b8e54085912e57dee97201d4ff51795f
/etc/fail2ban/action.d/firewallcmd-rich-rules.conf 4af669e861f190fce38225e0b4efd468
/etc/fail2ban/action.d/hostsdeny.conf 916d305a1897b73cfd064e916e14f150
/etc/fail2ban/action.d/ipfilter.conf bf317c030f09ca65ab6aeaf06b27b06b
/etc/fail2ban/action.d/ipfw.conf 0b0ce2e87c695260b587361a8e9ae4df
/etc/fail2ban/action.d/iptables-allports.conf 332876a03b669fd66a8cd9cc8888028a
/etc/fail2ban/action.d/iptables-common.conf c35471bc5bfccb2694fc9f4746304aba
/etc/fail2ban/action.d/iptables-ipset-proto4.conf 9b84b080ec6aa46459db0616a7057d2e
/etc/fail2ban/action.d/iptables-ipset-proto6-allports.conf 9630cf68fde9b58b901fbec8fab6c671
/etc/fail2ban/action.d/iptables-ipset-proto6.conf 55993b2d8e5b26b5757c45aaf61832db
/etc/fail2ban/action.d/iptables-multiport-log.conf e8cd3be31e4df1cf97166980bfda51df
/etc/fail2ban/action.d/iptables-multiport.conf 60db809a662e457bc0d0db1e0697972f
/etc/fail2ban/action.d/iptables-new.conf 007eb5748a82c583b791b353f1688c60
/etc/fail2ban/action.d/iptables-xt_recent-echo.conf 8fc6549c5e3a708712b4f82c1f389d1b
/etc/fail2ban/action.d/iptables.conf deb03a40d3b2080d0c277865828b6bec
/etc/fail2ban/action.d/mail-buffered.conf e3432dfcf92d8e67f43506a5bb54efbb
/etc/fail2ban/action.d/mail-whois-common.conf 300c15fdc7b9385589932e6ff8d058de
/etc/fail2ban/action.d/mail-whois-lines.conf 825f81fc6cd2dc951eadccbcc4043af9
/etc/fail2ban/action.d/mail-whois.conf 7da960c64f22cff9b753e587bec8da2d
/etc/fail2ban/action.d/mail.conf cb8d717f5b982f64d655fd11772c18cc
/etc/fail2ban/action.d/mynetwatchman.conf ce15ba6360c8208e0acc423a6aaae773
/etc/fail2ban/action.d/nftables-allports.conf dcd63ee1ae700ce71db944b51e13971c
/etc/fail2ban/action.d/nftables-common.conf d37784407a5dd006d04e65085d8a44b4
/etc/fail2ban/action.d/nftables-multiport.conf d3ce000091aeea150433a155f722a40d
/etc/fail2ban/action.d/npf.conf 2b829f3948221d63fac3b3a5dc8b5678
/etc/fail2ban/action.d/nsupdate.conf c4a82bafa5b6cb0b68f007993656e216
/etc/fail2ban/action.d/osx-afctl.conf a083fe23f1ceab7d175b4136eea82332
/etc/fail2ban/action.d/osx-ipfw.conf 4e029c2591ebc57d10316968885b4e36
/etc/fail2ban/action.d/pf.conf 406243926bf77aa68ef892ade6f9adf2
/etc/fail2ban/action.d/route.conf 435129bb799264371fa14896444d756e
/etc/fail2ban/action.d/sendmail-buffered.conf b96b9b55b351e679c67275763e6b39dc
/etc/fail2ban/action.d/sendmail-common.conf 4e578c6caf8bdf98b6c9e43e96356f21
/etc/fail2ban/action.d/sendmail-geoip-lines.conf 6a7b586f5c3f6856ce06e5c136f8f0d9
/etc/fail2ban/action.d/sendmail-whois-ipjailmatches.conf 700d49256af95e68f80451aa024f364a
/etc/fail2ban/action.d/sendmail-whois-ipmatches.conf 0fad982eff64af17e716602b4fc619a9
/etc/fail2ban/action.d/sendmail-whois-lines.conf a3f6f8d5338cd75fcb60f79d85f9d0b6
/etc/fail2ban/action.d/sendmail-whois-matches.conf e949c08d0b8cc9b2bd757852bb76b418
/etc/fail2ban/action.d/sendmail-whois.conf 1d27c2ba3edd3219ddc469360a076b43
/etc/fail2ban/action.d/sendmail.conf 2dae28fccb3eed557e879f9de9410ab9
/etc/fail2ban/action.d/shorewall-ipset-proto6.conf 12d9906298372ccce2dcfaac09ad738e
/etc/fail2ban/action.d/shorewall.conf b230c417d1d2d24b86ace552db970ec4
/etc/fail2ban/action.d/smtp.py de9531a474c3f329b4beab992dac6576
/etc/fail2ban/action.d/symbiosis-blacklist-allports.conf 1075d8df5771e8b8c8604c25ba0b2560
/etc/fail2ban/action.d/ufw.conf 5820438f9f6dbc4e1392902a7e152d28
/etc/fail2ban/action.d/xarf-login-attack.conf fea41479e7b7a7f3470fffc55ab9e992
/etc/fail2ban/fail2ban.conf 95f5c2b1257c50c023100ea5f1be8988
/etc/fail2ban/filter.d/3proxy.conf 5a7119810d7df1bcd214a79f01dbaab6
/etc/fail2ban/filter.d/apache-auth.conf cdc938570a5402b03c57eae00ac8ebdd
/etc/fail2ban/filter.d/apache-badbots.conf 290ec55479589944fff2b40c01604b22
/etc/fail2ban/filter.d/apache-botsearch.conf dcde47ec46fc17104f030557ef14834e
/etc/fail2ban/filter.d/apache-common.conf 6e43c7894974d9c626617b4ae0bb0f60
/etc/fail2ban/filter.d/apache-fakegooglebot.conf dba1f61503df0d409a3c61e333289993
/etc/fail2ban/filter.d/apache-modsecurity.conf 1433c994509fffcea3ee49a6f421b651
/etc/fail2ban/filter.d/apache-nohome.conf 787fae6f13398d03ba5aada47c0b38ec
/etc/fail2ban/filter.d/apache-noscript.conf 3ec68986b2167e7dabb274fb8fea423c
/etc/fail2ban/filter.d/apache-overflows.conf 279d1e16640504ebd71bad39e0514d03
/etc/fail2ban/filter.d/apache-pass.conf 82103abba327bf8e59dc20149585fcb1
/etc/fail2ban/filter.d/apache-shellshock.conf c87565a7cd9cf026c8108410725f6311
/etc/fail2ban/filter.d/assp.conf e91c43f501c3f77470205016ea872235
/etc/fail2ban/filter.d/asterisk.conf 2505ea39bf398a03c52018aef9fc3115
/etc/fail2ban/filter.d/botsearch-common.conf 0b681c2407bdfd57c209fd8032e4f83a
/etc/fail2ban/filter.d/common.conf 8dadb357ae538b568c4d0d511426fc7e
/etc/fail2ban/filter.d/counter-strike.conf 79e42c0a4e0c823595117c08bb9a1492
/etc/fail2ban/filter.d/courier-auth.conf f60c47aef464d47dd1cc9c7512dc77ea
/etc/fail2ban/filter.d/courier-smtp.conf 19e52b31c83f2f982bbe746df173e5e9
/etc/fail2ban/filter.d/cyrus-imap.conf 3a6dd19dafb6b8a6707ff1c966cebc78
/etc/fail2ban/filter.d/directadmin.conf 1fd4ca1713a9a37352f57dc742f2e8b8
/etc/fail2ban/filter.d/dovecot.conf 614356e426b91a9a5b7f6c33c5ee6a4b
/etc/fail2ban/filter.d/dropbear.conf 5a0ade98716c708aa2427cf38aaacf32
/etc/fail2ban/filter.d/drupal-auth.conf eec0094b0e03eb943f2b2ddfddefd905
/etc/fail2ban/filter.d/ejabberd-auth.conf 96b889e1c1dfbbca074c046b4727d4c9
/etc/fail2ban/filter.d/exim-common.conf 9f24019f5ca808d08218e8a0efef8bf2
/etc/fail2ban/filter.d/exim-spam.conf 1632006b4443aa764ca5b04bfbfa1e18
/etc/fail2ban/filter.d/exim.conf 04a3256233e259587902d306719505e3
/etc/fail2ban/filter.d/freeswitch.conf 7d734116e13656fed1afa79917d061b0
/etc/fail2ban/filter.d/froxlor-auth.conf 16b68a31e2de7869b4505b5fb69a04be
/etc/fail2ban/filter.d/groupoffice.conf b7cbbcf7013c493834efa3ce81216f7c
/etc/fail2ban/filter.d/gssftpd.conf 468f015e1687e621e351ba8e13135f27
/etc/fail2ban/filter.d/guacamole.conf 125b355e0954948d2ac33fb398069a3f
/etc/fail2ban/filter.d/haproxy-http-auth.conf 44af4d4c953227634eed8b1eee72908c
/etc/fail2ban/filter.d/horde.conf 0bcee5c60b5e0714cdbe8d12c17d03cf
/etc/fail2ban/filter.d/ignorecommands/apache-fakegooglebot 62345d37610e2d8da80d94e7d704e7d5
/etc/fail2ban/filter.d/kerio.conf 6e86afb25c05f5b5edf4c1bf517bda0b
/etc/fail2ban/filter.d/lighttpd-auth.conf f679d27c544f91bcc54b75d86e8d9e08
/etc/fail2ban/filter.d/mongodb-auth.conf 68aebabbab4b51573230acf7975a0cbc
/etc/fail2ban/filter.d/monit.conf 3a231eb1526bd1ab87b0dd3472c2f1a9
/etc/fail2ban/filter.d/murmur.conf 10d35ffa4ca8cabb7dd9b09c81a3ba7e
/etc/fail2ban/filter.d/mysqld-auth.conf 71846498533a29c2424ff4e5331df72a
/etc/fail2ban/filter.d/nagios.conf 2f38bc0aee9c787baceb1af97ab98867
/etc/fail2ban/filter.d/named-refused.conf e8a0fd446b38b77574fae7c0bbb8b016
/etc/fail2ban/filter.d/nginx-botsearch.conf 5eaf4c17c26e43c49d4b194b2e3a5ae8
/etc/fail2ban/filter.d/nginx-http-auth.conf 8b087788d7f14d04fac9b687144caa8f
/etc/fail2ban/filter.d/nginx-limit-req.conf 997ea98f8a69d967ef4c435be756dc2a
/etc/fail2ban/filter.d/nsd.conf 8abbe9669f6341f188d4aff221a66207
/etc/fail2ban/filter.d/openhab.conf 27c959521fb158c81a443f5ea1ef1f01
/etc/fail2ban/filter.d/openwebmail.conf 6a27aa31db87833bd5456df7e01ff173
/etc/fail2ban/filter.d/oracleims.conf e4bbd961afc180d9ca2d32345ebf0995
/etc/fail2ban/filter.d/pam-generic.conf 4a562b7938b4793dc4538a27e5a40456
/etc/fail2ban/filter.d/perdition.conf 0cc5ea440cf9f71777e01e011a27490f
/etc/fail2ban/filter.d/php-url-fopen.conf ec947bd6d28781ff0f07a6a98c8fe280
/etc/fail2ban/filter.d/portsentry.conf e3259efa7a10651247fb75ddefa78e14
/etc/fail2ban/filter.d/postfix-rbl.conf 3cda70f2da9f3094f264226231416dd1
/etc/fail2ban/filter.d/postfix-sasl.conf 96c579e4864264a304570c82d753cd99
/etc/fail2ban/filter.d/postfix.conf b6da3eaeb28e3e6254bd2b89bf3c1d6f
/etc/fail2ban/filter.d/proftpd.conf 3e1ca102c24654e1f34848ac8a2c2341
/etc/fail2ban/filter.d/pure-ftpd.conf b0770ea94f0f3c41a9a75a7b8a4459a3
/etc/fail2ban/filter.d/qmail.conf fb1af4aca05230c58e61dbc8c31e458d
/etc/fail2ban/filter.d/recidive.conf dc70498dc4cf0c669b3e5de18c037ba3
/etc/fail2ban/filter.d/roundcube-auth.conf d1b33039f92f6fc4ba877ca21428fed6
/etc/fail2ban/filter.d/screensharingd.conf 7f9c1fe844dabf6ff53cb8425557f7cb
/etc/fail2ban/filter.d/selinux-common.conf 7b07141322e66965aef0634969376815
/etc/fail2ban/filter.d/selinux-ssh.conf a86b87975e0fd4b09a185b724bc6063d
/etc/fail2ban/filter.d/sendmail-auth.conf 8355f2ce2dbf7151122e0c9ce0f933d8
/etc/fail2ban/filter.d/sendmail-reject.conf 5316a1c07f95da3975146453b324f7e8
/etc/fail2ban/filter.d/sieve.conf a8a6805d10f038fd0e1c6f2db2ca7fd5
/etc/fail2ban/filter.d/slapd.conf 85398477ff48b6d9e3b9269aedb95897
/etc/fail2ban/filter.d/sogo-auth.conf 5873b7613a11c00b5ae95e7f615b21c4
/etc/fail2ban/filter.d/solid-pop3d.conf 59c995616b30851d11e85e5cd6e95560
/etc/fail2ban/filter.d/squid.conf 6bfeff764562907a568d32bda735c828
/etc/fail2ban/filter.d/squirrelmail.conf 738bcc80c52f09e1135e9963520fa1d7
/etc/fail2ban/filter.d/sshd-ddos.conf 4ff258180e28679de1a5409e5becf209
/etc/fail2ban/filter.d/sshd.conf 5304ac06cce63f2e91d625f6831c8920
/etc/fail2ban/filter.d/stunnel.conf 0bca290a15f504a8fc7d265768919d53
/etc/fail2ban/filter.d/suhosin.conf 748e3a3b2fc4db318837d58660112593
/etc/fail2ban/filter.d/tine20.conf fb2c596c330e36db2c41b45f53765089
/etc/fail2ban/filter.d/uwimap-auth.conf f8f8fb6ed7216c55e5843c590ede5abf
/etc/fail2ban/filter.d/vsftpd.conf b5251ece30d8137d6e574eb74df2458d
/etc/fail2ban/filter.d/webmin-auth.conf 1ddf0787de3fdf6d5452c56b0f047c19
/etc/fail2ban/filter.d/wuftpd.conf fbf0107c53f138e8c5ce18f0e9b08b4c
/etc/fail2ban/filter.d/xinetd-fail.conf dbc58da808890b2f640a9d27a2643d38
/etc/fail2ban/jail.conf 58df9a6077ee3350a63fec9bfbeaaf63
/etc/fail2ban/jail.d/defaults-debian.conf 55ef21bbd8af425ad41776fa2cd6b8c7
/etc/fail2ban/paths-common.conf 4363caafbe1e308dac02fbdd34f5bca5
/etc/fail2ban/paths-debian.conf f6d36535ff15b0f573fbaefb326b4205
/etc/fail2ban/paths-opensuse.conf 89fae123936bb20eb888290319bfabf9
/etc/init.d/fail2ban 5bd86fe320e4a98c0788345b6eb92d5c
/etc/logrotate.d/fail2ban ff75a1abeb9b363785267f940245d2d1
/etc/monit/monitrc.d/fail2ban 2458d0ccd1a0e2a43beb99d328047cb6
Description: ban hosts that cause multiple authentication errors
Fail2ban monitors log files (e.g. /var/log/auth.log,
/var/log/apache/access.log) and temporarily or persistently bans
failure-prone addresses by updating existing firewall rules. Fail2ban
allows easy specification of different actions to be taken such as to ban
an IP using iptables or hostsdeny rules, or simply to send a notification
email.
.
By default, it comes with filter expressions for various services
(sshd, apache, qmail, proftpd, sasl etc.) but configuration can be
easily extended for monitoring any other text file. All filters and
actions are given in the config files, thus fail2ban can be adopted
to be used with a variety of files and firewalls. Following recommends
are listed:
.
- iptables -- default installation uses iptables for banning. You most
probably need it
- whois -- used by a number of *mail-whois* actions to send notification
emails with whois information about attacker hosts. Unless you will use
those you don't need whois
- python3-pyinotify -- unless you monitor services logs via systemd, you
need pyinotify for efficient monitoring for log files changes
Homepage: http://www.fail2ban.org
Package: python-rfc3339
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 32
Maintainer: Debian Let's Encrypt <letsencrypt-devel@lists.alioth.debian.org>
Architecture: all
Source: pyrfc3339
Version: 1.0-4
Depends: python-tz, python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: parser and generator of RFC 3339-compliant timestamps (Python 2)
pyRFC3339 parses and generates RFC 3339-compliant timestamps using Python
datetime.datetime objects.
.
This is the Python 2 module.
Homepage: https://pypi.python.org/pypi/pyRFC3339
Package: console-setup
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 437
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.164
Depends: console-setup-linux | console-setup-freebsd | hurd, xkb-data (>= 0.9), keyboard-configuration (= 1.164)
Pre-Depends: debconf (>= 1.5.34)
Suggests: lsb-base (>= 3.0-6), locales
Breaks: lsb (<< 2.0-6), lsb-base (<< 3.0-6), lsb-core (<< 2.0-6)
Conflicts: console-setup-mini
Description: console font and keymap setup program
This package provides the console with the same keyboard
configuration scheme as the X Window System. As a result, there is no
need to duplicate or change the keyboard files just to make simple
customizations such as the use of dead keys, the key functioning as
AltGr or Compose key, the key(s) to switch between Latin and
non-Latin mode, etc.
.
The package also installs console fonts supporting many of the
world's languages. It provides an unified set of font faces - the
classic VGA, the simplistic Fixed, and the cleaned Terminus,
TerminusBold and TerminusBoldVGA.
Package: libtinfo5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 478
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.16)
Breaks: dialog (<< 1.2-20130523)
Description: shared low-level terminfo library for terminal handling
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains the shared low-level terminfo library.
Homepage: http://invisible-island.net/ncurses/
Package: libapt-inst2.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 466
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 1.4.11
Provides: libapt-inst (= 1.4.11)
Depends: libapt-pkg5.0 (>= 1.1~exp9), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Description: deb package format runtime library
This library provides methods to query and extract information
from deb packages. This includes the control data and the package
file content.
Package: libgdbm3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 68
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.8.3-14
Depends: libc6 (>= 2.14), dpkg (>= 1.15.4) | install-info
Description: GNU dbm database routines (runtime version)
GNU dbm ('gdbm') is a library of database functions that use extendible
hashing and works similarly to the standard UNIX 'dbm' functions.
.
The basic use of 'gdbm' is to store key/data pairs in a data file, thus
providing a persistent version of the 'dictionary' Abstract Data Type
('hash' to perl programmers).
Homepage: http://directory.fsf.org/project/gdbm/
Package: libnet-libidn-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 63
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libnet-libidn-perl (0.12.ds-2)
Version: 0.12.ds-2+b3
Depends: perl (>= 5.24.1~rc3-2), perlapi-5.24.1, libc6 (>= 2.4), libidn11 (>= 1.13)
Description: Perl bindings for GNU Libidn
Provides bindings for GNU Libidn, a C library for handling Internationalized
Domain Names according to IDNA (RFC 3490), in a way very much inspired by
Turbo Fredriksson's PHP-IDN.
Homepage: https://metacpan.org/release/Net-LibIDN
Package: libfontconfig1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 486
Maintainer: Keith Packard <keithp@debian.org>
Architecture: amd64
Multi-Arch: same
Source: fontconfig (2.11.0-6.7)
Version: 2.11.0-6.7+b1
Provides: libfontconfig
Depends: libc6 (>= 2.14), libexpat1 (>= 2.0.1), libfreetype6 (>= 2.2.1), fontconfig-config (>= 2.11.0-6.7)
Breaks: xpdf (<= 3.03-11)
Description: generic font configuration library - runtime
Fontconfig is a font configuration and customization library, which
does not depend on the X Window System. It is designed to locate
fonts within the system and select them according to requirements
specified by applications.
.
This package contains the runtime library needed to launch applications
using fontconfig.
Package: php-apcu
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 198
Maintainer: Debian PHP PECL Maintainers <pkg-php-pecl@lists.alioth.debian.org>
Architecture: amd64
Version: 5.1.8+4.0.11-1
Replaces: php-user-cache
Provides: php-user-cache, php7.0-apcu
Depends: php-common (>= 1:7.0+33~), phpapi-20151012, libc6 (>= 2.14)
Recommends: php-apcu-bc
Suggests: php-gd
Conflicts: php-user-cache, php-xcache, php-yac
Conffiles:
/etc/php/7.0/mods-available/apcu.ini 63cdaa57c6c9a68ce51c0862bc1b74a0
Description: APC User Cache for PHP
The APCu is userland caching: APC (Alternative PHP Cache) stripped of
opcode caching after the deployment of Zend OpCache in PHP 5.5 as the
primary solution to opcode caching in future versions of PHP.
.
The APCu is a fast solution for userland caching (and dumping) of PHP
variables locally, it is not distributed like MemcacheD, but they can
be used together for optimal caching.
Homepage: http://pecl.php.net/package/APCu
Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 7551
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Source: perl
Version: 5.24.1-3+deb9u7
Replaces: libfile-path-perl (<< 2.12.01), libfile-temp-perl (<< 0.2304), libio-socket-ip-perl (<< 0.37), libscalar-list-utils-perl (<< 1:1.42.02), libsocket-perl (<< 2.020.03), libxsloader-perl (<< 0.22), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perlapi-5.24.1
Pre-Depends: libc6 (>= 2.23), dpkg (>= 1.17.17)
Suggests: perl
Breaks: amanda-common (<< 1:3.3.9-2), autoconf2.13 (<< 2.13-45), backuppc (<< 3.3.1-2), dh-haskell (<< 0.3), libalien-wxwidgets-perl (<< 0.65+dfsg-2), libanyevent-perl (<< 7.070-2), libcommon-sense-perl (<< 3.72-2~), libexception-class-perl (<< 1.42), libfile-path-perl (<< 2.12.01), libfile-spec-perl (<< 3.6301), libfile-temp-perl (<< 0.2304), libgtk2-perl-doc (<< 2:1.2491-4), libio-socket-ip-perl (<< 0.37), libjcode-perl (<< 2.13-3), libmarc-charset-perl (<< 1.2), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.42.02), libsocket-perl (<< 2.020.03), libxsloader-perl (<< 0.22), mailagent (<< 1:3.1-81-2), pdl (<< 1:2.007-4), perl (<< 5.24.1~), perl-modules (<< 5.24.1~), texinfo (<< 6.1.0.dfsg.1-8)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
Perl is a scripting language used in many system scripts and utilities.
.
This package provides a Perl interpreter and the small subset of the
standard run-time library required to perform basic tasks. For a full
Perl installation, install "perl" (and its dependencies, "perl-modules-5.24"
and "perl-doc").
Homepage: http://dev.perl.org/perl5/
Package: libudev1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 225
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 232-25+deb9u14
Depends: libc6 (>= 2.16)
Description: libudev shared library
This library provides access to udev device information.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Package: libperl5.24
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 20936
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Multi-Arch: same
Source: perl
Version: 5.24.1-3+deb9u7
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl (<< 2.069), libcompress-raw-zlib-perl (<< 2.069), libcompress-zlib-perl (<< 2.069.001), libdigest-md5-perl (<< 2.54), libdigest-sha-perl (<< 5.95.01), libencode-perl (<< 2.86), libio-compress-base-perl (<< 2.069.001), libio-compress-bzip2-perl (<< 2.069.001), libio-compress-perl (<< 2.069.001), libio-compress-zlib-perl (<< 2.069.001), libmime-base64-perl (<< 3.15), libmodule-corelist-perl (<< 2.14-2), libstorable-perl (<< 2.56.01), libsys-syslog-perl (<< 0.33.01), libthreads-perl (<< 2.07), libthreads-shared-perl (<< 1.51), libtime-hires-perl (<< 1.9733), libtime-piece-perl (<< 1.31), perl (<< 5.22.0~), perl-base (<< 5.22.0~)
Provides: libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl, libdigest-md5-perl, libdigest-sha-perl, libencode-perl, libio-compress-base-perl, libio-compress-bzip2-perl, libio-compress-perl, libio-compress-zlib-perl, libmime-base64-perl, libstorable-perl, libsys-syslog-perl, libthreads-perl, libthreads-shared-perl, libtime-hires-perl, libtime-piece-perl, perl-cross-config
Depends: libbz2-1.0, libc6 (>= 2.23), libdb5.3, libgdbm3 (>= 1.8.3), zlib1g (>= 1:1.2.2.3), perl-modules-5.24 (>= 5.24.1-3+deb9u7)
Breaks: dh-make-perl (<< 0.73-1), ftpmirror (<< 1.96+dfsg-13), libcompress-raw-bzip2-perl (<< 2.069), libcompress-raw-zlib-perl (<< 2.069), libcompress-zlib-perl (<< 2.069.001), libdigest-md5-perl (<< 2.54), libdigest-sha-perl (<< 5.95.01), libencode-perl (<< 2.86), libhtml-template-compiled-perl (<< 0.95-1), libio-compress-base-perl (<< 2.069.001), libio-compress-bzip2-perl (<< 2.069.001), libio-compress-perl (<< 2.069.001), libio-compress-zlib-perl (<< 2.069.001), libload-perl (<< 0.20-1), libmime-base64-perl (<< 3.15), libnet-jifty-perl (<< 0.14-1), libperl-apireference-perl (<< 0.09-1), libregexp-optimizer-perl (<< 0.15-3), libsoap-lite-perl (<< 0.712-4), libstorable-perl (<< 2.56.01), libsys-syslog-perl (<< 0.33.01), libthreads-perl (<< 2.07), libthreads-shared-perl (<< 1.51), libtime-hires-perl (<< 1.9733), libtime-piece-perl (<< 1.31), libxml-parser-lite-tree-perl (<< 0.14-1), libyaml-perl (<< 0.73-1), mrtg (<< 2.16.3-3.1)
Description: shared Perl library
This package contains the shared Perl library, used by applications
which embed a Perl interpreter.
.
It also contains the architecture-dependent parts of the standard
library (and depends on perl-modules-5.24 which contains the
architecture-independent parts).
Homepage: http://dev.perl.org/perl5/
Package: libio-stringy-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 135
Maintainer: Bart Martens <bartm@debian.org>
Architecture: all
Source: io-stringy
Version: 2.111-2
Depends: perl
Description: Perl modules for IO from scalars and arrays
The libio-stringy-perl package (which corresponds to the CPAN package
IO-stringy) provides the following Perl modules:
IO::AtomicFile Write a file which is updated atomically
IO::Lines I/O handle to read/write to array of lines
IO::Scalar I/O handle to read/write to a string
IO::ScalarArray I/O handle to read/write to array of scalars
IO::Wrap Wrap old-style FHs in standard OO interface
IO::WrapTie Tie your handles & retain full OO interface
Homepage: http://search.cpan.org/dist/IO-stringy/
Package: libnettle6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 357
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.3-1+deb9u1
Depends: libc6 (>= 2.14)
Description: low level cryptographic library (symmetric and one-way cryptos)
Nettle is a cryptographic library that is designed to fit easily in more or
less any context: In crypto toolkits for object-oriented languages (C++,
Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
space.
.
It tries to solve a problem of providing a common set of cryptographic
algorithms for higher-level applications by implementing a
context-independent set of cryptographic algorithms. In that light, Nettle
doesn't do any memory allocation or I/O, it simply provides the
cryptographic algorithms for the application to use in any environment and
in any way it needs.
.
This package contains the symmetric and one-way cryptographic
algorithms. To avoid having this package depend on libgmp, the
asymmetric cryptos reside in a separate library, libhogweed.
Homepage: http://www.lysator.liu.se/~nisse/nettle/
Package: python-setuptools
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1013
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 33.1.1-1
Provides: python-distribute
Depends: python-pkg-resources (= 33.1.1-1), python:any (<< 2.8), python:any (>= 2.7.5-5~)
Suggests: python-setuptools-doc
Description: Python Distutils Enhancements
Extensions to the python-distutils for large or complex distributions.
Homepage: https://pypi.python.org/pypi/setuptools
Package: clamav-docs
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 8960
Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: clamav
Version: 0.103.6+dfsg-0+deb9u1
Description: anti-virus utility for Unix - documentation
Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
this software is the integration with mail servers (attachment
scanning). The package provides a flexible and scalable
multi-threaded daemon in the clamav-daemon package, a command-line
scanner in the clamav package, and a tool for automatic updating via
the Internet in the clamav-freshclam package. The programs are based
on libclamav, which can be used by other software.
.
This package contains the documentation for the ClamAV suite.
Homepage: https://www.clamav.net/
Package: libxapian30
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2563
Maintainer: Olly Betts <olly@survex.com>
Architecture: amd64
Multi-Arch: same
Source: xapian-core
Version: 1.4.3-2+deb9u3
Depends: libc6 (>= 2.15), libgcc1 (>= 1:3.4), libstdc++6 (>= 5.2), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: xapian-tools
Description: Search engine library
This package contains the core Xapian runtime library.
.
The Xapian search engine library is a highly adaptable toolkit which allows
developers to easily add advanced indexing and search facilities to their own
applications. It implements the probabilistic model of information retrieval,
and provides facilities for performing ranked free-text searches, relevance
feedback, phrase searching, boolean searching, stemming, and simultaneous
update and searching. It is highly scalable, and is capable of working with
collections containing hundreds of millions of documents.
Homepage: https://xapian.org/
Package: git-man
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 1486
Maintainer: Gerrit Pape <pape@smarden.org>
Architecture: all
Multi-Arch: foreign
Source: git
Version: 1:2.11.0-3+deb9u7
Replaces: git (<< 1:1.7.4~rc1), git-core (<< 1:1.7.0.4-1.)
Breaks: git (<< 1:1.7.4~rc1)
Description: fast, scalable, distributed revision control system (manual pages)
Git is popular version control system designed to handle very large
projects with speed and efficiency; it is used for many high profile
open source projects, most notably the Linux kernel.
.
Git falls in the category of distributed source code management tools.
Every Git working directory is a full-fledged repository with full
revision tracking capabilities, not dependent on network access or a
central server.
.
This package provides reference documentation for use by the 'man'
utility and the 'git help' command.
Homepage: https://git-scm.com/
Package: ufw
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 828
Maintainer: Jamie Strandboge <jamie@ubuntu.com>
Architecture: all
Version: 0.35-4
Depends: iptables, lsb-base (>= 3.0-6), ucf, python3:any (>= 3.3.2-2~), debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~)
Suggests: rsyslog
Conffiles:
/etc/default/ufw ef91ecde4a64da5c98da8968849804d5
/etc/init.d/ufw 4156943ab8a824fcf4b04cc1362eb230
/etc/init/ufw.conf b85f80257c81675ef38e9db139fb0921
/etc/logrotate.d/ufw 12b1fb7cee76fc46f161e1ead1a22ce6
/etc/rsyslog.d/20-ufw.conf 98e2f72c9c65ca8d6299886b524e80d1
/etc/ufw/applications.d/ufw-bittorent 0d5cac49dc7050f06f2e253f14e8b6c3
/etc/ufw/applications.d/ufw-chat 73204a7a2819499d7802bc83b7e63ee9
/etc/ufw/applications.d/ufw-directoryserver 28888bb4f7fa81ea2ca23bb86995df5b
/etc/ufw/applications.d/ufw-dnsserver 7a2634d40515a5baab2d5b355873e1e6
/etc/ufw/applications.d/ufw-fileserver d43adc11063000fc3c1a824071382047
/etc/ufw/applications.d/ufw-loginserver 366b3845c4360ea626f78875a400446b
/etc/ufw/applications.d/ufw-mailserver 37e7910a1da915bcf60dac1c2d157377
/etc/ufw/applications.d/ufw-printserver 47e009dc96a9eac7b3f2c2483a889756
/etc/ufw/applications.d/ufw-proxyserver 6e035b6921d41aeee89c3d5867c593c5
/etc/ufw/applications.d/ufw-webserver 07a41595f0b2c9865b7220bea998f8cf
/etc/ufw/sysctl.conf fc22218852be5d6d6216aee5552ce6a3
Description: program for managing a Netfilter firewall
The Uncomplicated FireWall is a front-end for iptables, to make managing a
Netfilter firewall easier. It provides a command line interface with syntax
similar to OpenBSD's Packet Filter. It is particularly well-suited as a
host-based firewall.
Homepage: https://launchpad.net/ufw
Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 720
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.11+dfsg-6
Replaces: cpio-mt
Depends: libc6 (>= 2.17)
Suggests: libarchive1
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
GNU cpio is a tool for creating and extracting archives, or copying
files from one place to another. It handles a number of cpio formats
as well as reading and writing tar files.
Homepage: http://www.gnu.org/software/cpio/
Package: keyboard-configuration
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2451
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: console-setup
Version: 1.164
Replaces: console-setup (<< 1.47), console-setup-mini (<< 1.47)
Depends: liblocale-gettext-perl
Pre-Depends: debconf (>= 1.5.34)
Breaks: console-setup (<< 1.71), console-setup-mini (<< 1.47)
Description: system-wide keyboard preferences
This package maintains the keyboard preferences in
/etc/default/keyboard. Other packages can use the information
provided by this package in order to configure the keyboard on the
console or in X Window.
Package: libpopt0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 224
Maintainer: Paul Martin <pm@debian.org>
Architecture: amd64
Multi-Arch: same
Source: popt (1.16-10)
Version: 1.16-10+b2
Replaces: popt
Depends: libc6 (>= 2.17)
Conflicts: libpopt-dev (<= 1.4-1), popt, rpm (<= 4.0.2-3)
Description: lib for parsing cmdline parameters
Popt was heavily influenced by the getopt() and getopt_long() functions,
but it allows more powerful argument expansion. It can parse arbitrary
argv[] style arrays and automatically set variables based on command
line arguments. It also allows command line arguments to be aliased via
configuration files and includes utility functions for parsing arbitrary
strings into argv[] arrays using shell-like rules.
.
This package contains the runtime library and locale data.
Homepage: http://rpm5.org/
Package: libtfm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 250
Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: tomsfastmath
Version: 0.13-4
Depends: libc6 (>= 2.14)
Description: Fast multiple-precision integer library [runtime]
TomsFastMath is a fast open source, large integer arithmetic library
written in portable ISO C. It is a port of LibTomMath with optional
support for inline assembler multipliers.
.
This package contains the library itself which is need to run programs
that use libtfm1.
Homepage: http://www.libtom.net/
Package: kmod
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 220
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: foreign
Version: 23-2
Depends: libc6 (>= 2.17), libkmod2 (= 23-2), lsb-base
Breaks: alsa-base (<= 1.0.25+3), oss-compat (= 4)
Conffiles:
/etc/init.d/kmod 82698019c962069b438bd2a82d9fa1e7
Description: tools for managing Linux kernel modules
This package contains a set of programs for loading, inserting, and
removing kernel modules for Linux.
It replaces module-init-tools.
Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 42
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: attr (1:2.4.47-2)
Version: 1:2.4.47-2+b2
Depends: libc6 (>= 2.4)
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
Contains the runtime environment required by programs that make use
of extended attributes.
Homepage: http://savannah.nongnu.org/projects/attr/
Package: libdiscover2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 257
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: amd64
Source: discover
Version: 2.1.2-7.1+deb9u1
Depends: libc6 (>= 2.14), libexpat1 (>= 2.0.1), libusb-0.1-4 (>= 2:0.1.12), discover-data (>> 2.2004.04)
Conflicts: discover (<< 2.0), discover1 (<< 2.0), libdiscover1 (<< 2.0)
Conffiles:
/etc/discover.conf.d/00discover 210206a7fc71cd0e5dae4836809e41e9
Description: hardware identification library
libdiscover is a library enabling identification of various PCI,
PCMCIA, and USB devices.
Package: libk5crypto3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 311
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.15-1+deb9u3
Depends: libc6 (>= 2.14), libkeyutils1 (>= 1.4), libkrb5support0 (>= 1.15~beta1)
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.10+dfsg~alpha1), libkrb5-3 (<= 1.8~aa)
Description: MIT Kerberos runtime libraries - Crypto Library
Kerberos is a system for authenticating users and services on a network.
Kerberos is a trusted third-party service. That means that there is a
third party (the Kerberos server) that is trusted by all the entities on
the network (users and services, usually called "principals").
.
This is the MIT reference implementation of Kerberos V5.
.
This package contains the runtime cryptography libraries used by
applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 96
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.43.4-2+deb9u2
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcomerr2, libc6 (>= 2.17)
Description: command-line interface parsing library
libss provides a simple command-line interface parser which will
accept input from the user, parse the command into an argv argument
vector, and then dispatch it to a handler function.
.
It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net
Package: libestr0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 32
Maintainer: Pierre Chifflier <pollux@debian.org>
Architecture: amd64
Source: libestr
Version: 0.1.10-2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Helper functions for handling strings (lib)
The 'libestr' library contains some essential string manipulation
functions and more, like escaping special characters.
.
This package contains the shared library.
Homepage: http://libestr.sourceforge.net/
Package: libdns162
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 4224
Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u12
Replaces: libbind0
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10), libcomerr2 (>= 1.01), libgeoip1, libgssapi-krb5-2 (>= 1.14+dfsg), libisc160, libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libssl1.0.2 (>= 1.0.2d), libxml2 (>= 2.7.4)
Conflicts: libbind0, libbind9-41
Description: DNS Shared Library used by BIND
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the libdns shared library used by BIND's daemons and
clients.
Package: python-urllib3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 303
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Version: 1.19.1-1+deb9u1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~), python-six
Recommends: ca-certificates, python-cryptography, python-idna, python-ipaddress, python-openssl
Suggests: python-ntlm, python-socks
Description: HTTP library with thread-safe connection pooling for Python
urllib3 supports features left out of urllib and urllib2 libraries.
.
- Re-use the same socket connection for multiple requests (HTTPConnectionPool
and HTTPSConnectionPool) (with optional client-side certificate
verification).
- File posting (encode_multipart_formdata).
- Built-in redirection and retries (optional).
- Supports gzip and deflate decoding.
- Thread-safe and sanity-safe.
- Small and easy to understand codebase perfect for extending and
building upon.
Homepage: http://urllib3.readthedocs.org
Package: libexpat1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 369
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.2.0-2+deb9u5
Depends: libc6 (>= 2.14)
Conflicts: wink (<= 1.5.1060-4)
Description: XML parsing C library - runtime library
This package contains the runtime, shared library of expat, the C
library for parsing XML. Expat is a stream-oriented parser in
which an application registers handlers for things the parser
might find in the XML document (like start tags).
Homepage: http://expat.sourceforge.net
Package: roundcube-core
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 12347
Maintainer: Debian Roundcube Maintainers <pkg-roundcube-maintainers@lists.alioth.debian.org>
Architecture: all
Source: roundcube
Version: 1.2.3+dfsg.1-4+deb9u10
Replaces: roundcube-plugins-extra (<= 0.6-20111030)
Depends: dbconfig-common, debconf, libapache2-mod-php | php, libmagic1, php-pear (>= 1:1.10.1), php-cli, php-intl, php-json, php-mcrypt, roundcube-mysql (= 1.2.3+dfsg.1-4+deb9u10) | roundcube-sqlite3 (= 1.2.3+dfsg.1-4+deb9u10) | roundcube-pgsql (= 1.2.3+dfsg.1-4+deb9u10), ucf, debconf (>= 0.5) | debconf-2.0, php-common, php-net-socket (>= 1.0.12), php-auth-sasl (>= 1.0.6), php-mail-mime (>= 1.10.0), php-net-smtp (>= 1.7.1)
Pre-Depends: dpkg (>= 1.17.14)
Recommends: apache2 | lighttpd | spawn-fcgi | php-fpm | httpd-cgi, php-gd, php-pspell
Suggests: roundcube-plugins, php-net-ldap2 (>= 2.2.0), php-crypt-gpg (>= 1.4.2), php-net-ldap3
Breaks: roundcube-plugins-extra (<= 0.6-20111030)
Conffiles:
/etc/cron.d/roundcube-core 2638a7ae5f06694b7ea664d6675bfb51
/etc/cron.daily/roundcube-core 7bcd60190ca405b0782b4a8a778316a1
/etc/default/roundcube-core 9c9a79db8e08aee4fcffbd9a8fa04d78
/etc/logrotate.d/roundcube-core 0a05271e7badc8e29e94cf08b7d2c912
/etc/roundcube/apache.conf 6cef7212459a48d402e2ef0c03f9b76a
/etc/roundcube/debian-db-roundcube.php 70424078579d6d669df6d94ec61874e2
/etc/roundcube/defaults.inc.php a8aa5213f12b939d0dd963a617c649a0
/etc/roundcube/htaccess 42d0054de28fd61d738f24f7f0994471
/etc/roundcube/lighttpd.conf 4fd181e1ce2c19b9410ce797747eaa18
/etc/roundcube/mimetypes.php 415f26e573d412b13610538e56322571
/etc/roundcube/plugins/jqueryui/config.inc.php 652e01ce456d78ed9db4a1e7ec97f0ec
Description: skinnable AJAX based webmail solution for IMAP servers
RoundCube Webmail is a browser-based multilingual IMAP client with an
application-like user interface. It provides full functionality
expected from an e-mail client, including MIME support, address book,
folder manipulation and message filters.
.
The user interface is fully skinnable using XHTML and CSS 2.
.
This package provides the core code for roundcube. You should install
it along with one of the roundcube database metapackages.
Homepage: https://www.roundcube.net/
Package: mariadb-client-10.1
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 45347
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb-10.1
Version: 10.1.26-0+deb9u1
Replaces: mariadb-client-10.0, mariadb-client-5.5, mariadb-server-10.0 (<< 10.0.13-1~), mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mytop, virtual-mysql-client
Provides: virtual-mysql-client
Depends: debianutils (>= 1.6), mariadb-client-core-10.1 (>= 10.1.26-0+deb9u1), perl:any, libaio1 (>= 0.3.93), libc6 (>= 2.17), libjemalloc1 (>= 2.1.1), libpcre3, libstdc++6 (>= 5.2), libsystemd0, zlib1g (>= 1:1.2.0)
Recommends: libdbd-mysql-perl (>= 1.2202), libdbi-perl, libterm-readkey-perl
Breaks: mariadb-client-10.0, mariadb-client-5.5, mariadb-server-10.0 (<< 10.0.13-1~), mysql-client-5.5, mysql-client-5.6, mysql-client-5.7
Conflicts: mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mytop, virtual-mysql-client
Conffiles:
/etc/mysql/mariadb.conf.d/50-client.cnf 5898a2c9f6b119afac615d3377f2db49
/etc/mysql/mariadb.conf.d/50-mysql-clients.cnf 593e201008e699b8af7abcf9eb6c5d88
Description: MariaDB database client binaries
MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
server. SQL (Structured Query Language) is the most popular database query
language in the world. The main goals of MariaDB are speed, robustness and
ease of use.
.
This package includes the client binaries and the additional tools
innotop and mysqlreport.
Homepage: https://mariadb.org/
Package: php-psr-log
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 36
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Version: 1.0.0-4
Depends: php-common
Description: common interface for logging libraries
The main goal is to allow libraries to receive a Psr\Log\LoggerInterface object
and write logs to it in a simple and universal way. Frameworks and CMSs that
have custom needs MAY extend the interface for their own purpose, but SHOULD
remain compatible with this document. This ensures that the third-party
libraries an application uses can write to the centralized application logs.
.
The LoggerInterface exposes eight methods to write logs to the eight RFC 5424
levels (debug, info, notice, warning, error, critical, alert, emergency).
.
A ninth method, log, accepts a log level as first argument. Calling this method
with one of the log level constants MUST have the same result as calling the
level-specific method. Calling this method with a level not defined by this
specification MUST throw a Psr\Log\InvalidArgumentException if the
implementation does not know about the level. Users SHOULD NOT use a custom
level without knowing for sure the current implementation supports it.
.
Note that this is not a logger of its own. It is merely an interface that
describes a logger. See the specification for more details.
Homepage: https://github.com/php-fig/log
Package: libcc1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 87
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Description: GCC cc1 plugin for GDB
libcc1 is a plugin for GDB.
Homepage: http://gcc.gnu.org/
Package: libmailtools-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 212
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Version: 2.18-1
Replaces: mailtools (<= 1.15-1)
Provides: libmail-perl, mailtools
Depends: perl, libnet-perl, libtimedate-perl, libnet-smtp-ssl-perl
Conflicts: mailtools (<= 1.15-1)
Description: Manipulate email in perl programs
This is a set of perl modules which provide an easy interface to
manipulating email in an object-oriented fashion.
Homepage: http://search.cpan.org/dist/MailTools/
Package: php-symfony-finder
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 200
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Source: symfony
Version: 2.8.7+dfsg-1.3+deb9u3
Depends: php-common
Description: find files and directories
The Symfony Finder Component provides an intuitive interface to
find files and directories.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com/doc/2.8/components/finder.html
Package: php-phpseclib
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1190
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Version: 2.0.4-1
Replaces: php-seclib (>= 2)
Provides: php-seclib (= 2.0.4-1)
Depends: php-common
Suggests: php-libsodium, php-mcrypt, php-gmp
Conflicts: php-seclib (>= 2)
Description: implementations of an arbitrary-precision integer arithmetic library
The PHP Secure Communications Library are fully PKCS#1 (v2.1) compliant
RSA, DES, 3DES, RC4, Rijndael, AES, Blowfish, Twofish, SSH-1, SSH-2, SFTP, and
X.509 implementations.
Homepage: http://phpseclib.sourceforge.net/
Package: make
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1211
Maintainer: Manoj Srivastava <srivasta@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: make-dfsg
Version: 4.1-9.1
Replaces: make-guile
Depends: libc6 (>= 2.17)
Suggests: make-doc
Conflicts: make-guile
Description: utility for directing compilation
GNU Make is a utility which controls the generation of executables
and other target files of a program from the program's source
files. It determines automatically which pieces of a large program
need to be (re)created, and issues the commands to (re)create
them. Make can be used to organize any task in which targets (files)
are to be automatically updated based on input files whenever the
corresponding input is newer --- it is not limited to building
computer programs. Indeed, Make is a general purpose dependency
solver.
Homepage: http://www.gnu.org/software/make/
Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 338
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: xz-utils
Version: 5.2.2-1.2+deb9u1
Depends: libc6 (>= 2.17)
Description: XZ-format compression library
XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
compression format, which provides memory-hungry but powerful
compression (often better than bzip2) and fast, easy decompression.
.
The native format of liblzma is XZ; it also supports raw (headerless)
streams and the older LZMA format used by lzma. (For 7-Zip's related
format, use the p7zip package instead.)
Homepage: http://tukaani.org/xz/
Package: libasan3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1259
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.23), libgcc1 (>= 1:3.3), libstdc++6 (>= 4.1.1)
Description: AddressSanitizer -- a fast memory error detector
AddressSanitizer (ASan) is a fast memory error detector. It finds
use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs.
Homepage: http://gcc.gnu.org/
Package: fontconfig-config
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 420
Maintainer: Keith Packard <keithp@debian.org>
Architecture: all
Multi-Arch: foreign
Source: fontconfig
Version: 2.11.0-6.7
Replaces: fontconfig (<< 2.3.2-2)
Depends: debconf (>= 0.5) | debconf-2.0, ucf (>= 0.29), fonts-dejavu-core | ttf-bitstream-vera | fonts-liberation | fonts-freefont
Conflicts: fontconfig (<< 2.3.2-2)
Conffiles:
/etc/fonts/conf.d/README 42d13304ed2e9e5b60b74d6ed29b3729
/etc/fonts/fonts.conf 90f86b7936529b7dbbf19825c27cd3b0
Description: generic font configuration library - configuration
Fontconfig is a font configuration and customization library, which
does not depend on the X Window System. It is designed to locate
fonts within the system and select them according to requirements
specified by applications.
.
This package contains the configuration files and scripts for fontconfig.
Package: ruby-rack
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 360
Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.6.4-4+deb9u2
Depends: ruby | ruby-interpreter
Description: modular Ruby webserver interface
Rack provides a minimal, modular and adaptable interface for developing
web applications in Ruby. By wrapping HTTP requests and responses in
the simplest way possible, it unifies and distills the API for web
servers, web frameworks, and software in between (the so-called
middleware) into a single method call.
.
Also see http://rack.github.io/.
Homepage: https://rack.github.io/
Ruby-Versions: all
Package: cloud-utils
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 17
Maintainer: Tiago Ilieve <tiago.myhro@gmail.com>
Architecture: all
Version: 0.29-1
Depends: cloud-guest-utils, cloud-image-utils
Description: metapackage for installation of upstream cloud-utils source
This metapackage will depend on all sub-packages built by the
upstream cloud-utils source.
Homepage: https://launchpad.net/cloud-utils
Package: libhttp-date-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 56
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.02-1
Replaces: libwww-perl (<< 6.00)
Depends: perl, libtimedate-perl
Breaks: libwww-perl (<< 6.00)
Description: module of date conversion routines
HTTP::Date provides functions that deal the date formats used by the HTTP
protocol (and then some more). Only the first two functions, time2str() and
str2time(), are exported by default.
Homepage: http://search.cpan.org/dist/HTTP-Date/
Package: klibc-utils
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 395
Maintainer: maximilian attems <maks@debian.org>
Architecture: amd64
Source: klibc
Version: 2.0.4-9+deb9u1
Depends: libklibc (= 2.0.4-9+deb9u1)
Breaks: initramfs-tools (<< 0.103)
Description: small utilities built with klibc for early boot
This package contains a collection of programs that are linked
against klibc. These duplicate some of the functionality of a
regular Linux toolset, but are typically much smaller than their
full-function counterparts. They are intended for inclusion in
initramfs images and embedded systems.
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git
Package: php-auth-sasl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 78
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Version: 1.0.6-3
Depends: php-pear, php-common
Description: Abstraction of various SASL mechanism responses
Provides code to generate responses to common SASL mechanisms, including
Digest-MD5, CramMD5, Plain, Anonymous and Login (Pseudo mechanism).
Homepage: http://pear.php.net/package/Auth_SASL/
Package: php7.0-readline
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 59
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-readline
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc6 (>= 2.14), libedit2 (>= 3.1-20130611), libncurses5 (>= 6), libtinfo5 (>= 6)
Description: readline module for PHP
This package provides the readline module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: php7.0-xsl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 79
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: all
Source: php7.0
Version: 7.0.33-0+deb9u12
Depends: php7.0-common, php7.0-xml
Description: XSL module for PHP (dummy)
This package is a transitional dummy package and can be safely
removed.
Homepage: http://www.php.net/
Package: libidn2-0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 174
Maintainer: Debian Libidn team <help-libidn@gnu.org>
Architecture: amd64
Multi-Arch: same
Version: 0.16-1+deb9u1
Depends: libc6 (>= 2.14), libunistring0
Description: Internationalized domain names (IDNA2008) library
Libidn2 implements the revised algorithm for internationalized domain
names called IDNA2008.
.
This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libidn/#libidn2
Package: libgcc-6-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 12766
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Replaces: gccgo-6 (<< 6.3.0-18+deb9u1)
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libgcc1 (>= 1:6.3.0-18+deb9u1), libgomp1 (>= 6.3.0-18+deb9u1), libitm1 (>= 6.3.0-18+deb9u1), libatomic1 (>= 6.3.0-18+deb9u1), libasan3 (>= 6.3.0-18+deb9u1), liblsan0 (>= 6.3.0-18+deb9u1), libtsan0 (>= 6.3.0-18+deb9u1), libubsan0 (>= 6.3.0-18+deb9u1), libcilkrts5 (>= 6.3.0-18+deb9u1), libmpx2 (>= 6.3.0-18+deb9u1), libquadmath0 (>= 6.3.0-18+deb9u1)
Recommends: libc6-dev (>= 2.13-5)
Description: GCC support library (development files)
This package contains the headers and static library files necessary for
building C programs which use libgcc, libgomp, libquadmath, libssp or libitm.
Homepage: http://gcc.gnu.org/
Package: python-configobj
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 162
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: configobj
Version: 5.0.6-2
Depends: python (>= 2.7), python (<< 2.8), python-six
Suggests: python-configobj-doc
Description: simple but powerful config file reader and writer for Python 2
ConfigObj is a simple but powerful config file reader and writer: an
ini file round tripper. Its main feature is that it is very easy to
use, with a straightforward programmer's interface and a simple
syntax for config files. It has lots of other features, though:
.
* Nested sections (subsections), to any level
* List values
* Multiple line values
* String interpolation (substitution)
* Integrated with a powerful validation system
+ including automatic type checking/conversion
+ and allowing default values
+ repeated sections
* All comments in the file are preserved
* The order of keys/sections is preserved
* Full Unicode support
* Powerful unrepr mode for storing/retrieving Python data-types
.
This is the Python 2 version of the package.
Homepage: http://www.voidspace.org.uk/python/configobj.html
Package: libnet-smtp-ssl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 20
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.04-1
Depends: libio-socket-ssl-perl, perl
Recommends: libauthen-sasl-perl
Description: Perl module providing SSL support to Net::SMTP
Net::SMTP::SSL implements the same API as Net::SMTP, but uses IO::Socket::SSL
for its network operations. Due to the nature of Net::SMTP's new method, it is
not overridden to make use of a default port for the SMTPS service. Perhaps
future versions will be smart like that. Port 465 is usually what you want,
and it's not a pain to specify that.
.
This package is deprecated. Net::SMTP (in perl core) has support for SMTP
over SSL, and also for STARTTLS, since version 1.28 (included in Perl 5.22).
Homepage: https://metacpan.org/release/Net-SMTP-SSL
Package: libopenjp2-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 307
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openjpeg2
Version: 2.1.2-1.1+deb9u7
Depends: libc6 (>= 2.14)
Description: JPEG 2000 image compression/decompression library
OpenJPEG is a library for handling the JPEG 2000 image compression format.
JPEG 2000 is a wavelet-based image compression standard and permits progressive
transmission by pixel and resolution accuracy for progressive downloads of an
encoded image. It supports lossless and lossy compression, supports higher
compression than JPEG 1991, and has resilience to errors in the image.
.
This package contains the runtime files for openjpeg 2.x
Homepage: http://www.openjpeg.org
Package: php-mail-mime
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 170
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Version: 1.10.0-2
Depends: php-mbstring, php-pear, php-common
Description: PHP PEAR module for creating MIME messages
Provides classes to deal with creation and manipulation of mime messages. It
allows people to create e-mail messages consisting of:
.
- mime.php: Create mime email, with html, attachments, embedded images
etc.
- mimePart.php: Advanced method of creating mime messages.
- xmail.dtd: An XML DTD to acompany the getXML() method of the decoding
class.
- xmail.xsl: An XSLT stylesheet to transform the output of the getXML()
method back to an email
Homepage: http://pear.php.net/package/Mail_Mime/
Package: libuniversal-moniker-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 47
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.08-7
Depends: perl
Recommends: liblingua-en-inflect-perl (>= 1.88)
Description: Methods to output nicer names for your Perl modules/classes
Class names in Perl often don't sound great when spoken, or look good
when written in prose. For this reason, the module authors tend to
say things like "customer" or "basket" when they are referring to
"My::Site::User::Customer" or "My::Site::Shop::Basket". They thought
it would be nice if their classes knew what they would prefer to call
them.
.
This module will add a "moniker" (and "plural_moniker") method to
"UNIVERSAL", and so to every class or module.
Homepage: https://metacpan.org/release/UNIVERSAL-moniker
Package: libnetfilter-conntrack3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 134
Maintainer: Alexander Wirt <formorer@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnetfilter-conntrack
Version: 1.0.6-2
Depends: libc6 (>= 2.14), libmnl0 (>= 1.0.3-4~), libnfnetlink0
Description: Netfilter netlink-conntrack library
libnetfilter_conntrack is a userspace library providing a programming
interface (API) to the in-kernel connection tracking state table.
Homepage: http://www.netfilter.org/projects/libnetfilter_conntrack/
Package: php-imagick
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 462
Maintainer: Debian PHP PECL Maintainers <pkg-php-pecl@lists.alioth.debian.org>
Architecture: amd64
Version: 3.4.3~rc2-2+deb9u1
Provides: php7.0-imagick
Depends: php-common (>= 1:7.0+33~), phpapi-20151012, libc6 (>= 2.14), libmagickcore-6.q16-3 (>= 8:6.9.6.8), libmagickwand-6.q16-3 (>= 8:6.9.6.8)
Recommends: ghostscript, ttf-dejavu-core
Conffiles:
/etc/php/7.0/mods-available/imagick.ini 5dc8a9511b4fa405099723d80b21b5de
Description: Provides a wrapper to the ImageMagick library
Imagick is a native php extension to create and modify images using the
ImageMagick API.
This extension requires ImageMagick version 6.2.4+ and PHP 5.1.3+.
.
IMPORTANT: Version 2.x API is not compatible with earlier versions.
Homepage: http://pecl.php.net/package/imagick
Package: dovecot-lmtpd
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 730
Maintainer: Dovecot Maintainers <jaldhar-dovecot@debian.org>
Architecture: amd64
Source: dovecot
Version: 1:2.2.27-3+deb9u7
Replaces: dovecot-common (<< 1:2.0.14-2~)
Depends: dovecot-core (= 1:2.2.27-3+deb9u7), libc6 (>= 2.4), ucf (>= 2.0020)
Breaks: dovecot-common (<< 1:2.0.14-2~)
Description: secure POP3/IMAP server - LMTP server
Dovecot is a mail server whose major goals are security and extreme
reliability. It tries very hard to handle all error conditions and verify
that all data is valid, making it nearly impossible to crash. It supports
mbox/Maildir and its own dbox/mdbox formats, and should also be pretty
fast, extensible, and portable.
.
This package contains the Dovecot LMTP server.
Homepage: http://dovecot.org/
Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 220
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.6
Replaces: libpam-modules (<< 1.1.3-8)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Description: Pluggable Authentication Modules for PAM - helper binaries
This package contains helper binaries used by the standard set of PAM
modules in the libpam-modules package.
Homepage: http://www.linux-pam.org/
Package: clamav-freshclam
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 506
Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>
Architecture: amd64
Source: clamav
Version: 0.100.3+dfsg-0+deb9u1
Provides: clamav-data
Depends: clamav-base (>= 0.100.3+dfsg-0+deb9u1), dpkg (>= 1.16.1), logrotate, lsb-base (>= 3.2-13), procps (>= 1:3.3.2), ucf, debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), libc6 (>= 2.15), libclamav7 (>= 0.100.3), libssl1.1 (>= 1.1.0), zlib1g (>= 1:1.2.3.3)
Suggests: apparmor, clamav-docs
Conflicts: clamav-data, libclamav2, libclamav3
Conffiles:
/etc/apparmor.d/usr.bin.freshclam b22a27d9490e19001679bc1638ba9fa9
/etc/init.d/clamav-freshclam 78639f5006295d13a6435377b9ea94e0
/etc/logcheck/ignore.d.server/clamav-freshclam eea142f7981a84fa4381e21165c987c3
/etc/network/if-down.d/clamav-freshclam-ifupdown b3599cad6f7f2fea4ca5c220d72c49e6
/etc/network/if-up.d/clamav-freshclam-ifupdown b3599cad6f7f2fea4ca5c220d72c49e6
/etc/ppp/ip-down.d/clamav-freshclam-ifupdown b3599cad6f7f2fea4ca5c220d72c49e6
/etc/ppp/ip-up.d/clamav-freshclam-ifupdown b3599cad6f7f2fea4ca5c220d72c49e6
Description: anti-virus utility for Unix - virus database update utility
Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
this software is the integration with mail servers (attachment
scanning). The package provides a flexible and scalable
multi-threaded daemon in the clamav-daemon package, a command-line
scanner in the clamav package, and a tool for automatic updating via
the Internet in the clamav-freshclam package. The programs are based
on libclamav, which can be used by other software.
.
This package contains the freshclam program and scripts to automate virus
database updating. It relies on an Internet connection, but can be
run in a variety of ways to compensate for intermittent connections.
Homepage: https://www.clamav.net/
Package: php-php-gettext
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 69
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Source: php-gettext
Version: 1.0.12-0.1
Replaces: php-gettext (<< 1.0.11-3~)
Depends: php-pear, php-mbstring
Conflicts: php-gettext (<< 1.0.11-3~)
Description: read gettext MO files directly, without requiring anything other than PHP
The GNU gettext library is a widely used localization library, but in
order to use it with the PHP language, the system has to support the
desired locale, and library itself must be installed.
.
Since this is not always the case, PHP-gettext has been developed to be
able to read gettext MO files directly, without requiring anything other
than PHP.
.
Currently, it's usable if you develop most of the infrastructure for
choosing language on your own, because it's possible to use both
gettext() and ngettext() calls. In the near future, it should also be
fully compatible drop-in replacement for all of gettext functionality
written in PHP.
Homepage: https://launchpad.net/php-gettext/
Package: locate
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 314
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: findutils
Version: 4.6.0+git+20161106-2
Replaces: findutils (<< 4.2.31-2)
Depends: libc6 (>= 2.14), findutils (>> 4.2.31-1)
Breaks: slocate (<= 3.1-1.1)
Conffiles:
/etc/cron.daily/locate cea1f0872dcb92d9234098c267fa262b
Description: maintain and query an index of a directory tree
updatedb generates an index of files and directories. GNU locate can be used
to quickly query this index.
Homepage: http://savannah.gnu.org/projects/findutils/
Package: python3-apt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 645
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python-apt
Version: 1.4.3
Replaces: python-apt (<< 0.7.98+nmu1)
Provides: python3.5-apt
Depends: python3 (<< 3.6), python3 (>= 3.5~), python3:any (>= 3.3.2-2~), libapt-inst2.0 (>= 1.4~beta3), libapt-pkg5.0 (>= 1.4~beta3), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2), python-apt-common
Recommends: lsb-release, iso-codes
Suggests: python3-apt-dbg, python-apt-doc, apt
Breaks: python-apt (<< 0.7.98+nmu1)
Description: Python 3 interface to libapt-pkg
The apt_pkg Python 3 interface will provide full access to the internal
libapt-pkg structures allowing Python 3 programs to easily perform a
variety of functions, such as:
.
- Access to the APT configuration system
- Access to the APT package information database
- Parsing of Debian package control files, and other files with a
similar structure
.
The included 'aptsources' Python interface provides an abstraction of
the sources.list configuration on the repository and the distro level.
Package: quotatool
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 49
Maintainer: Bas Zoetekouw <bas@debian.org>
Architecture: amd64
Source: quotatool (1:1.4.12-2)
Version: 1:1.4.12-2+b1
Depends: libc6 (>= 2.7)
Recommends: quota
Description: tool to edit disk quotas from the command line
Quotatool is a utility to set filesystem quotas from the commandline.
Most quota-utilities are interactive, requiring manual intervention from the
user. Quotatool on the other hand is not, making it suitable for use in
scripts and other non-interactive situations. This is very useful to edit
disk quotas from scripts.
Homepage: http://quotatool.ekenberg.se/
Package: libip4tc0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Arturo Borrero Gonzalez <arturo@debian.org>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.6.0+snapshot20161117-6
Depends: libc6 (>= 2.14)
Description: netfilter libip4tc library
The user-space iptables (IPv4) C library from the Netfilter xtables framework.
.
iptables IPv4 ruleset ADT and kernel interface.
.
This library has been considered private for years (and still is), in the
sense of changing symbols and backward compatibility not guaranteed.
Homepage: http://www.netfilter.org/
Package: libisc160
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1119
Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u12
Replaces: libbind0
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10), libgeoip1, libxml2 (>= 2.7.4)
Conflicts: libbind0, libbind9-41
Description: ISC Shared Library used by BIND
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the libisc shared library used by BIND's daemons and
clients.
Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1131
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.27-2
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.14), libpcre3
Suggests: libpcre3 (>= 7.7)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
'grep' is a utility to search for text in files; it can be used from the
command line or in scripts. Even if you don't want to use it, other packages
on your system probably will.
.
The GNU family of grep utilities may be the "fastest grep in the west".
GNU grep is based on a fast lazy-state deterministic matcher (about
twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
search for a fixed string that eliminates impossible text from being
considered by the full regexp matcher without necessarily having to
look at every character. The result is typically many times faster
than Unix grep or egrep. (Regular expressions containing backreferencing
will run more slowly, however.)
Homepage: http://www.gnu.org/software/grep/
Package: php7.0-opcache
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 223
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-opcache
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc6 (>= 2.14)
Description: Zend OpCache module for PHP
This package provides the Zend OpCache module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: ifupdown
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 195
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 0.8.19
Replaces: systemd (<< 228-3~)
Depends: libc6 (>= 2.14), init-system-helpers (>= 1.18~), lsb-base, adduser, iproute2
Recommends: isc-dhcp-client | dhcp-client
Suggests: ppp, rdnssd
Breaks: systemd (<< 228-3~)
Conffiles:
/etc/default/networking 35cd4a2713981c9239ce4532c1bfc1c7
/etc/init.d/networking 27013efdfe13470845c70a9e00a61fde
/etc/init/network-interface-container.conf 4daa570594afc50940f140a7731d20d1
/etc/init/network-interface-security.conf feb6b4b52fe24c44ff1bc68addf245d6
/etc/init/network-interface.conf aae12345eba8e946579b06798b1752c1
/etc/init/networking.conf c50811e19bcd596d99b0467b40cfbb8b
/etc/network/if-down.d/upstart 1a0205ddbc1446782a8d4d818e97d8a5
/etc/network/if-up.d/upstart dfbcde4fd4a3a2553930605e03e160ab
Description: high level tools to configure network interfaces
This package provides the tools ifup and ifdown which may be used to
configure (or, respectively, deconfigure) network interfaces based on
interface definitions in the file /etc/network/interfaces.
Package: python-chardet
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 496
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: all
Source: chardet
Version: 2.3.0-2
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~), python-pkg-resources
Description: universal character encoding detector for Python2
Chardet takes a sequence of bytes in an unknown character encoding, and
attempts to determine the encoding.
.
Supported encodings:
* ASCII, UTF-8, UTF-16 (2 variants), UTF-32 (4 variants)
* Big5, GB2312, EUC-TW, HZ-GB-2312, ISO-2022-CN (Traditional and Simplified
Chinese)
* EUC-JP, SHIFT_JIS, ISO-2022-JP (Japanese)
* EUC-KR, ISO-2022-KR (Korean)
* KOI8-R, MacCyrillic, IBM855, IBM866, ISO-8859-5, windows-1251 (Cyrillic)
* ISO-8859-2, windows-1250 (Hungarian)
* ISO-8859-5, windows-1251 (Bulgarian)
* windows-1252 (English)
* ISO-8859-7, windows-1253 (Greek)
* ISO-8859-8, windows-1255 (Visual and Logical Hebrew)
* TIS-620 (Thai)
.
This library is a port of the auto-detection code in Mozilla.
Homepage: https://github.com/chardet/chardet
Package: libstdc++-6-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 14894
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Provides: libstdc++-dev
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libgcc-6-dev (= 6.3.0-18+deb9u1), libstdc++6 (>= 6.3.0-18+deb9u1), libc6-dev (>= 2.13-5)
Suggests: libstdc++-6-doc
Conflicts: libg++2.8-dev, libg++27-dev, libg++272-dev (<< 2.7.2.8-1), libstdc++2.10-dev (<< 1:2.95.3-2), libstdc++2.8-dev, libstdc++2.9-dev, libstdc++2.9-glibc2.1-dev, libstdc++3.0-dev
Description: GNU Standard C++ Library v3 (development files)
This package contains the headers and static library files necessary for
building C++ programs which use libstdc++.
.
libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
was included up to g++-2.95. The first version of libstdc++-v3 appeared
in g++-3.0.
Homepage: http://gcc.gnu.org/
Package: clamav-base
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 156
Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>
Architecture: all
Source: clamav
Version: 0.100.3+dfsg-0+deb9u1
Depends: adduser, logrotate, ucf, debconf (>= 0.5) | debconf-2.0
Recommends: clamav
Description: anti-virus utility for Unix - base package
Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
this software is the integration with mail servers (attachment
scanning). The package provides a flexible and scalable
multi-threaded daemon in the clamav-daemon package, a command-line
scanner in the clamav package, and a tool for automatic updating via
the Internet in the clamav-freshclam package. The programs are based
on libclamav, which can be used by other software.
.
This package mainly manages the clamav system account. It is not really
useful without the clamav or clamav-daemon package.
Homepage: https://www.clamav.net/
Package: libmagickcore-6.q16-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6493
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:6.9.7.4+dfsg-11+deb9u14
Depends: libbz2-1.0, libc6 (>= 2.14), libfftw3-double3 (>= 3.3.5), libfontconfig1 (>= 2.11), libfreetype6 (>= 2.2.1), libgcc1 (>= 1:3.3.1), libgomp1 (>= 4.9), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.2+git20110628), liblqr-1-0 (>= 0.4.0), libltdl7 (>= 2.4.6), liblzma5 (>= 5.1.1alpha+20120614), libopenjp2-7 (>= 2.0.0), libpng16-16 (>= 1.6.2-1), libtiff5 (>= 4.0.3), libx11-6, libxext6, libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4), imagemagick-6-common (>= 8:6.9.6.2+dfsg-3)
Pre-Depends: dpkg (>= 1.17.6)
Recommends: ghostscript, gsfonts
Suggests: libmagickcore-6.q16-3-extra
Description: low-level image manipulation library -- quantum depth Q16
The MagickCore API is a low-level interface between the C programming language
and the ImageMagick image processing libraries and is recommended for
wizard-level programmers only. Unlike the MagickWand C API which uses only a
few opaque types and accessors, with MagickCore you almost exclusively access
the structure members directly.
.
This package contains the C libraries needed to run executables that make
use of MagickCore.
.
This version of libmagickcore is compiled for a channel
depth of 16 bits (Q16).
Homepage: http://www.imagemagick.org/
Package: libjpeg62-turbo
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 478
Maintainer: Ondřej Surý <ondrej@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libjpeg-turbo
Version: 1:1.5.1-2+deb9u2
Replaces: libjpeg62
Provides: libjpeg62 (= 1:1.5.1-2+deb9u2)
Depends: libc6 (>= 2.14)
Conflicts: libjpeg62
Description: libjpeg-turbo JPEG runtime library
The libjpeg-turbo JPEG library is a library for handling JPEG files.
.
libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX,
SSE2, NEON) to accelerate baseline JPEG compression and decompression
on x86, x86-64, and ARM systems. The libjpeg-turbo JPEG library is
an API/ABI compatible with the IJG JPEG library.
.
This package contains the shared runtime library.
Homepage: http://www.libjpeg-turbo.org/
Package: composer
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1718
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Version: 1.2.2-1+deb9u1
Depends: php-symfony-console (>= 2.5), php-symfony-filesystem (>= 2.5), php-symfony-finder (>= 2.4), php-symfony-process (>= 2.4), php-cli, php-common, php-json-schema, php-composer-ca-bundle (>= 1.0), php-composer-ca-bundle (<< 2~~), php-composer-semver (>= 1.0), php-composer-semver (<< 2~~), php-composer-spdx-licenses (>= 1.0), php-composer-spdx-licenses (<< 2~~), jsonlint (>= 1.4), jsonlint (<< 2~~), php-cli-prompt (>= 1.0), php-cli-prompt (<< 2~~), php-psr-log (>= 1.0), php-psr-log (<< 2~~)
Recommends: git
Suggests: fossil, mercurial, subversion, php-zip
Description: dependency manager for PHP
Composer helps you declare, manage and install dependencies of PHP projects,
ensuring you have the right stack everywhere.
.
It behaves like Bundler (Ruby), npm (Node), etc.
Homepage: https://getcomposer.org/
Package: mariadb-server-core-10.1
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 25988
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb-10.1
Version: 10.1.26-0+deb9u1
Replaces: mariadb-client-10.1 (<< 10.1.26-0+deb9u1), mariadb-server-10.1 (<< 10.1.26-0+deb9u1), mariadb-server-core-10.0, mariadb-server-core-5.5, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, virtual-mysql-server-core
Provides: virtual-mysql-server-core
Depends: mariadb-common (>= 10.1.26-0+deb9u1), libaio1 (>= 0.3.93), libc6 (>= 2.17), libjemalloc1 (>= 2.1.1), libpcre3, libstdc++6 (>= 5.2), libsystemd0, zlib1g (>= 1:1.2.0)
Breaks: mariadb-client-10.1 (<< 10.1.26-0+deb9u1), mariadb-server-10.1 (<< 10.1.26-0+deb9u1), mariadb-server-core-10.0, mariadb-server-core-5.5, mysql-client-5.5, mysql-client-5.6, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7
Conflicts: mariadb-galera-server-5.5, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, virtual-mysql-server-core
Description: MariaDB database core server files
MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
server. SQL (Structured Query Language) is the most popular database query
language in the world. The main goals of MariaDB are speed, robustness and
ease of use.
.
This package includes the core server files, as used by Akonadi.
Homepage: https://mariadb.org/
Package: php-composer-ca-bundle
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 52
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Version: 1.0.2-1
Replaces: composer (<< 1.1)
Depends: ca-certificates, php-common
Suggests: php-symfony-process
Breaks: composer (<< 1.1)
Description: utility library to find a path to the system CA bundle
The ca-bundle library has been split away from Composer.
.
Composer helps you declare, manage and install dependencies of PHP projects,
ensuring you have the right stack everywhere.
Homepage: https://github.com/composer/ca-bundle
Package: libclass-data-inheritable-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 55
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.08-2
Depends: perl
Description: Perl module to create accessors to class data
Class::Data::Inheritable is for creating accessors/mutators to class
data. That is, if you want to store something about your class as a
whole (instead of about a single object). This data is then inherited
by your subclasses and can be overridden.
.
For example:
.
Pere::Ubu->mk_classdata('Suitcase');
.
will generate the method Suitcase() in the class Pere::Ubu.
.
This new method can be used to get and set a piece of class data.
.
Pere::Ubu->Suitcase('Red');
$suitcase = Pere::Ubu->Suitcase;
Homepage: https://metacpan.org/release/Class-Data-Inheritable/
Package: libarchive-zip-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 276
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.59-1+deb9u1
Depends: perl
Description: Perl module for manipulation of ZIP archives
The Archive::Zip module allows a Perl program to create, manipulate,
read, and write Zip archive files.
.
Zip archives can be created, or you can read from existing zip files.
Once created, they can be written to files, streams, or strings.
.
Members can be added, removed, extracted, replaced, rearranged, and
enumerated. They can also be renamed or have their dates, comments,
or other attributes queried or modified. Their data can be
compressed or uncompressed as needed. Members can be created from
members in existing Zip files, or from existing directories, files,
or strings.
Homepage: https://metacpan.org/release/Archive-Zip
Package: dh-autoreconf
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 43
Maintainer: Julian Andres Klode <jak@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 14
Depends: perl, debhelper, autoconf, automake, autopoint, libtool (>= 2.4.2)
Enhances: cdbs, debhelper
Description: debhelper add-on to call autoreconf and clean up after the build
dh-autoreconf provides a debhelper sequence addon named 'autoreconf' and two
commands, dh_autoreconf and dh_autoreconf_clean.
.
The dh_autoreconf command creates a list of the files and their checksums,
calls autoreconf and then creates a second list for the new files.
.
The dh_autoreconf_clean command compares these two lists and removes all
files which have been added or changed (files may be excluded if needed).
.
For CDBS users, a rule is provided to call the dh-autoreconf programs at
the right time.
Package: php7.0-mbstring
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1474
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-mbstring
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc6 (>= 2.14)
Description: MBSTRING module for PHP
This package provides the MBSTRING module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libmspack0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 100
Maintainer: Marc Dequènes (Duck) <Duck@DuckCorp.org>
Architecture: amd64
Multi-Arch: same
Source: libmspack
Version: 0.5-1+deb9u4
Depends: libc6 (>= 2.14)
Description: library for Microsoft compression formats (shared library)
The purpose of libmspack is to provide both compression and decompression of
some loosely related file formats used by Microsoft. The intention is to
support all of the following formats: COMPRESS.EXE [SZDD],
Microsoft Help (.HLP), COMPRESS.EXE [KWAJ], Microsoft Cabinet (.CAB),
HTML Help (.CHM), Microsoft eBook (.LIT), Windows Imaging Format (.WIM),
Exchange Offline Address Book (.LZX).
Homepage: http://www.cabextract.org.uk/libmspack/
Package: libapache2-mod-php
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 16
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: all
Source: php-defaults (49)
Version: 1:7.0+49
Depends: libapache2-mod-php7.0
Description: server-side, HTML-embedded scripting language (Apache 2 module) (default)
This package provides the PHP module for the Apache 2 webserver.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
.
This package is a dependency package, which depends on Debian's default
PHP version (currently 7.0).
Package: apache2
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 579
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Version: 2.4.25-3+deb9u13
Replaces: apache2.2-bin, apache2.2-common
Provides: httpd, httpd-cgi
Depends: init-system-helpers (>= 1.18~), lsb-base, procps, perl, mime-support, apache2-bin (= 2.4.25-3+deb9u13), apache2-utils (= 2.4.25-3+deb9u13), apache2-data (= 2.4.25-3+deb9u13), perl:any
Pre-Depends: dpkg (>= 1.17.14)
Recommends: ssl-cert
Suggests: www-browser, apache2-doc, apache2-suexec-pristine | apache2-suexec-custom
Conflicts: apache2.2-bin, apache2.2-common
Conffiles:
/etc/apache2/apache2.conf 20589b50379161ebc8cb35f761af2646
/etc/apache2/conf-available/charset.conf 46ea15bcd82c11ea0973aa8842b1dc56
/etc/apache2/conf-available/localized-error-pages.conf cfd0ae5e448102514efe8b97181d19c9
/etc/apache2/conf-available/other-vhosts-access-log.conf 60d5d57995317aedb02bd2a20b366717
/etc/apache2/conf-available/security.conf f2e736bb593323988d1ebdabee67729f
/etc/apache2/conf-available/serve-cgi-bin.conf 21abde7dadc1020140b9ab796d06fd29
/etc/apache2/envvars e4431a53c868ae0dfcde68564f3ce6a7
/etc/apache2/magic a6d370833a02f53db6a0a30800704994
/etc/apache2/mods-available/access_compat.load f7f77b3eb4005749b583ff14b49f8bf1
/etc/apache2/mods-available/actions.conf 8736884dbc596bcfdbb392409c96fde5
/etc/apache2/mods-available/actions.load 95dcfd2efdd41666de5f31dd72e01e41
/etc/apache2/mods-available/alias.conf c6e9f26152898c38e58211c8b362d5c3
/etc/apache2/mods-available/alias.load 7742296502ce1d2f970cc87322d8ffba
/etc/apache2/mods-available/allowmethods.load b377b96eb4dddd88f9428d9cc2fd87ea
/etc/apache2/mods-available/asis.load d1003c9fa12b4d3ed35ea3827a689492
/etc/apache2/mods-available/auth_basic.load a92c34a3ce5e67e2ecbd272155ebe072
/etc/apache2/mods-available/auth_digest.load f29d047cd59013e2fa6724d677c7970b
/etc/apache2/mods-available/auth_form.load 731420a769dd8ad537d68bfdbdd6a506
/etc/apache2/mods-available/authn_anon.load 03cbe85c698911a3d3235b4855726481
/etc/apache2/mods-available/authn_core.load c6420ed74b0095f8408aba3e11db4907
/etc/apache2/mods-available/authn_dbd.load 86e21a672a4f245715a788f9873174ed
/etc/apache2/mods-available/authn_dbm.load 4e37546871dbcba8550a0d781f6fbfa8
/etc/apache2/mods-available/authn_file.load ecdeeab8cfec4a9dd0c065a4d6948c31
/etc/apache2/mods-available/authn_socache.load 260e21e1eb5caa7bcabe8a2fae11445f
/etc/apache2/mods-available/authnz_fcgi.load b12a39427b0b3a8d2ffb03cfc029da18
/etc/apache2/mods-available/authnz_ldap.load d65845f053d08b82da239c73c9094c35
/etc/apache2/mods-available/authz_core.load 90ad8f57655bcd98b7b07864736ab954
/etc/apache2/mods-available/authz_dbd.load c746b8c3bf3fca950ca41fcd553328b4
/etc/apache2/mods-available/authz_dbm.load 8cd42e62d8ca0701f9aad080ec968493
/etc/apache2/mods-available/authz_groupfile.load 97a3e14926ce7bf5f2d2a7b93ece648d
/etc/apache2/mods-available/authz_host.load f529587409471e3feb62256bccaf538a
/etc/apache2/mods-available/authz_owner.load 9ed1ea15654bb594453438154b642539
/etc/apache2/mods-available/authz_user.load bcf988f105564ec1e14b78df56a01cd8
/etc/apache2/mods-available/autoindex.conf bfba7d77669e02b869b92e98215d58fc
/etc/apache2/mods-available/autoindex.load b9f9d364f1b4c96c45b6db353180aa15
/etc/apache2/mods-available/buffer.load ae1e21b4fd2c2e8236ec641cae9814bd
/etc/apache2/mods-available/cache.load ea99aba14e9aa25c27653b9958239a6e
/etc/apache2/mods-available/cache_disk.conf b716cf836c9f00dae0366a39f511b76d
/etc/apache2/mods-available/cache_disk.load 56ebd9819aa70a7ff8ac04e4922049f2
/etc/apache2/mods-available/cache_socache.load 4b548216cee2e910e9059e426f81e60c
/etc/apache2/mods-available/cern_meta.load 2c2d9adcb273f934304e7dfb5775f7b9
/etc/apache2/mods-available/cgi.load 32a1c48f0e29feb415c9460378728d82
/etc/apache2/mods-available/cgid.conf e8a2836392051bde889cf9c137058273
/etc/apache2/mods-available/cgid.load c3ee2eac02c248b5a39fb1a7afee4cb9
/etc/apache2/mods-available/charset_lite.load 1585fcd1b631c2e9b166e170cb162c54
/etc/apache2/mods-available/data.load b6cc5b9e815f551335596cd1e25ffc34
/etc/apache2/mods-available/dav.load ed469867552a1145b8c3ffa5780ff83e
/etc/apache2/mods-available/dav_fs.conf 162db96239f13b5416f369b6306d9db6
/etc/apache2/mods-available/dav_fs.load 17f662fd023dbaaab9d89f9a11ae58c1
/etc/apache2/mods-available/dav_lock.load faad09687e64ebb9670aa0b8095d6642
/etc/apache2/mods-available/dbd.load f03fe275174a5ed97b0f5f5726ccea60
/etc/apache2/mods-available/deflate.conf 6649a32153b9afdc53f6898b5a10a2d6
/etc/apache2/mods-available/deflate.load 6a7a23153796456ee919abdf728fd972
/etc/apache2/mods-available/dialup.load dbc3535a9e5dfd799cf16b5c0d58f137
/etc/apache2/mods-available/dir.conf fe4bc5fa3b3cc7a241fe57f8fabc55a1
/etc/apache2/mods-available/dir.load 397aadae1b8b18e3a7a233cf7c297f99
/etc/apache2/mods-available/dump_io.load 8231c51ef692e0766625ece087484fe4
/etc/apache2/mods-available/echo.load 226a145f19c43d9f921c35eacfd61cb2
/etc/apache2/mods-available/env.load 3e8963a7df7c047be50a552d80a4f853
/etc/apache2/mods-available/expires.load dac64edc06fe538c2edd7b3f1f3b03f1
/etc/apache2/mods-available/ext_filter.load d3c4acfca1322274a9a8504e8cef27e9
/etc/apache2/mods-available/file_cache.load f097659127628ec6f9c6a558d0baf566
/etc/apache2/mods-available/filter.load 8df0170e37a8925238860657d6c60fe5
/etc/apache2/mods-available/headers.load ba7d09162b65d09397bd58be33138e4d
/etc/apache2/mods-available/heartbeat.load b78970d35346bfe5eb5817d228cb209c
/etc/apache2/mods-available/heartmonitor.load b4da13d1c05a7dd1bdeb272300c1fc83
/etc/apache2/mods-available/http2.load e18e0c7e38196e7d7580ecedaaa72e3b
/etc/apache2/mods-available/ident.load 51ba623a8a2bd71c512f847d02e0934f
/etc/apache2/mods-available/imagemap.load 51d5109d8bc2bafc17af03beace4d8a4
/etc/apache2/mods-available/include.load 9cf2fa9ceb6571b5fab4603daad44c83
/etc/apache2/mods-available/info.conf 4a4aa21e0bb474d420c9a3e1c3320677
/etc/apache2/mods-available/info.load c1faffe40b8bed9f2b817b9dc0503bb6
/etc/apache2/mods-available/lbmethod_bybusyness.load 094b7c1d424cc4a1dee6f77d301e1888
/etc/apache2/mods-available/lbmethod_byrequests.load f33d55ab5bbf907340426e31f99f6701
/etc/apache2/mods-available/lbmethod_bytraffic.load e656d80b48c020b7d77ece23368e04f1
/etc/apache2/mods-available/lbmethod_heartbeat.load 944703ff299a25cf068de7f6a2374465
/etc/apache2/mods-available/ldap.conf 344968a263507c1991a160427e51ed9c
/etc/apache2/mods-available/ldap.load 735ac5f246738e11a53f6c515b8dfc48
/etc/apache2/mods-available/log_debug.load d062328e5987fa686615394768339abe
/etc/apache2/mods-available/log_forensic.load 7177e2427eb7c78f1ab10c034a809793
/etc/apache2/mods-available/lua.load 5e445ce688a49e0a1fcfcaa414fe21f9
/etc/apache2/mods-available/macro.load 40e0509b4b2d307cdfe4de75fa89dc91
/etc/apache2/mods-available/mime.conf 7369c2fd5edf2192edbd6d865b632ae5
/etc/apache2/mods-available/mime.load 9c858dc2ad2825dc3f862ecba90cf6ec
/etc/apache2/mods-available/mime_magic.conf ebeaf79afde03c805e795bb51eec155f
/etc/apache2/mods-available/mime_magic.load ab5c69aa0c91f11157e9bfc4972f8cce
/etc/apache2/mods-available/mpm_event.conf d868a76835101a66be2863362ef9f81a
/etc/apache2/mods-available/mpm_event.load 08816d280ebbd94b8c5961fc6f7168b5
/etc/apache2/mods-available/mpm_prefork.conf 26e539a16e51c4feddd2eedc568692e6
/etc/apache2/mods-available/mpm_prefork.load 9bcdffe5055526e0929ecd49ee311c9e
/etc/apache2/mods-available/mpm_worker.conf 2673a5a3f030bfb704bee034ce3a183c
/etc/apache2/mods-available/mpm_worker.load 0c6640977f0f046a55fdaf76eb54adef
/etc/apache2/mods-available/negotiation.conf 443398efdd41085bc1a70047f6e61c95
/etc/apache2/mods-available/negotiation.load fd7bf44d833446a35f0199d7cbcc9793
/etc/apache2/mods-available/proxy.conf b516d96935974214588d525edd7aed6d
/etc/apache2/mods-available/proxy.load 3d3719c88d01152e817f74fc2fd6ce9e
/etc/apache2/mods-available/proxy_ajp.load e058e03c1d4f9e4d8e2c439ed75cc501
/etc/apache2/mods-available/proxy_balancer.conf 5e9113f9556e17c0fec6c81232651791
/etc/apache2/mods-available/proxy_balancer.load 9c6e6ff2195159c8af97f7673e8d2ada
/etc/apache2/mods-available/proxy_connect.load 6bc4b5de977f70a0b6ae98ab04383c0c
/etc/apache2/mods-available/proxy_express.load f2ad6e7e80d2750cdca5986657e7835e
/etc/apache2/mods-available/proxy_fcgi.load 09cbda44eecbf1cbab48b30045217e3c
/etc/apache2/mods-available/proxy_fdpass.load 9e5584db5f748a2fb71b582a255a976e
/etc/apache2/mods-available/proxy_ftp.conf dd9beba82c2838bcfd51a05dfb540929
/etc/apache2/mods-available/proxy_ftp.load c05db1b229a7957f0032c0d79ed7e3c9
/etc/apache2/mods-available/proxy_hcheck.load 92898c1ef9124193fa5d9e13408e0372
/etc/apache2/mods-available/proxy_html.conf 5b60af3b1796f2db4b5f7a8a7941f1bc
/etc/apache2/mods-available/proxy_html.load dac7646a0a7242de76f788b4da14390b
/etc/apache2/mods-available/proxy_http.load 161b514c355c6daa95f11371fb9c184c
/etc/apache2/mods-available/proxy_http2.load 8a2cdbe25537eb8cb9007e351274f852
/etc/apache2/mods-available/proxy_scgi.load cb11d685e60db26bbdad456263bf63b7
/etc/apache2/mods-available/proxy_wstunnel.load d2e5c21b886333f1662fe74591260d5d
/etc/apache2/mods-available/ratelimit.load fb40aa030d5458dd99a0c9d1141bcde4
/etc/apache2/mods-available/reflector.load 306c71fae73733506db9099d106ba642
/etc/apache2/mods-available/remoteip.load 81a6511c79ab338aef51a6c185152231
/etc/apache2/mods-available/reqtimeout.conf 40b45155afb3d14263d12e6fc4a98513
/etc/apache2/mods-available/reqtimeout.load 7fd814775dc3f3c9e6753ef874978f96
/etc/apache2/mods-available/request.load 36c1b324cd545e3e29b50b5e2a8357e8
/etc/apache2/mods-available/rewrite.load 55e18fb7df64c8f390904b972637c17d
/etc/apache2/mods-available/sed.load 8ba3c7ff4243e6a45b6e3c372fc0de1b
/etc/apache2/mods-available/session.load b552f1e184865c597ae397876fb3a0a6
/etc/apache2/mods-available/session_cookie.load 89aff7a7f8b4347965d4cf6ea3c5beb9
/etc/apache2/mods-available/session_crypto.load 066002be7d8c6c381553dbded41db1b6
/etc/apache2/mods-available/session_dbd.load cf86e56f8ee26f5dccc39c2f690d7f79
/etc/apache2/mods-available/setenvif.conf 533f5f92761c2c24d6820f1d7d1c45ad
/etc/apache2/mods-available/setenvif.load 6f670fad5b6f6b14fa72c9cd3058469b
/etc/apache2/mods-available/slotmem_plain.load fd33fcd86c77d4d5044ad904e7f38360
/etc/apache2/mods-available/slotmem_shm.load 127df94eaf6987ad67b964f01eec3251
/etc/apache2/mods-available/socache_dbm.load 9f11810517a6bf2eba31b336ebbfad70
/etc/apache2/mods-available/socache_memcache.load c0101bc50501b12e7c8c74014560404b
/etc/apache2/mods-available/socache_shmcb.load 9efb84889b8e1683ce104033bf30973d
/etc/apache2/mods-available/speling.load 095570b0cb18ebdfc357a2241c6932ea
/etc/apache2/mods-available/ssl.conf 6c30f44f4e2ad6bc51c917294aa8e34b
/etc/apache2/mods-available/ssl.load 838b292226d2da6ceb3f1c793696ca12
/etc/apache2/mods-available/status.conf 5d3689f109baf304af4f145249ca6326
/etc/apache2/mods-available/status.load 00976ea5115f286bbc21357581d0b65e
/etc/apache2/mods-available/substitute.load 50e63dc17612e22484a88f537e8aec8e
/etc/apache2/mods-available/suexec.load 335169c85f4afc14524846789d46af06
/etc/apache2/mods-available/unique_id.load 6c13959015fb35276572070b44e63380
/etc/apache2/mods-available/userdir.conf 3a3142e84136336db8b940553a076983
/etc/apache2/mods-available/userdir.load c034025405561ea48fbcb67fd1998f4d
/etc/apache2/mods-available/usertrack.load 8400042dd4374fad5eedf33ffb3c68f0
/etc/apache2/mods-available/vhost_alias.load fdd42d34966c329cdee2435dfe72ee24
/etc/apache2/mods-available/xml2enc.load 1f7ab653ed3601bd265871cdf252a224
/etc/apache2/ports.conf a961f23471d985c2b819b652b7f64321
/etc/apache2/sites-available/000-default.conf f3066f67070ab9b1ad9bab81ca05330a
/etc/apache2/sites-available/default-ssl.conf 801f4c746a88b4228596cb260a4220c4
/etc/cron.daily/apache2 c788ffaa4c682c91e6a1cd7f53840d62
/etc/default/apache-htcacheclean ae8721a0bc5b4e2ef7a5258b1e9db5c5
/etc/init.d/apache-htcacheclean 29fe315052a1c5fbe9dc9f29485ed906
/etc/init.d/apache2 9d22fb30358e61a6f190a0d09c5120bf
/etc/logrotate.d/apache2 7322a4f050c1e2454249695236a3472c
Description: Apache HTTP Server
The Apache HTTP Server Project's goal is to build a secure, efficient and
extensible HTTP server as standards-compliant open source software. The
result has long been the number one web server on the Internet.
.
Installing this package results in a full installation, including the
configuration files, init scripts and support scripts.
Homepage: http://httpd.apache.org/
Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 589
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: psmisc (22.21-2.1)
Version: 22.21-2.1+b2
Replaces: procps (<< 1:1.2)
Depends: libc6 (>= 2.14), libselinux1 (>= 1.32), libtinfo5 (>= 6)
Description: utilities that use the proc file system
This package contains miscellaneous utilities that use the proc FS:
.
- fuser: identifies processes that are using files or sockets.
- killall: kills processes by name (e.g. "killall -HUP named").
- peekfd: shows the data traveling over a file descriptor.
- pstree: shows currently running processes as a tree.
- prtstat: print the contents of /proc/<pid>/stat
Homepage: http://psmisc.sf.net/
Package: libtidy5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 789
Maintainer: Jason Thomas <jason@debian.org>
Architecture: amd64
Source: tidy-html5
Version: 1:5.2.0-2
Depends: libc6 (>= 2.14)
Description: HTML/XML syntax checker and reformatter - library
This is a library package, used by programs which have a dependency on
libtidy5. If you want to run Tidy on the command line, please install the
'tidy' package. If you want to build a program from source which uses
libtidy5, please install the 'libtidy-dev' package.
Homepage: http://www.html-tidy.org/
Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 229
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.5.43
Replaces: base
Depends: libc6 (>= 2.8), libdebconfclient0 (>= 0.145)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
These are the canonical master copies of the user database files
(/etc/passwd and /etc/group), containing the Debian-allocated user and
group IDs. The update-passwd tool is provided to keep the system databases
synchronized with these master files.
Package: libisc-export160
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 604
Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Architecture: amd64
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u12
Depends: libc6 (>= 2.14)
Description: Exported ISC Shared Library
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the exported libisc shared library.
Package: libnghttp2-14
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 205
Maintainer: Dave Beckett <dajobe@debian.org>
Architecture: amd64
Multi-Arch: same
Source: nghttp2
Version: 1.18.1-1+deb9u2
Depends: libc6 (>= 2.14)
Description: library implementing HTTP/2 protocol (shared library)
This is an implementation of the Hypertext Transfer Protocol version
2 in C. The framing layer of HTTP/2 is implemented as a reusable C
library.
.
This package installs a shared library.
Homepage: https://nghttp2.org/
Package: libjs-underscore
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 253
Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: underscore
Version: 1.8.3~dfsg-1+deb9u1
Recommends: javascript-common, libjs-jquery
Description: JavaScript's functional programming helper library
Underscore is a utility-belt library for JavaScript that provides a lot
of the functional programming support that you would expect in
Prototype.js (or Ruby), but without extending any of the built-in
JavaScript objects. It's the tie to go along with jQuery's tux.
.
Underscore provides 60-odd functions that support both the usual
functional suspects: map, select, invoke - as well as more specialized
helpers: function binding, javascript templating, deep equality
testing, and so on. It delegates to built-in functions, if present, so
modern browsers will use the native implementations of forEach, map,
reduce, filter, every, some and indexOf.
Homepage: http://underscorejs.org/
Package: dovecot-mysql
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 700
Maintainer: Dovecot Maintainers <jaldhar-dovecot@debian.org>
Architecture: amd64
Source: dovecot
Version: 1:2.2.27-3+deb9u7
Depends: libc6 (>= 2.4), libmariadbclient18 (>= 10.1.47-0+deb9u1), zlib1g (>= 1:1.1.4), dovecot-core (= 1:2.2.27-3+deb9u7)
Description: secure POP3/IMAP server - MySQL support
Dovecot is a mail server whose major goals are security and extreme
reliability. It tries very hard to handle all error conditions and verify
that all data is valid, making it nearly impossible to crash. It supports
mbox/Maildir and its own dbox/mdbox formats, and should also be pretty
fast, extensible, and portable.
.
This package provides MySQL support for Dovecot.
Homepage: http://dovecot.org/
Package: libapache2-mod-fcgid
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 202
Maintainer: Felix Geyer <fgeyer@debian.org>
Architecture: amd64
Source: libapache2-mod-fcgid (1:2.3.9-1)
Version: 1:2.3.9-1+b1
Depends: libc6 (>= 2.14), apache2-api-20120211
Conffiles:
/etc/apache2/mods-available/fcgid.conf 7632cb86b2fe5da436fc039ab2c38f48
/etc/apache2/mods-available/fcgid.load fbb7cd1c5adfa0960f86dcb4469aff97
Description: FastCGI interface module for Apache 2
This package contains mod_fcgid, a high-performance alternative to mod_cgi
or mod_cgid. It starts a sufficient number of instances of the CGI program
to handle concurrent requests. These programs remain running to handle
further incoming requests.
.
It is a binary-compatible alternative to Apache module mod_fastcgi.
Homepage: http://httpd.apache.org/mod_fcgid/
Package: ienglish-common
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 58
Maintainer: Robert Luberda <robert@debian.org>
Architecture: all
Source: ispell
Version: 3.4.00-5
Depends: ispell (>= 3.3.02)
Recommends: iamerican | iamerican-small | iamerican-large | iamerican-huge | iamerican-insane | ibritish | ibritish-small | ibritish-large | ibritish-huge | ibritish-insane
Description: Common files for British and American ispell dictionaries
This package provides common files and dependencies for all American and
British ispell dictionary packages. The package is useless if none of the
dictionaries is also installed.
Homepage: http://www.lasr.cs.ucla.edu/geoff/ispell.html
Package: e2fslibs
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 450
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.43.4-2+deb9u2
Replaces: e2fsprogs (<< 1.34-1)
Provides: libe2p2, libext2fs2
Depends: libc6 (>= 2.17)
Description: ext2/ext3/ext4 file system libraries
The ext2, ext3 and ext4 file systems are successors of the original ext
("extended") file system. They are the main file system types used for
hard disks on Debian and other Linux systems.
.
This package provides the ext2fs and e2p libraries, for userspace software
that directly accesses extended file systems. Programs that use libext2fs
include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net
Package: liblz4-1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 92
Maintainer: Nobuhiro Iwamatsu <iwamatsu@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lz4
Version: 0.0~r131-2+deb9u1
Depends: libc6 (>= 2.14)
Description: Fast LZ compression algorithm library - runtime
LZ4 is a very fast lossless compression algorithm, providing compression speed
at 400 MB/s per core, scalable with multi-cores CPU. It also features an
extremely fast decoder, with speed in multiple GB/s per core, typically
reaching RAM speed limits on multi-core systems.
.
This package includes the shared library.
Homepage: https://github.com/Cyan4973/lz4
Package: grub-pc-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2909
Maintainer: GRUB Maintainers <pkg-grub-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.02~beta3-5+deb9u2
Replaces: grub-common (<= 1.97~beta2-1), grub-pc (<< 1.99-1), grub2 (<< 2.02~beta3-5+deb9u2)
Depends: libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.36), grub-common (= 2.02~beta3-5+deb9u2)
Suggests: desktop-base (>= 4.0.6)
Description: GRand Unified Bootloader, version 2 (PC/BIOS binaries)
GRUB is a portable, powerful bootloader. This version of GRUB is based on a
cleaner design than its predecessors, and provides the following new features:
.
- Scripting in grub.cfg using BASH-like syntax.
- Support for modern partition maps such as GPT.
- Modular generation of grub.cfg via update-grub. Packages providing GRUB
add-ons can plug in their own script rules and trigger updates by invoking
update-grub.
- VESA-based graphical mode with background image support and complete 24-bit
color set.
- Support for extended charsets. Users can write UTF-8 text to their menu
entries.
.
This package contains a version of GRUB that has been built for use with
traditional PC/BIOS architecture. It will not automatically install GRUB
as the active boot loader, nor will it automatically update grub.cfg on
upgrade, so most people should install grub-pc instead.
Homepage: http://www.gnu.org/software/grub/
Package: python-acme
Status: install ok installed
Priority: extra
Section: python
Installed-Size: 320
Maintainer: Debian Let's Encrypt <letsencrypt-devel@lists.alioth.debian.org>
Architecture: all
Version: 0.10.2-1
Depends: ca-certificates, python-openssl (>= 0.15), python-cryptography (>= 0.8), python-mock, python-requests, python-rfc3339, python-setuptools (>= 11.3~), python-six, python-tz, python:any (<< 2.8), python:any (>= 2.7.5-5~)
Recommends: python-dnspython
Suggests: python-acme-doc
Breaks: python-certbot (<< 0.10.2), python-letsencrypt (<< 0.10.2)
Description: ACME protocol library for Python 2
This is a library used by the Let's Encrypt client for the ACME
(Automated Certificate Management Environment). The ACME protocol is
designed as part of the Let's Encrypt project, to make it possible to
setup an HTTPS server and have it automatically obtain a
browser-trusted certificate, without any human intervention. This
library implements the protocol used for proving the control of a
domain. This library is Python 2.
Homepage: https://letsencrypt.org/
Package: libxext6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 124
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxext (2:1.3.3-1)
Version: 2:1.3.3-1+b2
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X11 miscellaneous extension library
libXext provides an X Window System client interface to several extensions to
the X protocol.
.
The supported protocol extensions are:
- DOUBLE-BUFFER (DBE), the Double Buffer extension;
- DPMS, the VESA Display Power Management System extension;
- Extended-Visual-Information (EVI), an extension for gathering extra
information about the X server's visuals;
- LBX, the Low Bandwidth X extension;
- MIT-SHM, the MIT X client/server shared memory extension;
- MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT;
- Multi-Buffering, the multi-buffering and stereo display extension;
- SECURITY, the X security extension;
- SHAPE, the non-rectangular shaped window extension;
- SYNC, the X synchronization extension;
- TOG-CUP, the Open Group's Colormap Utilization extension;
- XC-APPGROUP, the X Consortium's Application Group extension;
- XC-MISC, the X Consortium's resource ID querying extension;
- XTEST, the X test extension (this is one of two client-side
implementations; the other is in the libXtst library, provided by the
libxtst6 package);
.
libXext also provides a small set of utility functions to aid authors of
client APIs for X protocol extensions.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXext
Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 213
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.8.1.1
Replaces: manpages-pl (<< 1:0.5)
Depends: sensible-utils
Pre-Depends: libc6 (>= 2.15)
Description: Miscellaneous utilities specific to Debian
This package provides a number of small utilities which are used
primarily by the installation scripts of Debian packages, although
you may use them directly.
.
The specific utilities included are:
add-shell installkernel ischroot remove-shell run-parts savelog
tempfile which
Package: po-debconf
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 448
Maintainer: Herbert Parentes Fortes Neto <hpfn@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.0.20
Depends: perl, gettext (>= 0.16), intltool-debian (>= 0.34.2+20060512)
Recommends: libmail-sendmail-perl, libcompress-zlib-perl
Suggests: libmail-box-perl
Description: tool for managing templates file translations with gettext
This package is an alternative to debconf-utils, and provides tools
for managing translated debconf templates files with common gettext
utilities.
Package: mime-support
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 110
Maintainer: Mime-Support Maintainers <mime-support@plessy.org>
Architecture: all
Multi-Arch: foreign
Version: 3.60
Recommends: bzip2, file, xz-utils
Conffiles:
/etc/mime.types 4561fade4c4fc48e526e72871c470eec
/etc/mailcap.order ba07e08a7fe3741d0b8339127963190e
Description: MIME files 'mime.types' & 'mailcap', and support programs
As these files can be used by all MIME compliant programs, they
have been moved into their own package that others can depend upon.
.
Other packages add themselves as viewers/editors/composers/etc by
using the provided "update-mime" program.
.
In addition, the commands "see", "edit", "compose", and "print"
will display, alter, create, and print (respectively) any file using
a program determined from the entries in the mime.types and mailcap
files.
Package: libio-socket-inet6-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 42
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.72-2
Depends: perl, libsocket6-perl
Description: object interface for AF_INET6 domain sockets
IO::Socket::INET6 provides an object interface to create and use sockets
in the AF_INET6 domain. It is built upon the IO::Socket interface and
inherits all the methods defined by IO::Socket.
Homepage: https://metacpan.org/release/IO-Socket-INET6
Package: lzop
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 97
Maintainer: Peter Eisentraut <petere@debian.org>
Architecture: amd64
Source: lzop (1.03-4)
Version: 1.03-4+b1
Depends: libc6 (>= 2.14), liblzo2-2
Description: fast compression program
lzop is a compressor similar to gzip. Its main advantages over gzip are
much higher compression and decompression speed. lzop was designed with
the following goals in mind:
1) reliability
2) speed (both compression and decompression)
3) reasonable drop-in compatibility with gzip
4) portability
Homepage: http://www.lzop.org/
Package: python3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 67
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.5.3-1
Replaces: python3-minimal (<< 3.1.2-2)
Provides: python3-profiler
Depends: python3.5 (>= 3.5.3-1~), libpython3-stdlib (= 3.5.3-1), dh-python
Pre-Depends: python3-minimal (= 3.5.3-1)
Suggests: python3-doc (>= 3.5.3-1), python3-tk (>= 3.5.3-1~), python3-venv (>= 3.5.3-1)
Description: interactive high-level object-oriented language (default python3 version)
Python, the high-level, interactive object oriented language,
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package is a dependency package, which depends on Debian's default
Python 3 version (currently v3.5).
Homepage: http://www.python.org/
Package: python3-cffi-backend
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 183
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: amd64
Source: python-cffi
Version: 1.9.1-2
Replaces: python3-cffi (<< 1)
Provides: python3-cffi-backend-api-9729, python3-cffi-backend-api-max (= 10239), python3-cffi-backend-api-min (= 9729)
Depends: python3 (<< 3.6), python3 (>= 3.5~), python3:any (>= 3.1~), libc6 (>= 2.14), libffi6 (>= 3.0.4)
Breaks: python3-cffi (<< 1)
Description: Foreign Function Interface for Python 3 calling C code - runtime
Convenient and reliable way of calling C code from Python 3.
.
The aim of this project is to provide a convenient and reliable way of calling
C code from Python. It keeps Python logic in Python, and minimises the C
required. It is able to work at either the C API or ABI level, unlike most
other approaches, that only support the ABI level.
.
This package contains the runtime support for pre-built cffi modules.
Homepage: http://cffi.readthedocs.org/
Package: libhttp-cookies-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 76
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.01-1
Replaces: libwww-perl (<< 6.00)
Depends: perl, libhttp-date-perl, libhttp-message-perl
Breaks: libwww-perl (<< 6.00)
Description: HTTP cookie jars
This class is for objects that represent a "cookie jar" -- that is, a
database of all the HTTP cookies that a given LWP::UserAgent object knows
about.
.
Cookies are a general mechanism which server side connections can use to both
store and retrieve information on the client side of the connection. For more
information about cookies refer to
<URL:http://curl.haxx.se/rfc/cookie_spec.html> and
<URL:http://www.cookiecentral.com/>. HTTP::Cookies also implements the new
style cookies described in RFC 2965. The two variants of cookies are supposed
to be able to coexist happily.
.
Instances of the class HTTP::Cookies are able to store a collection of
Set-Cookie2: and Set-Cookie: headers and are able to use this information to
initialize Cookie-headers in HTTP::Request objects. The state of a
HTTP::Cookies object can be saved in and restored from files.
Homepage: https://metacpan.org/release/HTTP-Cookies
Package: libencode-locale-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 34
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.05-1
Depends: perl
Description: utility to determine the locale encoding
In many applications it's wise to let Perl use Unicode for the strings it
processes. Most of the interfaces Perl has to the outside world are still byte
based. Programs therefore need to decode byte strings that enter the program
from the outside and encode them again on the way out.
.
The POSIX locale system is used to specify both the language conventions
requested by the user and the preferred character set to consume and output.
The Encode::Locale module looks up the charset and encoding (called a CODESET
in the locale jargon) and arranges for the Encode module to know this encoding
under the name "locale". It means bytes obtained from the environment can be
converted to Unicode strings by calling Encode::encode(locale => $bytes) and
converted back again with Encode::decode(locale => $string).
Homepage: https://metacpan.org/release/Encode-Locale
Package: libgcrypt20
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1266
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.7.6-2+deb9u4
Depends: libc6 (>= 2.15), libgpg-error0 (>= 1.14)
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
libgcrypt contains cryptographic functions. Many important free
ciphers, hash algorithms and public key signing algorithms have been
implemented:
.
Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
Poly1305, Camellia, ChaCha20, IDEA, Salsa, CRC, MD2, MD4, MD5, RIPE-MD160,
SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384, SHA3-512, SHAKE128,
SHAKE256 Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC (Curve25519,
sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.)
Homepage: http://directory.fsf.org/project/libgcrypt/
Package: xxd
Status: install ok installed
Priority: extra
Section: editors
Installed-Size: 168
Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: vim
Version: 2:8.0.0197-4+deb9u7
Replaces: vim-common (<< 2:7.4.2347-1~)
Depends: libc6 (>= 2.3.4)
Breaks: vim-common (<< 2:7.4.2347-1~)
Description: tool to make (or reverse) a hex dump
xxd creates a hex dump of a given file or standard input. It can also convert
a hex dump back to its original binary form.
Homepage: http://www.vim.org/
Package: php7.0
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 82
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: all
Version: 7.0.33-0+deb9u12
Provides: php
Depends: libapache2-mod-php7.0 | php7.0-fpm | php7.0-cgi, php7.0-common
Description: server-side, HTML-embedded scripting language (metapackage)
This package is a metapackage that, when installed, guarantees that you
have at least one of the four server-side versions of the PHP interpreter
installed. Removing this package won't remove PHP from your system, however
it may remove other packages that depend on this one.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: geoip-database
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 6841
Maintainer: Patrick Matthäi <pmatthaei@debian.org>
Architecture: all
Version: 20170512-1
Recommends: libgeoip1
Breaks: libgeoip1 (<< 1.4.5.dfsg)
Description: IP lookup command line tools that use the GeoIP library (country database)
GeoIP is a C library that enables the user to find the country that any
IP address or hostname originates from. It uses a file based database.
.
This database simply contains IP blocks as keys, and countries as values and
it should be more complete and accurate than using reverse DNS lookups.
.
This package contains the free GeoLiteCountry database.
Homepage: http://www.maxmind.com/
Package: ruby-test-unit
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 374
Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.1.7-2
Depends: ruby-power-assert
Description: unit testing framework for Ruby
Test::Unit (test-unit) is a unit testing framework for Ruby, based on xUnit
principles. It allows writing tests, checking results and automated testing in
Ruby.
.
Note that this version of Test::Unit will override the one possibly shipped
with the Ruby interpreter.
Homepage: http://test-unit.github.io/
Ruby-Versions: all
Package: nmap
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 22707
Maintainer: Debian Security Tools Packaging Team <pkg-security-team@lists.alioth.debian.org>
Architecture: amd64
Version: 7.40-1
Depends: libc6 (>= 2.15), libgcc1 (>= 1:3.0), liblinear3 (>= 2.01+dfsg), liblua5.3-0, libpcap0.8 (>= 0.9.8), libpcre3, libssl1.1 (>= 1.1.0), libstdc++6 (>= 5.2)
Recommends: ndiff
Description: The Network Mapper
Nmap is a utility for network exploration or security auditing. It
supports ping scanning (determine which hosts are up), many port
scanning techniques, version detection (determine service protocols
and application versions listening behind ports), and TCP/IP
fingerprinting (remote host OS or device identification). Nmap also
offers flexible target and port specification, decoy/stealth scanning,
sunRPC scanning, and more. Most Unix and Windows platforms are
supported in both GUI and commandline modes. Several popular handheld
devices are also supported, including the Sharp Zaurus and the iPAQ.
Homepage: http://nmap.org/
Package: libjemalloc1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 246
Maintainer: Stig Sandbeck Mathisen <ssm@debian.org>
Architecture: amd64
Source: jemalloc
Version: 3.6.0-9.1
Depends: libc6 (>= 2.14)
Description: general-purpose scalable concurrent malloc(3) implementation
A library providing a malloc(3) implementation for multi-threaded processes on
multi-processor systems.
.
Notable features are reduced lock contention, predictable low fragmentation,
and introspection with heap profiling.
Homepage: http://www.canonware.com/jemalloc/
Package: sudo
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3034
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: amd64
Version: 1.8.19p1-2.1+deb9u3
Replaces: sudo-ldap
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libpam-modules, lsb-base
Conflicts: sudo-ldap
Conffiles:
/etc/init.d/sudo 69497d0565055f626ee2bc84f818ce0f
/etc/pam.d/sudo 85da64f888739f193fc0fa896680030e
/etc/sudoers 45437b4e86fba2ab890ac81db2ec3606
/etc/sudoers.d/README 8d3cf36d1713f40a0ddc38e1b21a51b6
Description: Provide limited super user privileges to specific users
Sudo is a program designed to allow a sysadmin to give limited root
privileges to users and log root activity. The basic philosophy is to give
as few privileges as possible but still allow people to get their work done.
.
This version is built with minimal shared library dependencies, use the
sudo-ldap package instead if you need LDAP support for sudoers.
Homepage: http://www.sudo.ws/
Package: libpng16-16
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 413
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpng1.6
Version: 1.6.28-1+deb9u1
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.2.3.4)
Description: PNG library - runtime (version 1.6)
libpng is a library implementing an interface for reading and writing
PNG (Portable Network Graphics) format files.
.
This package contains the runtime library files needed to run software
using libpng.
Homepage: http://libpng.org/pub/png/libpng.html
Package: libfastjson4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 62
Maintainer: Michael Biebl <biebl@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libfastjson
Version: 0.99.4-1
Depends: libc6 (>= 2.14)
Description: fast json library for C
The libfastjson library is a fork from json-c with a focus on performance.
.
This package contains the shared library.
Homepage: https://github.com/rsyslog/libfastjson
Package: libncursesw5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 347
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Depends: libtinfo5 (= 6.0+20161126-1+deb9u2), libc6 (>= 2.14)
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains the shared libraries necessary to run programs
compiled with ncursesw, which includes support for wide characters.
Homepage: http://invisible-island.net/ncurses/
Package: liberror-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 65
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.17024-1
Depends: perl
Description: Perl module for error/exception handling in an OO-ish way
The Error module provides two interfaces. Firstly "Error" provides a
procedural interface to exception handling. Secondly "Error" is a base class
for errors/exceptions that can either be thrown, for subsequent catch, or can
simply be recorded.
.
Errors in the class "Error" should not be thrown directly, but the user
should throw errors from a sub-class of "Error".
.
Warning: Using the "Error" module is no longer recommended due to the
black-magical nature of its syntactic sugar, which often tends to break. Its
maintainers have stopped actively writing code that uses it, and discourage
people from doing so.
.
Recommended alternatives are Exception::Class (libexception-class-perl),
Error::Exception (not packaged), TryCatch (libtrycatch-perl), and Try::Tiny
(libtry-tiny-perl).
Homepage: https://metacpan.org/release/Error
Package: gettext
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 7076
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 0.19.8.1-2+deb9u1
Depends: libc6 (>= 2.17), libcroco3 (>= 0.6.2), libglib2.0-0 (>= 2.12.0), libgomp1 (>= 4.9), libncurses5 (>= 6), libtinfo5 (>= 6), libunistring0, libxml2 (>= 2.9.1), gettext-base, dpkg (>= 1.15.4) | install-info
Recommends: curl | wget | lynx-cur
Suggests: gettext-doc, autopoint, libasprintf-dev, libgettextpo-dev
Breaks: autopoint (<= 0.17-11)
Description: GNU Internationalization utilities
Interesting for authors or maintainers of other packages or programs
which they want to see internationalized.
Homepage: http://www.gnu.org/software/gettext/
Package: curl
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 347
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 7.52.1-5+deb9u16
Depends: libc6 (>= 2.17), libcurl3 (= 7.52.1-5+deb9u16), zlib1g (>= 1:1.1.4)
Description: command line tool for transferring data with URL syntax
curl is a command line tool for transferring data with URL syntax, supporting
DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form
based upload, proxies, cookies, user+password authentication (Basic, Digest,
NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a
busload of other useful tricks.
Homepage: http://curl.haxx.se
Package: amavisd-new
Status: install ok installed
Priority: extra
Section: mail
Installed-Size: 2683
Maintainer: Brian May <bam@debian.org>
Architecture: all
Version: 1:2.10.1-4
Replaces: amavis
Provides: amavis
Depends: adduser (>= 3.34), debconf | debconf-2.0, file, libarchive-tar-perl, libarchive-zip-perl (>= 1.14), libberkeleydb-perl, libconvert-tnef-perl (>= 0.06), libconvert-uulib-perl (>= 1.0.5), libdigest-md5-perl, libio-stringy-perl, libmail-dkim-perl, libmailtools-perl (>= 1.58), libmime-base64-perl, libmime-tools-perl, libnet-libidn-perl, libnet-server-perl, libtime-hires-perl, libunix-syslog-perl, pax, perl (>= 5.10.1) | libcompress-raw-zlib-perl (>= 2.017), perl
Recommends: altermime, libnet-patricia-perl, ripole
Suggests: apt-listchanges (>= 2.35), arj, cabextract, clamav, clamav-daemon, cpio, dspam, lhasa, libauthen-sasl-perl, libdbi-perl (>= 1.43), libmail-dkim-perl (>= 0.31), libnet-ldap-perl (>= 1:0.32), libsnmp-perl, libzeromq-perl, lzop, nomarch, p7zip, rpm, spamassassin (>= 3.1.0a), unrar
Conflicts: amavis, logcheck (<= 1.2.62)
Conffiles:
/etc/amavis/README.l10n bbb66708bafec2e3a006a7c8a00b7fba
/etc/amavis/conf.d/01-debian 8bafedb2fa9ee9fecde4aa799d3abfd6
/etc/amavis/conf.d/05-domain_id 5a3ba3c821a0554711b69bb32ac1ec1a
/etc/amavis/conf.d/05-node_id 3d109ebfe69ba511d3c6583e812996a4
/etc/amavis/conf.d/15-av_scanners a649d3a343fc55231a6cbfa730be9383
/etc/amavis/conf.d/15-content_filter_mode ff3563e0243ee84609ac6550fc940e84
/etc/amavis/conf.d/20-debian_defaults 82a326cc5433960dce50be288ac4ca5f
/etc/amavis/conf.d/25-amavis_helpers 0e846eed3e25e7aff00142ce859fd664
/etc/amavis/conf.d/30-template_localization c0955e34f12453cd5af02c2d2a0fef96
/etc/amavis/conf.d/50-user 9739f0cdb97227db6cfe63c8474275d0
/etc/amavis/en_US/charset df071f78599059e5b73a6618f813050b
/etc/amavis/en_US/template-auto-response.txt 5a53e5694afbabe1d17ba3d4f0c75b89
/etc/amavis/en_US/template-dsn.txt 223a39803783bc8654854f4e26a299ef
/etc/amavis/en_US/template-problem-feedback.txt f81dcc93691c4c75738a3e79d46fcada
/etc/amavis/en_US/template-release-quarantine.txt f88b0a5cc4eae1c5b70cd3eeac60eb49
/etc/amavis/en_US/template-spam-admin.txt 36332a61a9ec0037357d64605f620133
/etc/amavis/en_US/template-spam-sender.txt 5cd876d98aa3f1c0cce9486f0edd988e
/etc/amavis/en_US/template-virus-admin.txt 36109fc98bafabf3ef9098ce867c094c
/etc/amavis/en_US/template-virus-recipient.txt af6d5da9062ec14e733b51ee5a77e29c
/etc/amavis/en_US/template-virus-sender.txt d6146428b420fb5bfb34c2dd4cca7f89
/etc/cron.d/amavisd-new 2c283e533f525067201141f167477fc8
/etc/default/amavis-mc 6c6c2528750ddd9c16c4ffb8e4b614e8
/etc/default/amavisd-snmp-subagent 0dada54b357dc873d1ea3f121e1f5468
/etc/init.d/amavis 86921647364eb0221c89829a680c5c41
/etc/init.d/amavis-mc b6b7b0034a330cf615a6cf8efa7228bb
/etc/init.d/amavisd-snmp-subagent b60aee679ebcd5ad3fa723ba11516318
/etc/ldap/schema/amavis.schema 6156b1e5fe1579839433480cd2a8b0e9
/etc/spamassassin/sa-update-hooks.d/amavisd-new aaab9a78bec4858d0bc25b1b31c6ef52
Description: Interface between MTA and virus scanner/content filters
AMaViSd-new is a script that interfaces a mail transport agent (MTA) with
zero or more virus scanners, and spamassassin (optional).
.
It supports all common virus scanners (more than 20 different AVs), with
direct talk-to-daemon support for ClamAV, OpenAntiVirus, Trophie, AVG,
f-prot, and Sophos AVs.
.
AMaViSd-new supports all MTAs through its generic SMTP/LMTP filter mode
(ideal for postfix and exim). It is faster and safer to use the SMTP/LMTP
filter mode than using the AMaViS pipe client. It supports sendmail milter
through the amavisd-new-milter package.
Homepage: http://www.ijs.si/software/amavisd/
Package: libaprutil1-dbd-sqlite3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 48
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.5.4-3
Depends: libaprutil1 (= 1.5.4-3), libc6 (>= 2.4), libsqlite3-0 (>= 3.5.9)
Description: Apache Portable Runtime Utility Library - SQLite3 Driver
APR is Apache's Portable Runtime Library, designed to be a support library
that provides a predictable and consistent interface to underlying
platform-specific implementations.
.
APR Util is a utilities library implemented on top of apr, providing database
access, xml parsing, and other useful functionality.
.
This package contains the SQLite3 database driver.
Homepage: http://apr.apache.org/
Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 5798
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.4-5
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: dash (>= 0.5.5.1-2.2), libc6 (>= 2.15), libtinfo5 (>= 6)
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
/etc/bash.bashrc 87b895cef45b8090d628a1d9a0f4bfb8
/etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
/etc/skel/.bashrc ee35a240758f374832e809ae0ea4883a
/etc/skel/.profile ecb6d3479ac3823f1da7f314d871989b
Description: GNU Bourne Again SHell
Bash is an sh-compatible command language interpreter that executes
commands read from the standard input or from a file. Bash also
incorporates useful features from the Korn and C shells (ksh and csh).
.
Bash is ultimately intended to be a conformant implementation of the
IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
.
The Programmable Completion Code, by Ian Macdonald, is now found in
the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html
Package: apache2-doc
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 22919
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: all
Source: apache2
Version: 2.4.25-3+deb9u13
Recommends: apache2
Conffiles:
/etc/apache2/conf-available/apache2-doc.conf ca93d92fa84f4c1656a1264792843435
Description: Apache HTTP Server (on-site documentation)
The Apache HTTP Server Project's goal is to build a secure, efficient and
extensible HTTP server as standards-compliant open source software. The
result has long been the number one web server on the Internet.
.
This package provides the documentation for the Apache 2 HTTP server. The
documentation is shipped in HTML format and can be accessed from a local
running Apache HTTP server instance or by browsing the file system directly.
Homepage: http://httpd.apache.org/
Package: flex
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1174
Maintainer: Manoj Srivastava <srivasta@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.6.1-1.3
Depends: libc6 (>= 2.14), m4, dpkg (>= 1.15.4) | install-info
Pre-Depends: debconf | debconf-2.0
Recommends: gcc | c-compiler, libfl-dev
Suggests: bison, build-essential
Description: fast lexical analyzer generator
Flex is a tool for generating scanners: programs which recognized lexical
patterns in text. It reads the given input files for a description of a
scanner to generate. The description is in the form of pairs of regular
expressions and C code, called rules. Flex generates as output a C source
file, lex.yy.c, which defines a routine yylex(). This file is compiled
and linked with the -lfl library to produce an executable. When the
executable is run, it analyzes its input for occurrences of the regular
expressions. Whenever it finds one, it executes the corresponding C code.
Homepage: http://flex.sf.net/
Package: libtimedate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 124
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.3000-2+deb9u1
Replaces: timedate
Provides: timedate
Depends: perl
Breaks: timedate
Description: collection of modules to manipulate date/time information
TimeDate is a collection of Perl modules useful for manipulating date and
time information. Date::Parse can parse absolute date specifications in a
wide variety of input formats and many languages (via Date::Language).
.
This package also includes Date::Format, which can format dates into strings,
as well as Time::Zone, which contains miscellaneous time zone functions.
Homepage: https://metacpan.org/release/TimeDate
Package: dictionaries-common
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 757
Maintainer: Agustin Martin Domingo <agmartin@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.27.2
Replaces: openoffice.org-updatedicts
Provides: openoffice.org-updatedicts
Depends: debconf (>= 1.5.5) | debconf-2.0, libtext-iconv-perl, emacsen-common (>= 2.0.5)
Suggests: ispell | aspell | hunspell, wordlist
Breaks: hunspell-ar (<= 0.0.0+20080110-1.1), hunspell-da (<= 1:3.1.0), hunspell-de-at (<= 20100727-1), hunspell-de-ch (<= 20100727-1), hunspell-de-de (<= 20100727-1), hunspell-en-us (<= 20070829-4ubuntu2), hunspell-eu-es (<= 0.4.20081029-4), hunspell-gl-es (<= 2.2a-8), hunspell-kk (<= 1.1-1), hunspell-ko (<= 0.5.3-1), hunspell-se (<= 1.0~beta6.20081222-1.1), hunspell-uz (<= 0.6-3.1), hyphen-en-us (<< 2.8.3-1), myspell-bg (<= 3.0-12), myspell-ca (<= 0.6-10), myspell-cs (<= 20040229-5), myspell-cs-cz (<= 20040229-5), myspell-da (<= 1.6.25-1), myspell-de-at (<= 20100727-1), myspell-de-ch (<= 20100727-1), myspell-de-de (<= 20100727-1), myspell-de-de-oldspell (<= 1:2-27), myspell-el-gr (<= 0.8-1), myspell-en-au (<= 2.1-5), myspell-eo (<= 2.1.2000.02.25-42), myspell-es (<= 1.11-1), myspell-et (<= 1:20030606-12.1), myspell-eu-es (<= 0.4.20081029-4), myspell-fa (<= 0.20070816-2), myspell-fi (<= 0.7-17.3), myspell-fo (<= 0.2.44-2), myspell-fr (<= 1.4-25), myspell-fr-gut (<= 1:1.0-28), myspell-ga (<= 2.0-20), myspell-gd (<= 0.50-7), myspell-gl-es (<= 2.2a-8), myspell-gv (<= 0.50-9), myspell-he (<= 1.1-1), myspell-hr (<= 20060617-2), myspell-hu (<= 0.99.4-2), myspell-hy (<= 0.20.0-1), myspell-ku (<= 0.20.0-1.1), myspell-lv (<= 0.9.3-2), myspell-nb (<= 2.0.10-3.2), myspell-nl (<= 1:2.0-1), myspell-nn (<= 2.0.10-3.2), myspell-nr (<< 20070206-4ubuntu1), myspell-ns (<< 20070206-4ubuntu1), myspell-pl (<= 20100612-1), myspell-pt-br (<= 20101030-1), myspell-pt-pt (<= 20091013-2), myspell-ru (<= 0.99g5-8.1), myspell-sk (<= 0.5.5a-2.1fakesync1), myspell-sl (<< 1.0-3ubuntu1), myspell-ss (<< 20070206-4ubuntu1), myspell-sv-se (<= 1.3.8-6-2.2), myspell-tn (<< 20070206-4ubuntu1), myspell-ts (<< 20070207-4ubuntu1), myspell-uk (<= 1.6.0-1), myspell-ve (<< 20070206-3ubuntu1), myspell-xh (<< 20070206-4ubuntu1), myspell-zu (<< 20070207-5ubuntu1), mythes-it (<= 2.0.7.gh.deb1-3), openoffice.org-thesaurus-it (<< 2.0.7.gh.deb1-1.1ubuntu3)
Conffiles:
/etc/emacs/site-start.d/50dictionaries-common.el e069a746e508f771d47825f19f7bba4f
Description: spelling dictionaries - common utilities
This package provides utilities shared between all wordlists and spelling
dictionaries for Ispell, Aspell, or MySpell/Hunspell. It also includes
support infrastructure for software using them (such as JED and Mutt),
and some patched spell-checking Lisp files for better Emacs integration.
.
More information about the availability of these dictionaries and their
naming conventions is available in the README.Debian file.
Homepage: http://dict-common.alioth.debian.org
Package: php-net-smtp
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 81
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Version: 1.7.1-2
Depends: php-common, php-net-socket (>= 1.0.7)
Recommends: php-auth-sasl (>= 1.0.5)
Description: PHP PEAR module implementing SMTP protocol
Provides an implementation of the SMTP protocol using PEAR's Net_Socket class.
The php-net-smtp package supports the SMTP authentication standard (as defined
by RFC-2554) if you also install the php-auth-sasl package. Net_SMTP then
supports several authentication methods like DIGEST-MD5, CRAM-MD5, LOGIN and
PLAIN.
Homepage: http://pear.php.net/package/Net_SMTP
Package: liblcms2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 404
Maintainer: Thomas Weber <tweber@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lcms2
Version: 2.8-4+deb9u1
Depends: libc6 (>= 2.14)
Suggests: liblcms2-utils
Description: Little CMS 2 color management library
LittleCMS 2 intends to be a small-footprint color management engine, with
special focus on accuracy and performance. It uses the International Color
Consortium standard (ICC) of color management. LittleCMS 2 is a full
implementation of ICC specification 4.2 plus all addendums. It fully supports
all V2 and V4 profiles, including abstract, devicelink and named color
profiles.
.
This package contains the shared library of liblcms2.
Homepage: http://www.littlecms.com/
Package: libnet-ip-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 134
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.26-1
Depends: perl
Description: Perl extension for manipulating IPv4/IPv6 addresses
Net::IP provides functions to deal with IPv4/IPv6 addresses.
The module can be used as a class, allowing the user to instantiate IP
objects, which can be single IP addresses, prefixes, or ranges of addresses.
There is also a procedural way of accessing most of the functions. Most
subroutines can take either IPv4 or IPv6 addresses transparently.
Homepage: http://search.cpan.org/dist/Net-IP/
Package: isc-dhcp-common
Status: install ok installed
Priority: important
Section: net
Installed-Size: 141
Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Architecture: amd64
Source: isc-dhcp
Version: 4.3.5-3+deb9u2
Depends: debianutils (>= 2.8.2)
Description: common manpages relevant to all of the isc-dhcp packages
This package includes manpages that are relevant to the various ISC DHCP
packages.
.
The dhcp-options manpage describes available options for dhcpd and dhclient.
The dhcp-eval manpage describes evaluation of conditional expressions.
Homepage: http://www.isc.org
Package: python-openssl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 198
Maintainer: Sandro Tosi <morph@debian.org>
Architecture: all
Source: pyopenssl
Version: 16.2.0-1
Depends: python-cryptography (>= 1.3.4), python-six (>= 1.5.2), python:any (<< 2.8), python:any (>= 2.7.5-5~)
Suggests: python-openssl-doc, python-openssl-dbg
Description: Python 2 wrapper around the OpenSSL library
High-level wrapper around a subset of the OpenSSL library, includes
.
* SSL.Connection objects, wrapping the methods of Python's portable
sockets
* Callbacks written in Python
* Extensive error-handling mechanism, mirroring OpenSSL's error
codes
.
A lot of the object methods do nothing more than calling a
corresponding function in the OpenSSL library.
Homepage: https://github.com/pyca/pyopenssl
Package: dmidecode
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 190
Maintainer: Jörg Frings-Fürst <debian@jff-webhosting.net>
Architecture: amd64
Version: 3.0-4
Depends: libc6 (>= 2.4)
Description: SMBIOS/DMI table decoder
Dmidecode reports information about the system's hardware as described in the
system BIOS according to the SMBIOS/DMI standard.
.
This information typically includes system manufacturer, model name, serial
number, BIOS version, asset tag as well as a lot of other details of varying
level of interest and reliability depending on the manufacturer. This will
often include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI,
ISA) and memory module slots, and the list of I/O ports (e.g. serial, parallel,
USB).
.
Beware that DMI data have proven to be too unreliable to be blindly trusted.
Dmidecode does not scan the hardware, it only reports what the BIOS told it to.
Homepage: https://dmidecode.nongnu.org/
Package: libjbig0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 78
Maintainer: Michael van der Kolff <mvanderkolff@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: jbigkit (2.1-3.1)
Version: 2.1-3.1+b2
Depends: libc6 (>= 2.4)
Description: JBIGkit libraries
JBIG-KIT provides a portable library of compression and decompression functions
with a documented interface that you can include very easily into your image or
document processing software.
.
This package contains the dynamically linked library.
Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/
Package: cloud-image-utils
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 61
Maintainer: Tiago Ilieve <tiago.myhro@gmail.com>
Architecture: all
Source: cloud-utils
Version: 0.29-1
Replaces: cloud-utils (<< 0.28~bzr281)
Depends: ca-certificates, e2fsprogs (>= 1.4), file, genisoimage, qemu-utils, wget, python3:any
Recommends: distro-info
Suggests: cloud-utils-euca
Breaks: cloud-utils (<< 0.28~bzr281)
Description: cloud image management utilities
This package provides a useful set of utilities for working with cloud
images. It contains tools to help in modifying cloud images, running, and
querying data related to cloud-images.
Homepage: https://launchpad.net/cloud-utils
Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 107
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4)
Recommends: uuid-runtime
Description: Universally Unique ID library
The libuuid library generates and parses 128-bit Universally Unique
IDs (UUIDs). A UUID is an identifier that is unique within the space
of all such identifiers across both space and time. It can be used for
multiple purposes, from tagging objects with an extremely short lifetime
to reliably identifying very persistent objects across a network.
.
See RFC 4122 for more information.
Package: busybox
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 729
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: amd64
Version: 1:1.22.0-19+deb9u2
Replaces: busybox-static
Depends: libc6 (>= 2.16)
Breaks: initramfs-tools (<< 0.99)
Conflicts: busybox-static
Description: Tiny utilities for small and embedded systems
BusyBox combines tiny versions of many common UNIX utilities into a single
small executable. It provides minimalist replacements for the most common
utilities you would usually find on your desktop system (i.e., ls, cp, mv,
mount, tar, etc.). The utilities in BusyBox generally have fewer options than
their full-featured GNU cousins; however, the options that are included
provide the expected functionality and behave very much like their GNU
counterparts.
.
This package installs the BusyBox binary but does not install
symlinks for any of the supported utilities. Some of the utilities
can be used in the system by installing the busybox-syslogd,
busybox-udhcpc or busybox-udhcpd packages.
Homepage: http://www.busybox.net
Package: libsigsegv2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 54
Maintainer: Debian Common Lisp Team <pkg-common-lisp-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsigsegv
Version: 2.10-5
Depends: libc6 (>= 2.4)
Description: Library for handling page faults in a portable way
GNU libsigsegv is a library that allows handling page faults in a
portable way. It is used e.g. for generational garbage collectors
and stack overflow handlers.
.
This package contains the shared library.
Homepage: http://libsigsegv.sourceforge.net/
Package: libdb5.3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1814
Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: db5.3
Version: 5.3.28-12+deb9u1
Depends: libc6 (>= 2.17)
Description: Berkeley v5.3 Database Libraries [runtime]
This is the runtime package for programs that use the v5.3 Berkeley
database library.
Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html
Package: libnet-ssleay-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 1124
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 1.80-1
Depends: perl (>= 5.24.1~rc4-1), perl-openssl-abi-1.1, perlapi-5.24.1, libc6 (>= 2.14), libssl1.1 (>= 1.1.0)
Suggests: libmime-base64-perl
Description: Perl module for Secure Sockets Layer (SSL)
Net::SSLeay is a perl module that allows you to call Secure Sockets Layer
(SSL) functions of the SSLeay library directly from your perl scripts. It
is useful if you want to program robots that access secure web servers or
if you want to build your own applications over SSL encrypted tunnels. If
you just want to view web pages on https servers, you do not need this -
your web browser already knows to do that.
Homepage: https://metacpan.org/release/Net-SSLeay
Package: build-essential
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 20
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Version: 12.3
Depends: libc6-dev | libc-dev, gcc (>= 4:6.3), g++ (>= 4:6.3), make, dpkg-dev (>= 1.17.11)
Description: Informational list of build-essential packages
If you do not plan to build Debian packages, you don't need this
package. Starting with dpkg (>= 1.14.18) this package is required
for building Debian packages.
.
This package contains an informational list of packages which are
considered essential for building Debian packages. This package also
depends on the packages on that list, to make it easy to have the
build-essential packages installed.
.
If you have this package installed, you only need to install whatever
a package specifies as its build-time dependencies to build the
package. Conversely, if you are determining what your package needs
to build-depend on, you can always leave out the packages this
package depends on.
.
This package is NOT the definition of what packages are
build-essential; the real definition is in the Debian Policy Manual.
This package contains merely an informational list, which is all
most people need. However, if this package and the manual disagree,
the manual is correct.
Package: php7.0-cgi
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 8407
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-cgi, phpapi-20151012
Depends: libmagic1, libpcre3 (>= 1:8.20), mime-support, php7.0-cli, php7.0-common (= 7.0.33-0+deb9u12), php7.0-json, php7.0-opcache, tzdata, ucf, libc6 (>= 2.15), libssl1.1 (>= 1.1.0), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Conffiles:
/etc/apache2/conf-available/php7.0-cgi.conf 3f06c7d8c424a02f4a487ae750efb3ca
Description: server-side, HTML-embedded scripting language (CGI binary)
This package provides the /usr/lib/cgi-bin/php CGI interpreter built
for use in Apache 2 with mod_actions, or any other CGI httpd that
supports a similar mechanism. Note that MOST users probably
want the php7.0-fpm package.
.
The following extensions are built in: Core date filter hash libxml openssl
pcntl pcre Reflection session SPL standard zlib.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libldap-common
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 109
Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: openldap
Version: 2.4.44+dfsg-5+deb9u9
Replaces: libldap-2.4-2 (<< 2.4.44+dfsg-1)
Conffiles:
/etc/ldap/ldap.conf 0b3f4d19d88498314478273ce10b0a70
Description: OpenLDAP common files for libraries
These are common files for the run-time libraries for the OpenLDAP
(Lightweight Directory Access Protocol) servers and clients.
Homepage: http://www.openldap.org/
Package: libaspell15
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2149
Maintainer: Brian Nelson <pyro@debian.org>
Architecture: amd64
Multi-Arch: same
Source: aspell
Version: 0.60.7~20110707-3+deb9u1
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5)
Recommends: aspell-en | aspell-dictionary | aspell6a-dictionary
Suggests: aspell
Breaks: aspell-bin (<< 0.60.3-2), aspell-da (<= 1.6.25-1.1), aspell-no (<= 2.0.10-5.1)
Conflicts: aspell6-dictionary
Description: GNU Aspell spell-checker runtime library
These are the runtime parts of the Aspell and pspell spell-checking
toolkits, needed by applications that use the toolkits at runtime.
.
For a standalone spell-checker, install aspell as well.
Homepage: http://aspell.net/
Package: libcurl3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 637
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 7.52.1-5+deb9u16
Depends: libc6 (>= 2.17), libcomerr2 (>= 1.01), libgssapi-krb5-2 (>= 1.14+dfsg), libidn2-0 (>= 0.6), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libldap-2.4-2 (>= 2.4.7), libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.13.0), librtmp1 (>= 2.4+20131018.git79459a2-3~), libssh2-1 (>= 1.7.0), libssl1.0.2 (>= 1.0.2d), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Description: easy-to-use client-side URL transfer library (OpenSSL flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
SSL support is provided by OpenSSL.
Homepage: http://curl.haxx.se
Package: fonts-dejavu-core
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 2954
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-dejavu
Version: 2.37-1
Replaces: ttf-dejavu (<< 2.20-1), ttf-dejavu-core (<< 2.33+svn2514-2~)
Breaks: ttf-dejavu (<< 2.20-1), ttf-dejavu-core (<< 2.33+svn2514-2~)
Conffiles:
/etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans-mono.conf 10d6f2176d76ee9b89a19a17811257f2
/etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans.conf 6488b24401e477e35aa71237054c8ada
/etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-serif.conf 0b01522fe76b4e5b8ab3d12383371348
/etc/fonts/conf.avail/20-unhint-small-dejavu-sans-mono.conf 0cbf30e4580c5a8570da071ab12c5e4d
/etc/fonts/conf.avail/20-unhint-small-dejavu-sans.conf f7df7bba810dd953dd78212900f4dcad
/etc/fonts/conf.avail/20-unhint-small-dejavu-serif.conf e90c678d46f49bb9d6ba469b64e80c0c
/etc/fonts/conf.avail/57-dejavu-sans-mono.conf d3e4d007a9ac6c47243b5994f1d195e3
/etc/fonts/conf.avail/57-dejavu-sans.conf 29cfe6c581fe2dbc222525ce00097002
/etc/fonts/conf.avail/57-dejavu-serif.conf 1dca2f4ec93842e94f3919f7e0c8f7a9
/etc/fonts/conf.avail/58-dejavu-lgc-sans-mono.conf d2ee39274982cb4f831783cff742c8bc
/etc/fonts/conf.avail/58-dejavu-lgc-sans.conf b4a8f51e45aa24fdee47b3f838cc0205
/etc/fonts/conf.avail/58-dejavu-lgc-serif.conf 5f0b00e681b1f40b65dd336696ee0bbb
Description: Vera font family derivate with additional characters
DejaVu provides an expanded version of the Vera font family aiming for
quality and broader Unicode coverage while retaining the original Vera
style. DejaVu currently works towards conformance with the Multilingual
European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
fonts provide serif, sans and monospaced variants.
.
This package only contains the sans, sans-bold, serif, serif-bold,
mono and mono-bold variants. For additional variants, see the
ttf-dejavu-extra package.
.
DejaVu fonts are intended for use on low-resolution devices (mainly
computer screens) but can be used in printing as well.
Homepage: http://dejavu-fonts.org/
Package: libapache2-mod-python
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 485
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: amd64
Version: 3.3.1-11
Depends: apache2-api-20120211, python (>= 2.7), python (<< 2.8), libc6 (>= 2.14), libpython2.7 (>= 2.7)
Suggests: libapache2-mod-python-doc
Conffiles:
/etc/apache2/mods-available/python.load 0ce662d08e252896b88072b3476013f4
Description: Python-embedding module for Apache 2
The mod_python module supports web applications written in Python.
Because the parser is embedded in the server as an Apache module, it
will run much faster than traditional CGI.
.
This package is built for the current Python version.
Homepage: http://www.modpython.org/
Package: initramfs-tools-core
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 210
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: initramfs-tools
Version: 0.130
Replaces: initramfs-tools (<< 0.121~)
Depends: klibc-utils (>= 2.0.4-8~), cpio, kmod | module-init-tools, udev
Recommends: busybox (>= 1:1.22.0-17~) | busybox-static (>= 1:1.22.0-17~)
Suggests: bash-completion
Breaks: busybox (<< 1:1.22.0-17~), busybox-static (<< 1:1.22.0-17~), initramfs-tools (<< 0.121~)
Conffiles:
/etc/initramfs-tools/initramfs.conf 7690949b00a8a2c0fad84fa4e965b00c
Description: generic modular initramfs generator (core tools)
This package contains the mkinitramfs program that can be used to
create a bootable initramfs for a Linux kernel. The initramfs should
be loaded along with the kernel and is then responsible for mounting
the root filesystem and starting the main init system.
Package: jailkit
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 292
Maintainer: Olivier Sessink <olivier@lx.student.wau.nl>
Architecture: amd64
Version: 2.19-1
Depends: libc6 (>= 2.14), python (>= 2.1.3)
Conffiles:
/etc/init.d/jailkit 6daadfdae1008a9d93ac9e4d9d95b21a
/etc/jailkit/jk_check.ini 67838da82ef1060d6baf4c6b98704d03
/etc/jailkit/jk_chrootsh.ini 7672fbb5d5d757ea287677266a9e955d
/etc/jailkit/jk_init.ini ce511a0b56f096297bd6e9b94d4b1030
/etc/jailkit/jk_lsh.ini c7655233401c2ab372e8a1a4e75ecacb
/etc/jailkit/jk_socketd.ini d7710d546fd72eea95025f3addaef5b5
/etc/jailkit/jk_uchroot.ini 929da862e373c2caa6002d285e84b982
/etc/jailkit/jk_update.ini 8d3c93fea3b16e9b1d174aec8bc2588f
Description: chroot jail utilities
Jailkit is a set of utilities to create chroot jails for users, processes
and daemons. There are utilities to build a jail, to test a jail, and
to run a jail. See 'man jailkit' for further information.
The jailkit website is at http://olivier.sessink.nl/jailkit/
Package: python-certbot
Status: install ok installed
Priority: extra
Section: python
Installed-Size: 861
Maintainer: Debian Let's Encrypt <letsencrypt-devel@lists.alioth.debian.org>
Architecture: all
Version: 0.10.2-1
Replaces: python-letsencrypt
Depends: python-acme (>= 0.10.2), python-requests (>= 2.4.3), python-configargparse (>= 0.9.3), python-configobj, python-cryptography (>= 0.7), python-mock, python-openssl, python-parsedatetime (>= 1.3), python-rfc3339, python-setuptools (>= 1.0), python-six, python-tz, python-zope.component, python-zope.interface, python:any (<< 2.8), python:any (>= 2.7.5-5~)
Recommends: certbot, python-psutil (>= 2.2.1)
Suggests: python-certbot-doc
Breaks: python-certbot-apache (<< 0.10.2), python-certbot-nginx (<< 0.10.2), python-letsencrypt (<= 0.6.0)
Description: main library for certbot
The objective of Certbot, Let's Encrypt, and the ACME (Automated
Certificate Management Environment) protocol is to make it possible
to set up an HTTPS server and have it automatically obtain a
browser-trusted certificate, without any human intervention. This is
accomplished by running a certificate management agent on the web
server.
.
This agent is used to:
.
- Automatically prove to the Let's Encrypt CA that you control the website
- Obtain a browser-trusted certificate and set it up on your web server
- Keep track of when your certificate is going to expire, and renew it
- Help you revoke the certificate if that ever becomes necessary.
.
This package contains the main libraries.
Homepage: https://certbot.eff.org/
Package: libcilkrts5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 143
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 4.1.1)
Description: Intel Cilk Plus language extensions (runtime)
Intel Cilk Plus is an extension to the C and C++ languages to support
data and task parallelism.
Homepage: http://gcc.gnu.org/
Package: apt-utils
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 1099
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Source: apt
Version: 1.4.11
Depends: apt (= 1.4.11), libapt-inst2.0 (>= 1.0.5), libapt-pkg5.0 (>= 1.3~rc2), libc6 (>= 2.14), libdb5.3, libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Description: package management related utility programs
This package contains some less used commandline utilities related
to package management with APT.
.
* apt-extracttemplates is used by debconf to prompt for configuration
questions before installation.
* apt-ftparchive is used to create Packages and other index files
needed to publish an archive of Debian packages
* apt-sortpkgs is a Packages/Sources file normalizer.
Package: libuv1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 194
Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.9.1-3
Depends: libc6 (>= 2.14)
Description: asynchronous event notification library - runtime library
Libuv is the asynchronous library behind Node.js. Very similar to libevent or
libev, it provides the main elements for event driven systems: watching and
waiting for availability in a set of sockets, and some other events like timers
or asynchronous messages. However, libuv also comes with some other extras
like:
* files watchers and asynchronous operations
* a portable TCP and UDP API, as well as asynchronous DNS resolution
* processes and threads management, and a portable inter-process
communications mechanism, with pipes and work queues
* a plugins mechanism for loading libraries dynamically
* interface with external libraries that also need to access the I/O.
.
This package includes the dynamic library against which you can link
your program.
Homepage: https://github.com/libuv/libuv
Package: libreadline7
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 416
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: readline
Version: 7.0-3
Depends: readline-common, libc6 (>= 2.15), libtinfo5 (>= 6)
Description: GNU readline and history libraries, run-time libraries
The GNU readline library aids in the consistency of user interface
across discrete programs that need to provide a command line
interface.
.
The GNU history library provides a consistent user interface for
recalling lines of previously typed input.
Package: memcached
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 273
Maintainer: David Martínez Moreno <ender@debian.org>
Architecture: amd64
Version: 1.4.33-1+deb9u1
Depends: libc6 (>= 2.17), libevent-2.0-5 (>= 2.0.10-stable), libsasl2-2, perl, init-system-helpers (>= 1.18~), lsb-base (>= 3.2-13), adduser
Suggests: libcache-memcached-perl, libmemcached, libanyevent-perl, libyaml-perl, libterm-readkey-perl
Conffiles:
/etc/default/memcached 58efa3a45665c4aa98575579f2bca8ac
/etc/init.d/memcached 3da0eba62167b4ebf1962e0dd335993a
Description: high-performance memory object caching system
Danga Interactive developed memcached to enhance the speed of LiveJournal.com,
a site which was already doing 20 million+ dynamic page views per day for 1
million users with a bunch of webservers and a bunch of database servers.
memcached dropped the database load to almost nothing, yielding faster page
load times for users, better resource utilization, and faster access to the
databases on a memcache miss.
.
memcached optimizes specific high-load serving applications that are designed
to take advantage of its versatile no-locking memory access system. Clients
are available in several different programming languages, to suit the needs
of the specific application. Traditionally this has been used in mod_perl
apps to avoid storing large chunks of data in Apache memory, and to share
this burden across several machines.
Homepage: http://www.memcached.org/
Package: libapache2-mod-php7.0
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 4243
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: libapache2-mod-php, phpapi-20151012
Depends: libmagic1, libpcre3 (>= 1:8.20), mime-support, php7.0-cli, php7.0-common (= 7.0.33-0+deb9u12), php7.0-json, php7.0-opcache, tzdata, ucf, apache2-api-20120211, apache2-bin (>= 2.4.16), libc6 (>= 2.15), libssl1.1 (>= 1.1.0), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Recommends: apache2
Suggests: php-pear
Conffiles:
/etc/apache2/mods-available/php7.0.conf 7b91f8ac555faba6042a634ac4749a31
/etc/apache2/mods-available/php7.0.load 3a30e46c1300df8988da3a825bc276aa
Description: server-side, HTML-embedded scripting language (Apache 2 module)
This package provides the PHP module for the Apache 2 webserver (as
found in the apache2-mpm-prefork package). Please note that this package
ONLY works with Apache's prefork MPM, as it is not compiled thread-safe.
.
The following extensions are built in: Core date filter hash libxml openssl
pcre Reflection session SPL standard zlib.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: debconf
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 558
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.5.61
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.20.1-3~)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
/etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
/etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
Debconf is a configuration management system for debian packages. Packages
use Debconf to ask questions when they are installed.
Package: debconf-i18n
Status: install ok installed
Priority: important
Section: localization
Installed-Size: 780
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Source: debconf
Version: 1.5.61
Replaces: debconf (<< 1.3.0), debconf-utils (<< 1.3.22)
Depends: debconf (= 1.5.61), liblocale-gettext-perl, libtext-iconv-perl, libtext-wrapi18n-perl, libtext-charwidth-perl
Conflicts: debconf-english, debconf-utils (<< 1.3.22)
Description: full internationalization support for debconf
This package provides full internationalization for debconf, including
translations into all available languages, support for using translated
debconf templates, and support for proper display of multibyte character
sets.
Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 156
Maintainer: Mark Brown <broonie@debian.org>
Architecture: amd64
Multi-Arch: same
Source: zlib
Version: 1:1.2.8.dfsg-5+deb9u1
Provides: libz1
Depends: libc6 (>= 2.14)
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This package includes the shared library.
Homepage: http://zlib.net/
Package: arj
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 517
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Version: 3.10.22-15
Depends: libc6 (>= 2.14)
Conffiles:
/etc/rearj.cfg 09221c7fffdc54f60b889da19a8e316b
Description: archiver for .arj files
This package is an open source version of the arj archiver. This version
has been created with the intent to preserve maximum compatibility and
retain the feature set of original ARJ archiver as provided by
ARJ Software, Inc.
Homepage: http://sf.net/projects/arj/
Package: python-parsedatetime
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 177
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: parsedatetime
Version: 2.1-3+deb9u1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~), base-files (>= 4.0.4)
Recommends: python-pyicu
Description: Python module to parse human-readable date/time expressions
parsedatetime is able to parse, for example, the following:
.
* August 25th, 2008
* 25 Aug 2008
* Aug 25 5pm
* 5pm August 25
* next saturday
* tomorrow
* next thursday at 4pm
* at 4pm
* eod
* tomorrow eod
* eod tuesday
* eoy
* eom
* in 5 minutes
* 5 minutes from now
* 5 hours before now
* 2 hours before noon
* 2 days from tomorrow
.
This package provides the modules for Python 2.
Homepage: https://pypi.python.org/pypi/parsedatetime/
Package: libexttextcat-2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 47
Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libexttextcat (3.4.4-2)
Version: 3.4.4-2+b1
Depends: libc6 (>= 2.14), libexttextcat-data (= 3.4.4-2)
Description: Language detection library
Libextttextcat is a library with functions that implement the classification
technique described in Cavnar & Trenkle, "N-Gram-Based Text Categorization".
It was primarily developed for language guessing, a task on which it is known
to perform with near-perfect accuracy.
Homepage: https://wiki.documentfoundation.org/Libexttextcat
Package: perl-openssl-defaults
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 27
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 3
Provides: perl-openssl-abi-1.1
Depends: libc6 (>= 2.2.5), libssl1.1 (>= 1.1.0)
Breaks: libcrypt-openssl-bignum-perl (<< 0.07-2), libcrypt-openssl-dsa-perl (<< 0.18-2), libcrypt-openssl-pkcs10-perl (<< 0.16-2), libcrypt-openssl-pkcs12-perl (<< 0.7-3), libcrypt-openssl-rsa-perl (<< 0.28-5), libcrypt-openssl-x509-perl (<< 1.8.7-3), libcrypt-smime-perl (<< 0.19-2), libcrypt-ssleay-perl (<< 0.73.04-2), libnet-ssleay-perl (<< 1.78-2)
Description: version compatibility baseline for Perl OpenSSL packages
A subset of Perl XS module packages expose the OpenSSL binary interface
to Perl code. This can lead to incompatibilities if these packages are
linked against different versions of OpenSSL.
.
This package provides a virtual package "perl-openssl-abi-x" that
corresponds to the libssl-dev package SONAME it was built against.
The packages that need to stay compatible with each other can depend
on this.
.
Tools are also provided for generating this dependency with minimum
hassle. See the instructions in README.Debian.
Package: libblas-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 23
Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: lapack
Version: 3.7.0-2
Description: Dependency package for all BLAS implementations
The only purpose of this empty package is to ensure multi-arch safety of
different BLAS implementations. See bug #760936 for more details.
Homepage: http://www.netlib.org/lapack/
Package: socat
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 1006
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Version: 1.7.3.1-2+deb9u1
Depends: libc6 (>= 2.15), libssl1.1 (>= 1.1.0), libwrap0 (>= 7.6-4~)
Description: multipurpose relay for bidirectional data transfer
Socat (for SOcket CAT) establishes two bidirectional byte streams
and transfers data between them. Data channels may be files, pipes,
devices (terminal or modem, etc.), or sockets (Unix, IPv4, IPv6, raw,
UDP, TCP, SSL). It provides forking, logging and tracing, different
modes for interprocess communication and many more options.
.
It can be used, for example, as a TCP relay (one-shot or daemon),
as an external socksifier, as a shell interface to Unix sockets,
as an IPv6 relay, as a netcat and rinetd replacement, to redirect
TCP-oriented programs to a serial line, or to establish a relatively
secure environment (su and chroot) for running client or server shell
scripts inside network connections. Socat supports sctp as of 1.7.0.
Homepage: http://www.dest-unreach.org/socat/
Package: libjson-c3
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 69
Maintainer: fabien boucher <fabien.dot.boucher@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: json-c
Version: 0.12.1-1.1+deb9u1
Depends: libc6 (>= 2.14)
Description: JSON manipulation library - shared library
This library allows you to easily construct JSON objects in C,
output them as JSON formatted strings and parse JSON formatted
strings back into the C representation of JSON objects.
Homepage: https://github.com/json-c/json-c/wiki
Package: apache2-utils
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 379
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: apache2
Version: 2.4.25-3+deb9u13
Depends: libapr1 (>= 1.4.8-2~), libaprutil1 (>= 1.5.0), libc6 (>= 2.14), libssl1.0.2 (>= 1.0.2d)
Description: Apache HTTP Server (utility programs for web servers)
Provides some add-on programs useful for any web server. These include:
- ab (Apache benchmark tool)
- fcgistarter (Start a FastCGI program)
- logresolve (Resolve IP addresses to hostnames in logfiles)
- htpasswd (Manipulate basic authentication files)
- htdigest (Manipulate digest authentication files)
- htdbm (Manipulate basic authentication files in DBM format, using APR)
- htcacheclean (Clean up the disk cache)
- rotatelogs (Periodically stop writing to a logfile and open a new one)
- split-logfile (Split a single log including multiple vhosts)
- checkgid (Checks whether the caller can setgid to the specified group)
- check_forensic (Extract mod_log_forensic output from Apache log files)
- httxt2dbm (Generate dbm files for use with RewriteMap)
Homepage: http://httpd.apache.org/
Package: libcurl3-gnutls
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 629
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 7.52.1-5+deb9u16
Depends: libc6 (>= 2.17), libcomerr2 (>= 1.01), libgnutls30 (>= 3.5.6), libgssapi-krb5-2 (>= 1.14+dfsg), libidn2-0 (>= 0.6), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libldap-2.4-2 (>= 2.4.7), libnettle6, libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.13.0), librtmp1 (>= 2.4+20131018.git79459a2-3~), libssh2-1 (>= 1.7.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se
Package: mariadb-client-core-10.1
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 24734
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb-10.1
Version: 10.1.48-0+deb9u2
Replaces: mariadb-client-10.0 (<< 10.0.24-6~), mariadb-client-core-10.0, mariadb-client-core-5.5, mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, virtual-mysql-client-core
Provides: virtual-mysql-client-core
Depends: mariadb-common (>= 10.1.48-0+deb9u2), libaio1 (>= 0.3.93), libc6 (>= 2.17), libncurses5 (>= 6), libreadline5 (>= 5.2), libstdc++6 (>= 5.2), libtinfo5 (>= 6), zlib1g (>= 1:1.2.0)
Breaks: mariadb-client-10.0 (<< 10.0.24-6~), mariadb-client-core-10.0, mariadb-client-core-5.5, mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7
Conflicts: mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, virtual-mysql-client-core
Description: MariaDB database core client binaries
MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
server. SQL (Structured Query Language) is the most popular database query
language in the world. The main goals of MariaDB are speed, robustness and
ease of use.
.
This package includes the core client files, as used by Akonadi.
Homepage: https://mariadb.org/
Package: lsof
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 440
Maintainer: Norbert Tretkowski <nobse@debian.org>
Architecture: amd64
Version: 4.89+dfsg-0.1
Depends: libc6 (>= 2.14), libselinux1 (>= 1.32)
Suggests: perl
Description: Utility to list open files
Lsof is a Unix-specific diagnostic tool. Its name stands
for LiSt Open Files, and it does just that. It lists
information about any files that are open, by processes
currently running on the system.
Homepage: http://people.freebsd.org/~abe/
Package: libpsl5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 73
Maintainer: Tim Rühsen <tim.ruehsen@gmx.de>
Architecture: amd64
Multi-Arch: same
Source: libpsl
Version: 0.17.0-3
Depends: libidn2-0 (>= 0.16), libc6 (>= 2.4), libunistring0
Recommends: publicsuffix (>= 20150507)
Description: Library for Public Suffix List (shared libraries)
Libpsl allows checking domains against the Public Suffix List.
It can be used to avoid privacy-leaking 'super-cookies',
'super domain' certificates, for domain highlighting purposes
sorting domain lists by site and more.
.
Please see https://publicsuffix.org for more detailed information.
.
This package contains runtime libraries.
Homepage: https://github.com/rockdaboot/libpsl
Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 47
Maintainer: Debian Hostname Team <hostname-devel@lists.alioth.debian.org>
Architecture: amd64
Source: hostname (3.18)
Version: 3.18+b1
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
This package provides commands which can be used to display the system's
DNS name, and to display or set its hostname or NIS domain name.
Package: python-pyasn1
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 340
Maintainer: Jan Lübbe <jluebbe@debian.org>
Architecture: all
Source: pyasn1
Version: 0.1.9-2
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Suggests: doc-base
Description: ASN.1 library for Python (Python 2 module)
This is an implementation of ASN.1 types and codecs in Python
programming language. It has been first written to support particular
protocol (SNMP) but then generalized to be suitable for a wide range
of protocols based on ASN.1 specification.
.
This package contains the Python 2 module.
Homepage: http://pyasn1.sourceforge.net/
Package: grub-pc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 561
Maintainer: GRUB Maintainers <pkg-grub-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.02~beta3-5+deb9u2
Replaces: grub, grub-common (<= 1.97~beta2-1), grub-coreboot, grub-efi-amd64, grub-efi-ia32, grub-ieee1275, grub-legacy, grub2 (<< 2.02~beta3-5+deb9u2)
Depends: debconf (>= 0.5) | debconf-2.0, grub-common (= 2.02~beta3-5+deb9u2), grub2-common (= 2.02~beta3-5+deb9u2), grub-pc-bin (= 2.02~beta3-5+deb9u2), ucf
Pre-Depends: dpkg (>= 1.17.13)
Conflicts: grub (<< 0.97-54), grub-coreboot, grub-efi-amd64, grub-efi-ia32, grub-ieee1275, grub-legacy, grub-xen
Conffiles:
/etc/kernel/postinst.d/zz-update-grub 536d9d45e3e547638db3c5d58a925b6c
/etc/kernel/postrm.d/zz-update-grub 536d9d45e3e547638db3c5d58a925b6c
Description: GRand Unified Bootloader, version 2 (PC/BIOS version)
GRUB is a portable, powerful bootloader. This version of GRUB is based on a
cleaner design than its predecessors, and provides the following new features:
.
- Scripting in grub.cfg using BASH-like syntax.
- Support for modern partition maps such as GPT.
- Modular generation of grub.cfg via update-grub. Packages providing GRUB
add-ons can plug in their own script rules and trigger updates by invoking
update-grub.
- VESA-based graphical mode with background image support and complete 24-bit
color set.
- Support for extended charsets. Users can write UTF-8 text to their menu
entries.
.
This package contains a version of GRUB that has been built for use with
traditional PC/BIOS architecture.
Homepage: http://www.gnu.org/software/grub/
Package: multiarch-support
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 221
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.24-11+deb9u4
Depends: libc6 (>= 2.3.6-2)
Description: Transitional package to ensure multiarch compatibility
This is a transitional package used to ensure multiarch support is present
in ld.so before unpacking libraries to the multiarch directories. It can
be removed once nothing on the system depends on it.
Homepage: http://www.gnu.org/software/libc/libc.html
Package: tzdata
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 3036
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2021a-0+deb9u4
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-stretch
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
This package contains data required for the implementation of
standard local time for many representative locations around the
globe. It is updated periodically to reflect changes made by
political bodies to time zone boundaries, UTC offsets, and
daylight-saving rules.
Homepage: http://www.iana.org/time-zones
Package: python-zope.component
Status: install ok installed
Priority: extra
Section: zope
Installed-Size: 340
Maintainer: Debian/Ubuntu Zope Team <pkg-zope-developers@lists.alioth.debian.org>
Architecture: all
Source: zope.component
Version: 4.3.0-1
Provides: python-zope.component-hook
Depends: python-zope.hookable, python-zope.interface (>= 4.1.0), python-pkg-resources, python-zope.event, python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: Zope Component Architecture
The core of the Zope Component Architecture. Together with the zope.interface
package, it provides facilities for defining, registering and looking up
components.
.
This is the Python 2 version.
Homepage: http://pypi.python.org/pypi/zope.component
Package: init
Status: install ok installed
Priority: important
Section: metapackages
Installed-Size: 19
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: init-system-helpers
Version: 1.48
Depends: init-system-helpers (>= 1.25)
Pre-Depends: systemd-sysv | sysvinit-core
Description: metapackage ensuring an init system is installed
This package is a metapackage which allows you to select from the available
init systems while ensuring that one of these is available on the system at
all times.
Important: yes
Package: roundcube-plugins
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 4462
Maintainer: Debian Roundcube Maintainers <pkg-roundcube-maintainers@lists.alioth.debian.org>
Architecture: all
Source: roundcube
Version: 1.2.3+dfsg.1-4+deb9u10
Replaces: roundcube-plugins-extra (<= 0.7-20120110)
Depends: roundcube-core (= 1.2.3+dfsg.1-4+deb9u10)
Pre-Depends: dpkg (>= 1.17.14)
Suggests: php-crypt-gpg, php-net-sieve, php-zip
Breaks: roundcube-plugins-extra (<= 0.7-20120110)
Conffiles:
/etc/roundcube/plugins/acl/config.inc.php e7760a276e3a0997eb37f680e5599325
/etc/roundcube/plugins/additional_message_headers/config.inc.php 86a4bfea3488efc3d3383577e918781e
/etc/roundcube/plugins/database_attachments/config.inc.php bbdb581fd9f79bc99275d89917403ab5
/etc/roundcube/plugins/emoticons/config.inc.php d4723d06edd0b3a39ed8f36d63d8073a
/etc/roundcube/plugins/enigma/config.inc.php 3514d060664d62f4fc4d273254f334fc
/etc/roundcube/plugins/help/config.inc.php 01b1b92930de6b09ee985d9b438883b4
/etc/roundcube/plugins/http_authentication/config.inc.php 12f51f672436b884b00c9762b65cfe5b
/etc/roundcube/plugins/managesieve/config.inc.php 08f808c05c010e2e426cb5fe213b879c
/etc/roundcube/plugins/new_user_identity/config.inc.php de91026f76e0682b11025b960f396cba
/etc/roundcube/plugins/newmail_notifier/config.inc.php 02ff75471b31e8d3eaa3d3c7d06cf600
/etc/roundcube/plugins/password/config.inc.php 40aac7b93ca53d7dc060e6789dc1f23e
/etc/roundcube/plugins/squirrelmail_usercopy/config.inc.php 75c49d7d2714a7601d2a6001e15f3d82
/etc/roundcube/plugins/zipdownload/config.inc.php 832d5239f443098e5b3fd4a66ce36410
Description: skinnable AJAX based webmail solution for IMAP servers - plugins
RoundCube Webmail is a browser-based multilingual IMAP client with an
application-like user interface. It provides full functionality
expected from an e-mail client, including MIME support, address book,
folder manipulation and message filters.
.
The user interface is fully skinnable using XHTML and CSS 2.
.
This package provides several plugins for Roundcube. They should be
enabled in the configuration of Roundcube.
Homepage: https://www.roundcube.net/
Package: installation-report
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 43
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: all
Version: 2.62
Recommends: reportbug, pciutils
Description: system installation report
This package contains instructions and programs for reporting on
the installation of a new system. It can help you fill out an
installation report and send it to the Debian bug tracking system.
.
Purging this package will remove the logs of the system's installation.
Package: libklibc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 108
Maintainer: maximilian attems <maks@debian.org>
Architecture: amd64
Source: klibc
Version: 2.0.4-9+deb9u1
Description: minimal libc subset for use with initramfs
klibc is intended to be a minimalistic libc subset for use with
initramfs. It is deliberately written for small size, minimal
entanglement, and portability, not speed. It is definitely a work in
progress, and a lot of things are still missing.
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git
Package: systemd-sysv
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 108
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 232-25+deb9u14
Replaces: sysvinit (<< 2.88dsf-44~), sysvinit-core, upstart (<< 1.13.2-0ubuntu10~), upstart-sysv
Pre-Depends: systemd
Conflicts: file-rc, openrc (<< 0.20.4-2.1), sysvinit-core, upstart (<< 1.13.2-0ubuntu10~), upstart-sysv
Description: system and service manager - SysV links
systemd is a system and service manager for Linux. It provides aggressive
parallelization capabilities, uses socket and D-Bus activation for starting
services, offers on-demand starting of daemons, keeps track of processes using
Linux control groups, maintains mount and automount points and implements an
elaborate transactional dependency-based service control logic.
.
systemd is compatible with SysV and LSB init scripts and can work as a
drop-in replacement for sysvinit.
.
This package provides the manual pages and links needed for systemd
to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a
link to systemd.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Package: libcrypt-openssl-bignum-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 91
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 0.07-2
Depends: perl (>= 5.24.1~rc4-1), perl-openssl-abi-1.1, perlapi-5.24.1, libc6 (>= 2.4), libssl1.1 (>= 1.1.0)
Description: Perl module to access OpenSSL multiprecision integer arithmetic libraries
Presently, many though not all of the arithmetic operations that OpenSSL
provides are exposed to Perl via Crypt::OpenSSL::Bignum. In addition, this
module can be used to provide access to bignum values produced by other
OpenSSL modules, such as key parameters from Crypt::OpenSSL::RSA.
Homepage: http://perl-openssl.sourceforge.net/
Package: mawk
Status: install ok installed
Priority: required
Section: interpreters
Installed-Size: 183
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: mawk (1.3.3-17)
Version: 1.3.3-17+b3
Provides: awk
Pre-Depends: libc6 (>= 2.14)
Description: a pattern scanning and text processing language
Mawk is an interpreter for the AWK Programming Language. The AWK
language is useful for manipulation of data files, text retrieval and
processing, and for prototyping and experimenting with algorithms. Mawk
is a new awk meaning it implements the AWK language as defined in Aho,
Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
to the POSIX 1003.2 (draft 11.3) definition of the AWK language
which contains a few features not described in the AWK book, and mawk
provides a small number of extensions.
.
Mawk is smaller and much faster than gawk. It has some compile-time
limits such as NF = 32767 and sprintf buffer = 1020.
Package: libclamav7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2047
Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: clamav
Version: 0.100.3+dfsg-0+deb9u1
Depends: libbz2-1.0, libc6 (>= 2.15), libgcc1 (>= 1:3.0), libjson-c3 (>= 0.10), libllvm3.8 (>= 1:3.8.1-19~), libltdl7 (>= 2.4.6), libmspack0 (>= 0.4), libpcre3, libssl1.1 (>= 1.1.0), libstdc++6 (>= 5.2), libtfm1 (>= 0.13), libxml2 (>= 2.7.4), zlib1g (>= 1:1.2.3.4)
Suggests: libclamunrar7
Description: anti-virus utility for Unix - library
Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
this software is the integration with mail servers (attachment
scanning). The package provides a flexible and scalable
multi-threaded daemon in the clamav-daemon package, a command-line
scanner in the clamav package, and a tool for automatic updating via
the Internet in the clamav-freshclam package. The programs are based
on libclamav, which can be used by other software.
.
For programs written using the libclamav library. Libclamav may be used to add
virus protection into software. The library is thread-safe, and automatically
recognizes and scans archives. Scanning is very fast and most of the time
not noticeable.
Homepage: https://www.clamav.net/
Package: php-json-schema
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 129
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Version: 1.6.1-2
Depends: php-cli, php-common
Description: implementation of JSON schema
JSON Schema defines the media type "application/schema+json", a JSON
based format for defining the structure of JSON data. JSON Schema
provides a contract for what JSON data is required for a given
application and how to interact with it. JSON Schema is intended to
define validation, documentation, hyperlink navigation, and interaction
control of JSON data.
.
This package provides a PHP library for validating JSON Structures
against a given Schema.
Homepage: https://github.com/justinrainbow/json-schema
Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 230
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: amd64
Version: 1.6-5+deb9u1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.17)
Suggests: less
Description: GNU compression utilities
This package provides the standard GNU file compression utilities, which
are also the default compression tools for Debian. They typically operate
on files with names ending in '.gz', but can also decompress files ending
in '.Z' created with 'compress'.
Package: libelf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 935
Maintainer: Kurt Roeckx <kurt@roeckx.be>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.168-1+deb9u1
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Description: library to read and write ELF files
The libelf1 package provides a shared library which allows reading and
writing ELF files on a high level. Third party programs depend on
this package to read internals of ELF files. The programs of the
elfutils package use it also to generate new ELF files.
.
This library is part of elfutils.
Homepage: https://sourceware.org/elfutils/
Package: libubsan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 292
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.2.5), libgcc1 (>= 1:3.3), libstdc++6 (>= 4.1.1)
Description: UBSan -- undefined behaviour sanitizer (runtime)
UndefinedBehaviorSanitizer can be enabled via -fsanitize=undefined.
Various computations will be instrumented to detect undefined behavior
at runtime. Available for C and C++.
Homepage: http://gcc.gnu.org/
Package: postfix-mysql
Status: install ok installed
Priority: extra
Section: mail
Installed-Size: 369
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: amd64
Source: postfix
Version: 3.1.15-0+deb9u1
Replaces: postfix (<< 3.1.3-7~)
Depends: libc6 (>= 2.2.5), libmariadbclient18 (>= 10.1.44-0+deb9u1), postfix (= 3.1.15-0+deb9u1)
Breaks: postfix (<< 3.1.3-7~)
Conffiles:
/etc/postfix/postfix-files.d/mysql.files 84b9e06928e63d31c542cd09f4da1ef5
Description: MySQL map support for Postfix
Postfix is Wietse Venema's mail transport agent that started life as an
alternative to the widely-used Sendmail program. Postfix attempts to
be fast, easy to administer, and secure, while at the same time being
sendmail compatible enough to not upset existing users. Thus, the outside
has a sendmail-ish flavor, but the inside is completely different.
.
This provides support for MySQL maps in Postfix. If you plan to use MySQL
maps with Postfix, you need this.
Homepage: http://www.postfix.org
Package: rake
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 213
Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 10.5.0-2+deb9u1
Depends: ruby | ruby-interpreter
Recommends: zip
Description: ruby make-like utility
Rake is a simple ruby build program with capabilities similar to make.
.
Rake has the following features:
* Rakefiles (rakes version of Makefiles) are completely defined in
standard Ruby syntax. No XML files to edit. No quirky Makefile
syntax to worry about (is that a tab or a space?)
* Users can specify tasks with prerequisites.
* Rake supports rule patterns to sythesize implicit tasks.
* Rake is lightweight. It can be distributed with other
projects as a single file. Projects that depend upon
rake do not require that rake be installed on target
systems.
Homepage: https://github.com/jimweirich/rake
Ruby-Versions: all
Package: libtsan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 908
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.23), libgcc1 (>= 1:3.3), libstdc++6 (>= 4.1.1)
Description: ThreadSanitizer -- a Valgrind-based detector of data races (runtime)
ThreadSanitizer (Tsan) is a data race detector for C/C++ programs.
The Linux and Mac versions are based on Valgrind.
Homepage: http://gcc.gnu.org/
Package: libgfortran3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1240
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.17), libgcc1 (>= 1:4.3), libquadmath0 (>= 4.6)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: Runtime library for GNU Fortran applications
Library needed for GNU Fortran applications linked against the
shared library.
Homepage: http://gcc.gnu.org/
Package: groff-base
Status: install ok installed
Priority: important
Section: text
Installed-Size: 3261
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: groff
Version: 1.22.3-9
Replaces: groff (<< 1.20.1-6), jgroff (<< 1.17-1)
Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.0), libstdc++6 (>= 4.1.1)
Suggests: groff
Breaks: groff (<< 1.17-1), jgroff (<< 1.17-1), pmake (<< 1.45-7), troffcvt (<< 1.04-14)
Conffiles:
/etc/groff/man.local e6591616404c7c443f71ff21d27430d7
/etc/groff/mdoc.local 4bc6267468942826b757fa2f868c8237
Description: GNU troff text-formatting system (base system components)
This package contains the traditional UN*X text formatting tools
troff, nroff, tbl, eqn, and pic. These utilities, together with the
man-db package, are essential for displaying the on-line manual pages.
.
groff-base is a stripped-down package containing the necessary components
to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript
device (groff's default). Users who want a full groff installation, with
the standard set of devices, fonts, macros, and documentation, should
install the groff package.
Homepage: https://www.gnu.org/software/groff/
Package: quota
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1485
Maintainer: Michael Meskes <meskes@debian.org>
Architecture: amd64
Version: 4.03-2+deb9u1
Depends: e2fslibs (>= 1.37), libc6 (>= 2.7), libcomerr2 (>= 1.01), libdbus-1-3 (>= 1.9.14), libldap-2.4-2 (>= 2.4.7), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7), libtirpc1, libwrap0 (>= 7.6-4~), debconf (>= 1.2.9) | debconf-2.0, init-system-helpers (>= 1.18~), lsb-base (>= 3.2-13)
Suggests: libnet-ldap-perl, rpcbind, default-mta | mail-transport-agent
Conffiles:
/etc/cron.daily/quota 9dbc1b48f4cf43e1c6fb3b54d3e1ebe6
/etc/default/quota 0dd01986a1b7fa36e5686fb04229335d
/etc/init.d/quota 58893fd94e8131fda9cdeb55bd546ace
/etc/init.d/quotarpc b55c0ee510b092d1fcb9ed918a8de9c2
/etc/quotagrpadmins 0b4a5484e590fea00f9949d6e298a659
/etc/quotatab a930a2a1992adf72a6d7e50267e674e4
/etc/warnquota.conf 30a0b7cc5463fa9f39388ebb00ffa82d
Description: disk quota management tools
This package provides the standard set of utilities for manipulating
file system usage caps via the Linux Diskquota system. It can set hard
or soft limits with adjustable grace periods on block or inode usage for
users and groups. It allows users to check their quota status,
integrates with LDAP, and supports quotas on remote machines via NFS.
Homepage: http://sourceforge.net/projects/linuxquota
Package: libglib2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 5000
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glib2.0
Version: 2.50.3-2+deb9u3
Depends: libc6 (>= 2.17), libffi6 (>= 3.0.4), libmount1 (>= 2.20.1), libpcre3, libselinux1 (>= 1.32), zlib1g (>= 1:1.2.2)
Recommends: libglib2.0-data, shared-mime-info, xdg-user-dirs
Breaks: glib-networking (<< 2.33.12), libgnome-desktop-3-2 (<< 3.4.2-2), python-gi (<< 3.7.2)
Description: GLib library of C routines
GLib is a library containing many useful C routines for things such
as trees, hashes, lists, and strings. It is a useful general-purpose
C library used by projects such as GTK+, GIMP, and GNOME.
.
This package contains the shared libraries.
Homepage: http://www.gtk.org/
Package: mysql-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 28
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: mysql-defaults (1.0.2)
Version: 5.8+1.0.2
Replaces: mariadb-server-5.5, mysql-common-5.6, mysql-server-5.5, percona-xtradb-cluster-common-5.5
Provides: mysql-common-5.6
Breaks: mariadb-common (<< 10.0.20-3~)
Conflicts: mariadb-server-5.5, mysql-common-5.6, mysql-server-5.5, percona-xtradb-cluster-common-5.5
Conffiles:
/etc/mysql/conf.d/mysql.cnf 61e0993270966cc6bc96b46c01ade21f
/etc/mysql/conf.d/mysqldump.cnf 20890decb4486ce539753193908fb356
/etc/mysql/my.cnf.fallback cfe2bc1819d5e200eca8ca6912f714af
Description: MySQL database common files, e.g. /etc/mysql/my.cnf
MySQL is a fast, stable and true multi-user, multi-threaded SQL database
server. SQL (Structured Query Language) is the most popular database query
language in the world. The main goals of MySQL are speed, robustness and
ease of use.
.
This package includes files needed by all versions of the client library,
e.g. /etc/mysql/my.cnf.
Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 721
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.1.18-8~deb9u4
Replaces: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1)
Depends: libbz2-1.0, libc6 (>= 2.14), libgcrypt20 (>= 1.7.0), libgpg-error0 (>= 1.14), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Breaks: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1), python-debian (<< 0.1.29)
Description: GNU privacy guard - signature verification tool
GnuPG is GNU's tool for secure communication and data storage.
.
gpgv is actually a stripped-down version of gpg which is only able
to check signatures. It is somewhat smaller than the fully-blown gpg
and uses a different (and simpler) way to check that the public keys
used to make the signature are valid. There are no configuration
files and only a few options are implemented.
Homepage: https://www.gnupg.org/
Package: emacsen-common
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 136
Maintainer: Rob Browning <rlb@defaultvalue.org>
Architecture: all
Version: 2.0.8
Conffiles:
/etc/emacs/site-start.d/00debian-vars.el 01f95c4c108d6b5f20b31f0e9c2c6956
/etc/emacs/site-start.el 4198e6146b40acad33d18f049a84dd24
Description: Common facilities for all emacsen
This package contains code that is needed by all the (x)emacs
packages. It will be automatically installed when needed.
Package: libpython3.5-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 9908
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.5
Version: 3.5.3-1+deb9u5
Depends: libpython3.5-minimal (= 3.5.3-1+deb9u5), mime-support, libbz2-1.0, libc6 (>= 2.15), libdb5.3, liblzma5 (>= 5.1.1alpha+20120614), libmpdec2, libncursesw5 (>= 6), libreadline7 (>= 7.0~beta), libsqlite3-0 (>= 3.5.9), libtinfo5 (>= 6)
Breaks: libmpdec2 (<< 2.4.2)
Description: Interactive high-level object-oriented language (standard library, version 3.5)
Python is a high-level, interactive, object-oriented language. Its 3.5 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains Python 3.5's standard library. It is normally not
used on its own, but as a dependency of python3.5.
Package: libcap2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 47
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1:2.25-1
Depends: libc6 (>= 2.14)
Description: POSIX 1003.1e capabilities (library)
Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
available in Linux kernels. These capabilities are a partitioning of the all
powerful root privilege into a set of distinct privileges.
.
This package contains the shared library.
Homepage: http://sites.google.com/site/fullycapable/
Package: libio-html-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 40
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.001-1
Depends: perl
Description: open an HTML file with automatic charset detection
IO::HTML provides an easy way to open a file containing HTML while
automatically determining its encoding. It uses the HTML5 encoding
sniffing algorithm specified in section 8.2.2.1 of the draft standard.
Homepage: http://search.cpan.org/dist/IO-HTML/
Package: python3-idna
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 271
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: python-idna
Version: 2.2-1
Depends: python3:any (>= 3.3.2-2~)
Description: Python IDNA2008 (RFC 5891) handling (Python 3)
A library to support the Internationalised Domain Names in Applications (IDNA)
protocol as specified in RFC 5891. This version of the protocol is often
referred to as “IDNA2008” and can produce different results from the earlier
standard from 2003.
.
The library is also intended to act as a suitable drop-in replacement for the
“encodings.idna” module that comes with the Python standard library but
currently only supports the older 2003 specification.
.
This package contains the module for Python 3.
Homepage: https://github.com/kjd/idna
Package: libisccfg140
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 352
Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u12
Replaces: libbind0
Depends: libc6 (>= 2.4), libcap2 (>= 1:2.10), libcomerr2 (>= 1.01), libdns162, libgeoip1, libgssapi-krb5-2 (>= 1.6.dfsg.2), libisc160, libisccc140, libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libssl1.0.2 (>= 1.0.2d), libxml2 (>= 2.6.27)
Conflicts: libbind0, libbind9-41
Description: Config File Handling Library used by BIND
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the libisccfg shared library used by BIND's daemons
and clients to read and write ISC-style configuration files like named.conf
and rndc.conf.
Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 238
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.29.2-1+deb9u1)
Version: 1:2.29.2-1+deb9u1
Replaces: bash-completion (<< 1:2.1-4.1~)
Pre-Depends: libc6 (>= 2.16), libsystemd0
Recommends: bsdmainutils
Breaks: bash-completion (<< 1:2.1-4.1~)
Description: basic utilities from 4.4BSD-Lite
This package contains the bare minimum of BSD utilities needed for a
Debian system: logger, renice, script, scriptreplay, and wall. The
remaining standard BSD utilities are provided by bsdmainutils.
Package: mariadb-client
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 62
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: all
Source: mariadb-10.1
Version: 10.1.26-0+deb9u1
Depends: mariadb-client-10.1 (>= 10.1.26-0+deb9u1)
Description: MariaDB database client (metapackage depending on the latest version)
This is an empty package that depends on the current "best" version of
mariadb-client (currently mariadb-client-10.0), as determined by the MariaDB
maintainers. Install this package if in doubt about which MariaDB version
you want, as this is the one considered to be in the best shape.
Homepage: https://mariadb.org/
Package: whiptail
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 69
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: newt (0.52.19-1)
Version: 0.52.19-1+b1
Depends: libc6 (>= 2.14), libnewt0.52, libpopt0 (>= 1.14), libslang2 (>= 2.2.4)
Description: Displays user-friendly dialog boxes from shell scripts
Whiptail is a "dialog" replacement using newt instead of ncurses. It
provides a method of displaying several different types of dialog boxes
from shell scripts. This allows a developer of a script to interact with
the user in a much friendlier manner.
Homepage: https://fedorahosted.org/newt/
Package: python3-json-pointer
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 43
Maintainer: PKG OpenStack <openstack-devel@lists.alioth.debian.org>
Architecture: all
Source: python-json-pointer
Version: 1.10-1
Depends: python3:any (>= 3.3.2-2~)
Description: resolve JSON pointers - Python 3.x
Python-json-pointer is a small library to resolve JSON pointers according to
the IETF draft specification. JSON Pointer defines a string syntax for
identifying a specific value within a JavaScript Object Notation (JSON)
document.
.
This package provides the module for Python 3.x.
Homepage: https://github.com/stefankoegl/python-json-pointer
Package: rkhunter
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 984
Maintainer: Debian Forensics <forensics-devel@lists.alioth.debian.org>
Architecture: all
Version: 1.4.2-6+deb9u1
Depends: binutils, file, lsof, net-tools, ucf (>= 0.28), perl:any
Pre-Depends: debconf (>= 0.5) | debconf-2.0
Recommends: bsd-mailx | mailutils | heirloom-mailx | mailx, default-mta | mail-transport-agent, iproute2, unhide, unhide.rb, wget | curl
Suggests: liburi-perl, libwww-perl, powermgmt-base
Conffiles:
/etc/apt/apt.conf.d/90rkhunter 662539eb1caa197e3cb9063186d207f4
/etc/cron.daily/rkhunter 00dd0b4e9f838e2739c0fa2d8858756b
/etc/cron.weekly/rkhunter 13da7eccf59ff1011d47bf854cb8334c
/etc/logcheck/ignore.d.server/rkhunter 40022d28d0189cdd2a364607ee0b0e4d
/etc/logrotate.d/rkhunter c16a2282b8a5f0788678de0a1b2943c9
/etc/rkhunter.conf d1afcf63496d5ff36ad9651f02638a37
Description: rootkit, backdoor, sniffer and exploit scanner
Rootkit Hunter scans systems for known and unknown rootkits,
backdoors, sniffers and exploits.
.
It checks for:
- SHA256 hash changes;
- files commonly created by rootkits;
- executables with anomalous file permissions;
- suspicious strings in kernel modules;
- hidden files in system directories;
and can optionally scan within files.
.
Using rkhunter alone does not guarantee that a system is not
compromised. Running additional tests, such as chkrootkit, is
recommended.
Homepage: http://rkhunter.sourceforge.net
Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 204
Maintainer: Gerrit Pape <pape@smarden.org>
Architecture: amd64
Version: 0.5.8-2.4
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.14)
Description: POSIX-compliant shell
The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
from ash.
.
Since it executes scripts faster than bash, and has fewer library
dependencies (making it more robust against software or hardware
failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/
Package: libfuse2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 341
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: fuse
Version: 2.9.7-1+deb9u2
Depends: libc6 (>= 2.17)
Suggests: fuse
Conflicts: fuse (<< 2.9.7-1+deb9u2)
Description: Filesystem in Userspace (library)
Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
export a virtual filesystem to the Linux kernel. It also aims to provide a
secure method for non privileged users to create and mount their own filesystem
implementations.
.
This package contains the shared library.
Homepage: https://github.com/libfuse/libfuse/wiki
Package: xkb-data
Status: install ok installed
Priority: extra
Section: x11
Installed-Size: 5774
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: xkeyboard-config
Version: 2.19-1+deb9u1
Breaks: libx11-6 (<< 2:1.4.3)
Description: X Keyboard Extension (XKB) configuration data
This package contains configuration data used by the X Keyboard
Extension (XKB), which allows selection of keyboard layouts when
using a graphical interface.
.
Every X11 vendor provides its own XKB data files, so keyboard layout
designers have to send their layouts to several places. The
xkeyboard-config project has been launched at FreeDesktop in order
to provide a central repository that could be used by all vendors.
Homepage: https://www.freedesktop.org/Software/XKeyboardConfig
Package: gcc-6-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 209
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Breaks: gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
This package contains files common to all languages and libraries
contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Package: libsasl2-modules-db
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 97
Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27~101-g0780600+dfsg-3+deb9u2
Depends: libc6 (>= 2.14), libdb5.3
Description: Cyrus SASL - pluggable authentication modules (DB)
This is the Cyrus SASL API implementation, version 2.1. See package
libsasl2-2 and RFC 2222 for more information.
.
This package provides the DB plugin, which supports Berkeley DB lookups.
Homepage: https://www.cyrusimap.org/
Package: liblogging-stdlog0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 38
Maintainer: Michael Biebl <biebl@debian.org>
Architecture: amd64
Multi-Arch: same
Source: liblogging (1.0.5-2)
Version: 1.0.5-2+b2
Depends: libc6 (>= 2.4)
Description: easy to use and lightweight logging library
Liblogging consists of several components with stdlog being the core
component. Think of liblogging-stdlog as the next version of the
syslog(3) API. It retains the simple semantics, but makes the API more
sophisticated "behind the scenes" with better support for multiple
threads and flexibility for different log destinations.
.
This package contains the shared library.
Homepage: http://www.liblogging.org/
Package: liblwp-protocol-https-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 56
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.06-2
Replaces: libwww-perl (<< 6.02)
Depends: perl, ca-certificates, libio-socket-ssl-perl (>= 1.54), libnet-http-perl, libwww-perl (>= 6.05-2)
Suggests: libcrypt-ssleay-perl
Breaks: libwww-perl (<< 6.02)
Description: HTTPS driver for LWP::UserAgent
The LWP::Protocol::https module provides support for using HTTPS schemed URLs
with LWP. LWP::Protocol::https is a plug-in to the LWP protocol handling, so
you don't use it directly. Once the module is installed LWP is able to access
sites using HTTP over SSL/TLS.
.
If hostname verification is requested by LWP::UserAgent's ssl_opts, and
neither SSL_ca_file nor SSL_ca_path is set, then SSL_ca_file is implied to be
the one provided by ca-certificates.
.
This module used to be bundled with libwww-perl, but it was unbundled in
v6.02 in order to be able to declare its dependencies properly for the CPAN
tool-chain. Applications that need HTTPS support can just declare their
dependency on LWP::Protocol::https and will no longer need to know what
underlying modules to install.
Homepage: https://metacpan.org/release/LWP-Protocol-https
Package: linux-base
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 61
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 4.5
Depends: debconf (>= 0.5) | debconf-2.0
Description: Linux image base package
This package contains files and support scripts for all Linux
images.
Package: python3-six
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 56
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: all
Multi-Arch: foreign
Source: six
Version: 1.10.0-3
Depends: python3:any (>= 3.4~)
Description: Python 2 and 3 compatibility library (Python 3 interface)
Six is a Python 2 and 3 compatibility library. It provides utility
functions for smoothing over the differences between the Python versions
with the goal of writing Python code that is compatible on both Python
versions.
.
This package provides Six on the Python 3 module path. It is complemented
by python-six and pypy-six.
Homepage: https://pythonhosted.org/six/
Package: python-tz
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 124
Maintainer: Debian/Ubuntu Zope Team <pkg-zope-developers@lists.alioth.debian.org>
Architecture: all
Version: 2016.7-0.3
Depends: tzdata, python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: Python version of the Olson timezone database
python-tz brings the Olson tz database into Python. This library allows
accurate and cross platform timezone calculations using Python 2.3 or higher.
It also solves the issue of ambiguous times at the end of daylight savings,
which you can read more about in the Python Library Reference
(datetime.tzinfo).
Homepage: http://pypi.python.org/pypi/pytz/
Package: gnupg
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2093
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.1.18-8~deb9u4
Replaces: gnupg2 (<< 2.1.11-7+exp1)
Provides: gpg
Depends: gnupg-agent (= 2.1.18-8~deb9u4), libassuan0 (>= 2.0.1), libbz2-1.0, libc6 (>= 2.15), libgcrypt20 (>= 1.7.0), libgpg-error0 (>= 1.14), libksba8 (>= 1.3.4), libreadline7 (>= 6.0), libsqlite3-0 (>= 3.7.15), zlib1g (>= 1:1.1.4)
Recommends: dirmngr (= 2.1.18-8~deb9u4), gnupg-l10n (= 2.1.18-8~deb9u4)
Suggests: parcimonie, xloadimage
Breaks: debsig-verify (<< 0.15), dirmngr (<< 2.1.18-8~deb9u4), gnupg2 (<< 2.1.11-7+exp1), libgnupg-interface-perl (<< 0.52-3), libgnupg-perl (<= 0.19-1), libmail-gnupg-perl (<= 0.22-1), monkeysphere (<< 0.38~), php-crypt-gpg (<= 1.4.1-1), python-apt (<= 1.1.0~beta4), python-gnupg (<< 0.3.8-3), python3-apt (<= 1.1.0~beta4)
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC4880.
.
This package contains /usr/bin/gpg and some helper utilities like
gpgconf and kbxutil.
Homepage: https://www.gnupg.org/
Package: bind9
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1781
Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Architecture: amd64
Version: 1:9.10.3.dfsg.P4-12.3+deb9u12
Replaces: apparmor-profiles (<< 2.1+1075-0ubuntu4), bind, bind9utils (<< 1:9.9.3.dfsg.P2-3), dnsutils (<< 1:9.1.0-3)
Depends: libbind9-140 (= 1:9.10.3.dfsg.P4-12.3+deb9u12), libc6 (>= 2.14), libcap2 (>= 1:2.10), libcomerr2 (>= 1.01), libdns162 (= 1:9.10.3.dfsg.P4-12.3+deb9u12), libgeoip1, libgssapi-krb5-2 (>= 1.6.dfsg.2), libirs141, libisc160 (= 1:9.10.3.dfsg.P4-12.3+deb9u12), libisccc140 (= 1:9.10.3.dfsg.P4-12.3+deb9u12), libisccfg140 (= 1:9.10.3.dfsg.P4-12.3+deb9u12), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), liblwres141 (= 1:9.10.3.dfsg.P4-12.3+deb9u12), libssl1.0.2 (>= 1.0.2d), libxml2 (>= 2.7.4), debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), netbase, adduser, lsb-base (>= 3.2-14), bind9utils (= 1:9.10.3.dfsg.P4-12.3+deb9u12), net-tools
Suggests: dnsutils, bind9-doc, resolvconf, ufw
Conflicts: apparmor-profiles (<< 2.1+1075-0ubuntu4), bind
Conffiles:
/etc/apparmor.d/local/usr.sbin.named 46622a9a6a8abf650eed70019af3cfd4
/etc/apparmor.d/usr.sbin.named f631c4a2c2753d48348a9edda3b870aa
/etc/bind/bind.keys db02e1b815725c6f0ec28852a3eada15
/etc/bind/db.0 8aba258068c8c60a7ade3952a285f57d
/etc/bind/db.127 64f5cf50e8d8192109dad43b779e5e36
/etc/bind/db.255 8aba258068c8c60a7ade3952a285f57d
/etc/bind/db.empty 4e7a0ebff9a8936e5a72ec18c0c49214
/etc/bind/db.local e5d27ead2d238928a08d33c7a7333477
/etc/bind/db.root a2f9c2f0d927684dbfc0e659dd1a5d25
/etc/bind/named.conf 32be43ecfcb37f69bf967c15c368e184
/etc/bind/named.conf.default-zones cf3c6c70e70516e6b3af112dd0a1907c
/etc/bind/named.conf.local fb15a27656eafd86ff870effabc72f1e
/etc/bind/zones.rfc1918 d04252b4368b66e28376f92613842888
/etc/init.d/bind9 50383513c5543a5fc98b47e9f6a719d5
/etc/network/if-down.d/bind9 933452a1de5a0f771dfd2040ae3c48ef
/etc/network/if-up.d/bind9 1f72d6273cb935cd15f0dc4cfcbe50ac
/etc/ppp/ip-down.d/bind9 933452a1de5a0f771dfd2040ae3c48ef
/etc/ppp/ip-up.d/bind9 1f72d6273cb935cd15f0dc4cfcbe50ac
/etc/ufw/applications.d/bind9 ac2316819866611a68b976db9125c9a7
Description: Internet Domain Name Server
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package provides the server and related configuration files.
Package: unzip
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 546
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 6.0-21+deb9u2
Depends: libbz2-1.0, libc6 (>= 2.14)
Suggests: zip
Description: De-archiver for .zip files
InfoZIP's unzip program. With the exception of multi-volume archives
(ie, .ZIP files that are split across several disks using PKZIP's /& option),
this can handle any file produced either by PKZIP, or the corresponding
InfoZIP zip program.
.
This version supports encryption.
Homepage: http://www.info-zip.org/UnZip.html
Package: linux-libc-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 4900
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: linux
Version: 4.9.320-2
Provides: linux-kernel-headers
Description: Linux support headers for userspace development
This package provides userspaces headers from the Linux kernel. These
headers are used by the installed headers for GNU libc and other system
libraries.
Homepage: https://www.kernel.org/
Package: spamassassin
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 3966
Maintainer: Noah Meyerhans <noahm@debian.org>
Architecture: all
Version: 3.4.2-1~deb9u4
Provides: libmail-spamassassin-perl
Depends: perl, libhtml-parser-perl, libsocket6-perl, adduser, libsys-hostname-long-perl, libarchive-tar-perl, libnet-dns-perl, libnetaddr-ip-perl, libhttp-date-perl, libmail-dkim-perl, lsb-base (>= 3.0-6), libwww-perl | curl | w3m, init-system-helpers (>= 1.18~)
Recommends: spamc, sa-compile, libmail-spf-perl, libsys-syslog-perl, gnupg, libio-socket-inet6-perl
Suggests: razor, libio-socket-ssl-perl, libdbi-perl, pyzor, libcompress-zlib-perl, libencode-detect-perl, libgeo-ip-perl, libnet-patricia-perl, libbsd-resource-perl
Conffiles:
/etc/cron.daily/spamassassin 8494d7267ee4ecd286142d15cea74115
/etc/default/spamassassin c80ea6518beb6f2c4f20f42ab68e4a8c
/etc/init.d/spamassassin 9474b386a3c80eff0bfb68d1f6ca4ebb
/etc/spamassassin/65_debian.cf e8330ff50b858cd750053c8b8677b967
/etc/spamassassin/init.pre 4bec504033006c1dcd22678abe2c692c
/etc/spamassassin/local.cf 72816d40ade485c217844135a4e2959e
/etc/spamassassin/v310.pre aa1be57835e2f11c2bb6cc5f404c8565
/etc/spamassassin/v312.pre 6548a6c4c83f909a3cca3746a8601ad2
/etc/spamassassin/v320.pre 0ad5c795a4d0fa8dc5d788b654601ab6
/etc/spamassassin/v330.pre 40fb32218509c7f3d00e75033060d082
/etc/spamassassin/v340.pre 329b5856a4378bb9364add9cabd949de
/etc/spamassassin/v341.pre be7e9c0873420c6be7cc0b44b386c38c
/etc/spamassassin/v342.pre c3f1c9fcd29e1e8ed75dc829099ed2d4
Description: Perl-based spam filter using text analysis
SpamAssassin is a very powerful and fully configurable spam filter
with numerous features including automatic white-listing, RBL
testing, Bayesian analysis, header and body text analysis. It is
designed to be called from a user's .procmail or .forward file, but
can also be integrated into a Mail Transport Agent (MTA).
.
Included in this package is a daemonized form of spamassassin (spamd)
which communicates with its client (spamc) via TCP, to reduce the
overhead of loading perl with each message. To take advantage of
this, you must install the spamc package.
Homepage: https://www.spamassassin.org/
Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 444
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.29.2-1+deb9u1
Replaces: bash-completion (<< 1:2.1-4.3~)
Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libmount1 (>= 2.25), libselinux1 (>= 2.6-3~), libsmartcols1 (>= 2.28~rc1), libudev1 (>= 183)
Suggests: nfs-common (>= 1:1.1.0-13)
Breaks: bash-completion (<< 1:2.1-4.3~)
Description: tools for mounting and manipulating filesystems
This package provides the mount(8), umount(8), swapon(8),
swapoff(8), and losetup(8) commands.
Package: iamerican
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 203
Maintainer: Robert Luberda <robert@debian.org>
Architecture: all
Source: ispell
Version: 3.4.00-5
Provides: ispell-dictionary
Depends: ienglish-common (= 3.4.00-5), dictionaries-common (>= 1.23~), ispell, debconf (>= 0.5) | debconf-2.0
Suggests: wamerican
Description: American English dictionary for ispell (standard version)
This package provides the standard, medium-sized American English dictionary,
based on the americanmed+ dictionary supplied with the source for ispell,
with additional words added from the more comprehensive wamerican word
list package.
.
There are also -small, -large, -huge, and -insane versions of this dictionary,
and there are ibritish* packages as well.
.
The package also suggests wamerican because ispell's (L)ookup command
needs a word list.
Homepage: http://www.lasr.cs.ucla.edu/geoff/ispell.html
Package: libgnutls30
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 2429
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.5.8-5+deb9u6
Depends: libc6 (>= 2.22), libgmp10 (>= 2:6), libhogweed4, libidn11 (>= 1.13), libnettle6, libp11-kit0 (>= 0.23.1), libtasn1-6 (>= 4.9), zlib1g (>= 1:1.1.4)
Suggests: gnutls-bin
Description: GNU TLS library - main runtime library
GnuTLS is a portable library which implements the Transport Layer
Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 and Datagram
Transport Layer Security (DTLS 1.0, 1.2) protocols.
.
GnuTLS features support for:
- TLS extensions: server name indication, max record size, opaque PRF
input, etc.
- authentication using the SRP protocol.
- authentication using both X.509 certificates and OpenPGP keys.
- TLS Pre-Shared-Keys (PSK) extension.
- Inner Application (TLS/IA) extension.
- X.509 and OpenPGP certificate handling.
- X.509 Proxy Certificates (RFC 3820).
- all the strong encryption algorithms (including SHA-256/384/512 and
Camellia (RFC 4132)).
.
This package contains the main runtime library.
Homepage: http://www.gnutls.org/
Package: libx11-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1548
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.6.4-3+deb9u4
Depends: libc6 (>= 2.15), libxcb1 (>= 1.11.1), libx11-data
Description: X11 client-side library
This package provides a client interface to the X Window System, otherwise
known as 'Xlib'. It provides a complete API for the basic functions of the
window system.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libX11
Package: libsasl2-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 184
Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27~101-g0780600+dfsg-3+deb9u2
Replaces: libsasl2
Depends: libsasl2-modules-db (>= 2.1.27~101-g0780600+dfsg-3+deb9u2), libc6 (>= 2.15)
Recommends: libsasl2-modules (>= 2.1.27~101-g0780600+dfsg-3+deb9u2)
Breaks: postfix (<= 2.8.3-1), slapd (<= 2.4.25-3)
Description: Cyrus SASL - authentication abstraction library
This is the Cyrus SASL API implementation, version 2.1.
.
SASL is the Simple Authentication and Security Layer, a method for
adding authentication support to connection-based protocols. To use
SASL, a protocol includes a command for identifying and
authenticating a user to a server and for optionally negotiating
protection of subsequent protocol interactions. If its use is
negotiated, a security layer is inserted between the protocol and the
connection. See RFC 2222 for more information.
.
Any of: ANONYMOUS, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal
Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used.
Homepage: https://www.cyrusimap.org/
Package: apache2-bin
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 4080
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Source: apache2
Version: 2.4.25-3+deb9u13
Provides: apache2-api-20120211
Depends: libapr1 (>= 1.5.0), libaprutil1 (>= 1.5.0), libaprutil1-dbd-sqlite3 | libaprutil1-dbd-mysql | libaprutil1-dbd-odbc | libaprutil1-dbd-pgsql | libaprutil1-dbd-freetds, libaprutil1-ldap, libc6 (>= 2.14), libldap-2.4-2 (>= 2.4.7), liblua5.2-0, libnghttp2-14 (>= 1.14.0), libpcre3, libssl1.0.2 (>= 1.0.2d), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4), perl:any
Suggests: www-browser, apache2-doc, apache2-suexec-pristine | apache2-suexec-custom
Description: Apache HTTP Server (modules and other binary files)
The Apache HTTP Server Project's goal is to build a secure, efficient and
extensible HTTP server as standards-compliant open source software. The
result has long been the number one web server on the Internet.
.
This package contains the binaries only and does not set up a working
web-server instance. Install the "apache2" package to get a fully working
instance.
Homepage: http://httpd.apache.org/
Package: libsystemd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 655
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 232-25+deb9u14
Pre-Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.7.0), liblz4-1 (>= 0.0~r113), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 2.1.9)
Description: systemd utility library
The libsystemd0 library provides interfaces to various systemd components.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Package: genisoimage
Status: install ok installed
Priority: optional
Section: otherosfs
Installed-Size: 1616
Maintainer: Joerg Jaspert <joerg@debian.org>
Architecture: amd64
Source: cdrkit (9:1.1.11-3)
Version: 9:1.1.11-3+b2
Replaces: mkisofs (<< 9:1.0)
Depends: libbz2-1.0, libc6 (>= 2.14), libmagic1 (>= 5.12), zlib1g (>= 1:1.1.4)
Suggests: wodim, cdrkit-doc
Conflicts: mkhybrid, mkisofs (<< 9:1.0)
Description: Creates ISO-9660 CD-ROM filesystem images
genisoimage is a pre-mastering program for creating ISO-9660 CD-ROM
filesystem images, which can then be written to CD or DVD media using
the wodim program. genisoimage includes support for making bootable
"El Torito" CDs, as well as CDs with support for the
Macintosh HFS filesystem.
.
The package also includes extra tools useful for working with ISO images:
* mkzftree - create ISO-9660 image with compressed contents
* dirsplit - easily separate large directory contents into disks of
predefined size
* geteltorito - extract an El Torito boot image from a CD image
.
Please install cdrkit-doc if you want most of the documentation and
README files.
Package: libdns-export162
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2120
Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Architecture: amd64
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u12
Depends: libc6 (>= 2.14), libisc-export160, libssl1.0.2 (>= 1.0.2d)
Description: Exported DNS Shared Library
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the exported libdns shared library.
Package: apache2-suexec-pristine
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 193
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Source: apache2
Version: 2.4.25-3+deb9u13
Provides: apache2-suexec
Depends: libc6 (>= 2.4), apache2-bin
Description: Apache HTTP Server standard suexec program for mod_suexec
Provides the standard suexec helper program for mod_suexec. This version is
compiled with document root /var/www and userdir suffix public_html. If you
need different settings, use the package apache2-suexec-custom.
Homepage: http://httpd.apache.org/
Package: libdpkg-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 2278
Origin: debian
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: all
Multi-Arch: foreign
Source: dpkg
Version: 1.18.26
Depends: perl, dpkg (>= 1.18.11)
Recommends: libfile-fcntllock-perl, liblocale-gettext-perl, bzip2, xz-utils
Suggests: debian-keyring, gnupg | gnupg2, gpgv | gpgv2, gcc | c-compiler, binutils, patch
Breaks: patch (<< 2.7)
Description: Dpkg perl modules
This package provides the perl modules used by the scripts
in dpkg-dev. They cover a wide range of functionality. Among them
there are the following public modules:
.
- Dpkg: core variables
- Dpkg::Arch: architecture handling functions
- Dpkg::Build::Info: build information functions
- Dpkg::BuildFlags: set, modify and query compilation build flags
- Dpkg::BuildOptions: parse and manipulate DEB_BUILD_OPTIONS
- Dpkg::BuildProfile: parse and manipulate build profiles
- Dpkg::Changelog: parse changelogs
- Dpkg::Changelog::Entry: represents a changelog entry
- Dpkg::Changelog::Parse: generic changelog parser for dpkg-parsechangelog
- Dpkg::Checksums: generate and parse checksums
- Dpkg::Compression: simple database of available compression methods
- Dpkg::Compression::Process: wrapper around compression tools
- Dpkg::Compression::FileHandle: transparently (de)compress files
- Dpkg::Conf: parse dpkg configuration files
- Dpkg::Control: parse and manipulate Debian control information
(.dsc, .changes, Packages/Sources entries, etc.)
- Dpkg::Control::Changelog: represent fields output by dpkg-parsechangelog
- Dpkg::Control::Fields: manage (list of known) control fields
- Dpkg::Control::Hash: parse and manipulate a block of RFC822-like fields
- Dpkg::Control::Info: parse files like debian/control
- Dpkg::Control::Tests: parse files like debian/tests/control
- Dpkg::Deps: parse and manipulate dependencies
- Dpkg::Exit: push, pop and run exit handlers
- Dpkg::Gettext: wrapper around Locale::gettext
- Dpkg::IPC: spawn sub-processes and feed/retrieve data
- Dpkg::Index: collections of Dpkg::Control (Packages/Sources files for
example)
- Dpkg::Interface::Storable: base object serializer
- Dpkg::Path: common path handling functions
- Dpkg::Source::Package: extract Debian source packages
- Dpkg::Substvars: substitute variables in strings
- Dpkg::Vendor: identify current distribution vendor
- Dpkg::Version: parse and manipulate Debian package versions
.
All the packages listed in Suggests or Recommends are used by some of the
modules.
Homepage: https://wiki.debian.org/Teams/Dpkg
Package: nomarch
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 40
Maintainer: Matthew Grant <matthewgrant5@gmail.com>
Architecture: amd64
Source: nomarch (1.4-3)
Version: 1.4-3+b2
Depends: libc6 (>= 2.3)
Description: Unpacks .ARC and .ARK MS-DOS archives
This is a de-archiving only replacement for the arc archiver from SEA. It
can handle pkarc archives, as well as others. It can also be used with
emacs - see the nomarch manpage.
.
This package is very useful for E-Mail virus scanner scripts for attachement
unpacking.
Package: ntp
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1804
Maintainer: Debian NTP Team <pkg-ntp-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 1:4.2.8p10+dfsg-3+deb9u2
Replaces: apparmor-profiles-extra (<< 1.8)
Depends: adduser, lsb-base (>= 3.2-13), netbase, libc6 (>= 2.17), libcap2 (>= 1:2.10), libedit2 (>= 2.11-20080614), libopts25 (>= 1:5.18.12), libssl1.1 (>= 1.1.0)
Pre-Depends: dpkg (>= 1.15.7.2)
Recommends: perl:any
Suggests: ntp-doc
Breaks: apparmor-profiles-extra (<< 1.8), dhcp3-client (<< 4.1.0-1)
Conffiles:
/etc/NetworkManager/dispatcher.d/ntp 9b47f8044e4690b4efa94e636ba6359e
/etc/apparmor.d/tunables/ntpd 5519e4c01535818cb26f2ef9e527f191
/etc/apparmor.d/usr.sbin.ntpd c7b57741ba521d0b5a2512c98b0b39c1
/etc/cron.daily/ntp 97f17637f765708160c8db4cd02fc6ae
/etc/default/ntp cd7a62fbb18fa8fe5893dee93064b328
/etc/dhcp/dhclient-exit-hooks.d/ntp a062fa223ec16a1dc79acb758ce0c0fb
/etc/init.d/ntp c11e6b1c398746e81b1a4cc160d2bbb2
/etc/ntp.conf 46220696b8e1a45932533296bddeabc9
Description: Network Time Protocol daemon and utility programs
NTP, the Network Time Protocol, is used to keep computer clocks
accurate by synchronizing them over the Internet or a local network,
or by following an accurate hardware receiver that interprets GPS,
DCF-77, NIST or similar time signals.
.
This package contains the NTP daemon and utility programs. An NTP
daemon needs to be running on each host that is to have its clock
accuracy controlled by NTP. The same NTP daemon is also used to
provide NTP service to other hosts.
.
For more information about the NTP protocol and NTP server
configuration and operation, install the package "ntp-doc".
Homepage: http://support.ntp.org/
Package: php7.0-gd
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 131
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-gd
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc6 (>= 2.4), libfreetype6 (>= 2.2.1), libgd3 (>= 2.1.1), libjpeg62-turbo (>= 1.3.1), libpng16-16 (>= 1.6.2-1), libwebp6 (>= 0.5.1), libx11-6, libxpm4, zlib1g (>= 1:1.1.4)
Description: GD module for PHP
This package provides the GD module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: grub2-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1151
Maintainer: GRUB Maintainers <pkg-grub-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.02~beta3-5+deb9u2
Replaces: grub, grub-common (<< 1.99-1), grub-coreboot (<< 2.00-4), grub-doc (<< 0.97-32), grub-efi (<< 1.99-1), grub-efi-amd64 (<< 2.00-4), grub-efi-ia32 (<< 2.00-4), grub-efi-ia64 (<< 2.00-4), grub-ieee1275 (<< 2.00-4), grub-legacy, grub-legacy-doc (<< 0.97-59), grub-linuxbios (<< 1.99-1), grub-pc (<< 2.00-4), grub-yeeloong (<< 2.00-4)
Depends: grub-common (= 2.02~beta3-5+deb9u2), dpkg (>= 1.15.4) | install-info, libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.36), liblzma5 (>= 5.1.1alpha+20120614)
Breaks: grub (<< 0.97-54), grub-doc (<< 0.97-32), grub-legacy-doc (<< 0.97-59), shim (<< 0.9+1474479173.6c180c6-0ubuntu1~)
Conflicts: grub-legacy
Description: GRand Unified Bootloader (common files for version 2)
This package contains common files shared by the distinct flavours of GRUB.
The files in this package are specific to GRUB 2, and would break GRUB
Legacy if installed on the same system.
Homepage: http://www.gnu.org/software/grub/
Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 10686
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.24-11+deb9u4
Replaces: libc6-amd64
Depends: libgcc1
Suggests: glibc-doc, debconf | debconf-2.0, libc-l10n, locales
Breaks: hurd (<< 1:0.5.git20140203-1), libtirpc1 (<< 0.2.3), locales (<< 2.24), locales-all (<< 2.24), lsb-core (<= 3.2-27), nscd (<< 2.24)
Conffiles:
/etc/ld.so.conf.d/x86_64-linux-gnu.conf 593ad12389ab2b6f952e7ede67b8fbbf
Description: GNU C Library: Shared libraries
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
Homepage: http://www.gnu.org/software/libc/libc.html
Package: libapache2-mod-passenger
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 903
Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: passenger
Version: 5.0.30-1+deb9u1
Depends: passenger (= 5.0.30-1+deb9u1), apache2-api-20120211, apache2-bin (>= 2.4.16), libapr1 (>= 1.2.7), libaprutil1 (>= 1.2.7+dfsg), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Conffiles:
/etc/apache2/mods-available/passenger.conf 9b5d4ae8b65977488aa7958a2a16ea31
/etc/apache2/mods-available/passenger.load 61421ba3247d368cfe99b540ad4ebc98
Description: Rails and Rack support for Apache2
Phusion Passenger — a.k.a. mod_rails or mod_rack — makes
deployment of Ruby web applications, such as those built on the
revolutionary Ruby on Rails web framework, a breeze.
.
This package contains the Apache 2 module required by Phusion Passenger.
Homepage: https://www.phusionpassenger.com/
Package: python2.7
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 360
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Version: 2.7.13-2+deb9u6
Replaces: python-profiler (<= 2.7.1-2), python2.7-minimal (<< 2.7.3-7~)
Depends: python2.7-minimal (= 2.7.13-2+deb9u6), libpython2.7-stdlib (= 2.7.13-2+deb9u6), mime-support
Suggests: python2.7-doc, binutils
Breaks: python-virtualenv (<< 1.7.1.2-2~), vim-athena (<< 2:7.3.547-4), vim-gnome (<< 2:7.3.547-4), vim-gtk (<< 2:7.3.547-4), vim-nox (<< 2:7.3.547-4)
Conflicts: python-profiler (<= 2.7.1-2)
Description: Interactive high-level object-oriented language (version 2.7)
Python is a high-level, interactive, object-oriented language. Its 2.7 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
Package: libgd3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 448
Maintainer: GD team <pkg-gd-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgd2
Version: 2.2.4-2+deb9u5
Depends: libc6 (>= 2.14), libfontconfig1 (>= 2.11), libfreetype6 (>= 2.2.1), libjpeg62-turbo (>= 1.3.1), libpng16-16 (>= 1.6.2-1), libtiff5 (>= 4.0.3), libwebp6 (>= 0.5.1), libx11-6, libxpm4, zlib1g (>= 1:1.1.4)
Suggests: libgd-tools
Description: GD Graphics Library
GD is a graphics library. It allows your code to quickly draw images
complete with lines, arcs, text, multiple colours, cut and paste from
other images, flood fills, and write out the result as a PNG file.
This is particularly useful in World Wide Web applications, where PNG is
one of the formats accepted for inline images by most browsers.
.
This is the runtime package of the library.
Homepage: http://www.libgd.org/
Package: python-mock
Status: install ok installed
Priority: extra
Section: python
Installed-Size: 293
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Version: 2.0.0-3
Depends: python-funcsigs (>= 1), python-pbr (>= 1.3), python-six (>= 1.9), python:any (<< 2.8), python:any (>= 2.7.5-5~)
Suggests: python-mock-doc
Description: Mocking and Testing Library
mock provides a core mock.Mock class that is intended to reduce the
need to create a host of trivial stubs throughout your test suite.
After performing an action, you can make assertions about which methods
/ attributes were used and arguments they were called with. You can
also specify return values and set specific attributes in the normal
way.
Homepage: https://github.com/testing-cabal/mock
Package: libjs-sphinxdoc
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 129
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: sphinx
Version: 1.4.9-2
Depends: libjs-jquery (>= 1.11.1), libjs-underscore (>= 1.3.1)
Description: JavaScript support for Sphinx documentation
Sphinx is a tool for producing documentation for Python projects, using
reStructuredText as markup language.
.
This package provides JavaScript code for documentation generated by Sphinx.
Homepage: http://sphinx-doc.org/
Package: discover-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4392
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: all
Version: 2.2013.01.11
Recommends: pciutils (>= 1:2.2.4)
Conflicts: libdiscover2 (<< 2.0.4-4)
Description: Data lists for Discover hardware detection system
The Discover hardware detection library uses XML data files to describe
software interfaces to various ATA, PCI, PMCMIA, SCSI, and USB devices.
While the Discover library can retrieve data from anywhere on the net, it is
often convenient to have a set of Discover XML data files on one's system;
thus, this package.
Package: libiptc0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 88
Maintainer: Arturo Borrero Gonzalez <arturo@debian.org>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.6.0+snapshot20161117-6
Depends: libc6 (>= 2.2.5), libip4tc0 (>= 1.6.0+snapshot20161117), libip6tc0 (>= 1.6.0+snapshot2016111)
Description: netfilter libiptc library
The user-space iptables C library from the Netfilter xtables framework.
.
iptables v4/v6 ruleset ADT and kernel interface.
.
This library has been considered private for years (and still is), in the
sense of changing symbols and backward compatibility not guaranteed.
Homepage: http://www.netfilter.org/
Package: apache2-data
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 865
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: apache2
Version: 2.4.25-3+deb9u13
Description: Apache HTTP Server (common files)
The Apache HTTP Server Project's goal is to build a secure, efficient and
extensible HTTP server as standards-compliant open source software. The
result has long been the number one web server on the Internet.
.
This package contains architecture-independent common files such as icons,
error pages and static index files.
Homepage: http://httpd.apache.org/
Package: libnl-genl-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 52
Maintainer: Heiko Stuebner <mmind@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnl3
Version: 3.2.27-2
Depends: libnl-3-200 (= 3.2.27-2), libc6 (>= 2.4)
Description: library for dealing with netlink sockets - generic netlink
This is a library for applications dealing with netlink sockets.
The library provides an interface for raw netlink messaging and various
netlink family specific interfaces.
.
API to the generic netlink protocol, an extended version of the netlink
protocol.
Homepage: http://www.infradead.org/~tgr/libnl/
Package: passenger
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 4946
Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 5.0.30-1+deb9u1
Replaces: libapache2-mod-passenger (<< 3.0.11debian), ruby-passenger (<< 4.0.53-2~)
Depends: ruby (>= 1:2.3~0), ruby-rack, libc6 (>= 2.16), libcurl3 (>= 7.16.2), libgcc1 (>= 1:3.0), libgmp10, libstdc++6 (>= 5.2), libuv1 (>= 1.4.2), zlib1g (>= 1:1.1.4), libruby2.3 (>= 2.3.0~preview2)
Suggests: nodejs, passenger-doc, python, rails
Breaks: libapache2-mod-passenger (<< 3.0.11debian), ruby-passenger (<< 4.0.53-2~)
Description: Rails and Rack support
Phusion Passenger — a.k.a. mod_rails or mod_rack — makes
deployment of Ruby web applications, such as those built on the
revolutionary Ruby on Rails web framework, a breeze.
Homepage: https://www.phusionpassenger.com/
Package: libclass-dbi-mysql-perl
Status: install ok installed
Priority: extra
Section: perl
Installed-Size: 68
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.00-3
Depends: perl, libclass-dbi-perl (>= 0.94), libdbd-mysql-perl
Recommends: libtime-piece-mysql-perl
Description: extensions to Class::DBI for MySQL
The Class::DBI::mysql module is an extension to Class::DBI, containing several
functions and optimisations for the MySQL database.
Homepage: http://search.cpan.org/dist/Class-DBI-mysql/
Package: distro-info-data
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 15
Maintainer: Benjamin Drung <bdrung@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.36
Replaces: distro-info (<< 0.3~)
Breaks: distro-info (<< 0.3~)
Description: information about the distributions' releases (data files)
Information about all releases of Debian and Ubuntu. The distro-info script
will give you the codename for e.g. the latest stable release of your
distribution. To get information about a specific distribution there are the
debian-distro-info and the ubuntu-distro-info scripts.
.
This package contains the data files.
Package: libtiff5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 593
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.0.8-2+deb9u8
Depends: libc6 (>= 2.14), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.1.4)
Description: Tag Image File Format (TIFF) library
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
includes the shared library.
Homepage: http://libtiff.maptools.org
Package: gettext-base
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 718
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gettext
Version: 0.19.8.1-2+deb9u1
Depends: libc6 (>= 2.14)
Description: GNU Internationalization utilities for the base system
This package includes the gettext and ngettext programs which allow
other packages to internationalize the messages given by shell scripts.
Homepage: http://www.gnu.org/software/gettext/
Package: imagemagick-6.q16
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 743
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: imagemagick
Version: 8:6.9.7.4+dfsg-11+deb9u14
Replaces: imagemagick (<< 8:6.9.2.10+dfsg-2~)
Provides: imagemagick, imagemagick-6.defaultquantum
Depends: libc6 (>= 2.4), libmagickcore-6.q16-3 (>= 8:6.9.6.8), libmagickwand-6.q16-3 (>= 8:6.9.6.8), hicolor-icon-theme
Recommends: libmagickcore-6.q16-3-extra, ghostscript, netpbm
Suggests: imagemagick-doc, autotrace, cups-bsd | lpr | lprng, curl, enscript, ffmpeg, gimp, gnuplot, grads, graphviz, groff-base, hp2xx, html2ps, libwmf-bin, mplayer, povray, radiance, sane-utils, texlive-base-bin, transfig, ufraw-batch, xdg-utils
Breaks: libmagickcore-dev (<< 8:6.9.2.10+dfsg-2~)
Description: image manipulation programs -- quantum depth Q16
ImageMagick is a software suite to create, edit, and compose bitmap images.
It can read, convert and write images in a variety of formats (over 100)
including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript,
SVG, and TIFF. Use ImageMagick to translate, flip, mirror, rotate, scale,
shear and transform images, adjust image colors, apply various special
effects, or draw text, lines, polygons, ellipses and Bézier curves.
All manipulations can be achieved through shell commands as well as through
an X11 graphical interface (display).
.
For working with the SVG, WMF, OpenEXR, DjVu and Graphviz formats,
you need to install the libmagickcore-6.q16-3-extra package.
.
This version of imagemagick is compiled for a channel
depth of 16 bits (Q16).
Homepage: http://www.imagemagick.org/
Package: libfdisk1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 469
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.17), libuuid1 (>= 2.16)
Description: fdisk partitioning library
The libfdisk library is used for manipulating partition tables. It is
the core of the fdisk, cfdisk, and sfdisk tools.
Package: ssl-cert
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 63
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.0.39
Depends: debconf (>= 0.5) | debconf-2.0, openssl (>= 0.9.8g-9), adduser
Suggests: openssl-blacklist
Description: simple debconf wrapper for OpenSSL
This package enables unattended installs of packages that
need to create SSL certificates.
.
It is a simple wrapper for OpenSSL's certificate request utility that
feeds it with the correct user variables.
Package: libstemmer0d
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 350
Maintainer: Stefano Rivera <stefanor@debian.org>
Architecture: amd64
Multi-Arch: same
Source: snowball (0+svn585-1)
Version: 0+svn585-1+b2
Depends: libc6 (>= 2.4)
Description: Snowball stemming algorithms for use in Information Retrieval
Snowball provides access to efficient algorithms for calculating a
"stemmed" form of a word. This is a form with most of the common
morphological endings removed; hopefully representing a common
linguistic base form. This is most useful in building search engines
and information retrieval software; for example, a search with stemming
enabled should be able to find a document containing "cycling" given the
query "cycles".
.
Snowball provides algorithms for several (mainly European) languages.
It also provides access to the classic Porter stemming algorithm for
English: although this has been superseded by an improved algorithm, the
original algorithm may be of interest to information retrieval
researchers wishing to reproduce results of earlier experiments.
Homepage: http://snowball.tartarus.org/
Package: php7.0-mcrypt
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 71
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-mcrypt
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc6 (>= 2.14), libltdl7 (>= 2.4.6), libmcrypt4
Description: libmcrypt module for PHP
This package provides the libmcrypt module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libpipeline1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 75
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpipeline
Version: 1.4.1-2
Depends: libc6 (>= 2.15)
Description: pipeline manipulation library
This is a C library for setting up and running pipelines of processes,
without needing to involve shell command-line parsing which is often
error-prone and insecure.
Homepage: http://libpipeline.nongnu.org/
Package: autoconf
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1868
Maintainer: Ben Pfaff <pfaffben@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.69-10
Depends: perl (>> 5.005), m4 (>= 1.4.13), debianutils (>= 1.8)
Recommends: automake | automaken
Suggests: autoconf-archive, gnu-standards, autoconf-doc, libtool, gettext
Breaks: gettext (<< 0.10.39), pkg-config (<< 0.25-1.1)
Conffiles:
/etc/emacs/site-start.d/50autoconf.el 297521889d690871ec9d89c5eeff745a
Description: automatic configure script builder
The standard for FSF source packages. This is only useful if you
write your own programs or if you extensively modify other people's
programs.
.
For an extensive library of additional Autoconf macros, install the
`autoconf-archive' package.
.
This version of autoconf is not compatible with scripts meant for
Autoconf 2.13 or earlier.
Homepage: http://www.gnu.org/software/autoconf/
Package: initramfs-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 105
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.130
Provides: linux-initramfs-tool
Depends: initramfs-tools-core (= 0.130), linux-base
Suggests: bash-completion
Breaks: console-setup (<< 1.72), cryptsetup (<< 2:1.6.6-4~), e2fsprogs (<< 1.42.13), elilo (<< 3.12-3.1~), initscripts (<< 2.88dsf-59.3~), lilo (<< 22.8-8.2~), lvm2 (<< 2.02.111-2.1~), s390-tools (<< 1.8.3-2~), systemd-sysv (<< 186), upstart
Conflicts: linux-initramfs-tool, usplash (<< 0.5.50)
Conffiles:
/etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297
/etc/kernel/postinst.d/initramfs-tools f9dcd9b9d4b6aa84c18407f2aeecb096
/etc/kernel/postrm.d/initramfs-tools f57d0b03f79fd46dd1a1fa3b00206070
Description: generic modular initramfs generator (automation)
This package builds a bootable initramfs for Linux kernel packages. The
initramfs is loaded along with the kernel and is responsible for
mounting the root filesystem and starting the main init system.
Package: libpcre3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 668
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.39-3
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Old Perl 5 Compatible Regular Expression Library - runtime files
This is a library of functions to support regular expressions whose syntax
and semantics are as close as possible to those of the Perl 5 language.
.
New packages should use the newer pcre2 packages, and existing
packages should migrate to pcre2.
.
This package contains the runtime libraries.
Package: libksba8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 264
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libksba
Version: 1.3.5-2
Depends: libc6 (>= 2.14), libgpg-error0 (>= 1.14)
Description: X.509 and CMS support library
KSBA (pronounced Kasbah) is a library to make X.509 certificates as
well as the CMS easily accessible by other applications. Both
specifications are building blocks of S/MIME and TLS.
.
KSBA provides these subsystems: ASN.1 Parser, BER Decoder, BER
Encoder, Certificate Handling and CMS Handling.
.
This package contains the runtime library files.
Homepage: http://www.gnupg.org/related_software/libksba/
Package: dnsutils
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 520
Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Architecture: amd64
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u12
Replaces: bind, bind9 (<< 1:9.1.0-3)
Depends: libbind9-140 (= 1:9.10.3.dfsg.P4-12.3+deb9u12), libc6 (>= 2.4), libcap2 (>= 1:2.10), libcomerr2 (>= 1.01), libdns162 (= 1:9.10.3.dfsg.P4-12.3+deb9u12), libgeoip1, libgssapi-krb5-2 (>= 1.6.dfsg.2), libisc160 (= 1:9.10.3.dfsg.P4-12.3+deb9u12), libisccfg140 (= 1:9.10.3.dfsg.P4-12.3+deb9u12), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), liblwres141 (= 1:9.10.3.dfsg.P4-12.3+deb9u12), libssl1.0.2 (>= 1.0.2d), libxml2 (>= 2.6.27), bind9-host | host
Suggests: rblcheck
Conflicts: netstd (<< 2.00)
Description: Clients provided with BIND
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers various client programs related to DNS that are
derived from the BIND source tree.
.
- dig - query the DNS in various ways
- nslookup - the older way to do it
- nsupdate - perform dynamic updates (See RFC2136)
Package: libmariadbclient18
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4309
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mariadb-10.1
Version: 10.1.48-0+deb9u2
Depends: mysql-common, libc6 (>= 2.17), libstdc++6 (>= 5), zlib1g (>= 1:1.1.4)
Description: MariaDB database client library
MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
server. SQL (Structured Query Language) is the most popular database query
language in the world. The main goals of MariaDB are speed, robustness and
ease of use.
.
This package includes the client library.
Homepage: https://mariadb.org/
Package: librtmp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 142
Maintainer: Debian Multimedia Maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: rtmpdump (2.4+20151223.gitfa8646d.1-1)
Version: 2.4+20151223.gitfa8646d.1-1+b1
Depends: libc6 (>= 2.14), libgmp10, libgnutls30 (>= 3.5.6), libhogweed4, libnettle6, zlib1g (>= 1:1.1.4)
Description: toolkit for RTMP streams (shared library)
A small dumper for media content streamed over the RTMP protocol (like BBC's
iPlayer high quality streams). Supplying an RTMP URL will result in a dumped
flv file, which can be played/transcoded with standard tools.
.
This package contains the shared libraries, header files needed by
programs that want to use librtmp.
Homepage: http://rtmpdump.mplayerhq.hu/
Package: libdevmapper1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 401
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.02.168-2)
Version: 2:1.02.137-2
Depends: libc6 (>= 2.22), libselinux1 (>= 1.32), libudev1 (>= 183), dmsetup (>= 2:1.02.137-2)
Breaks: liblvm2app2.2 (<< 2.02.122), lvm2 (<< 2.02.122)
Conflicts: libdevmapper1.02
Description: Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but software raid,
and other drivers that create "virtual" block devices.
.
This package contains the (user-space) shared library for accessing the
device-mapper; it allows usage of the device-mapper through a clean,
consistent interface (as opposed to through kernel ioctls).
Homepage: http://sources.redhat.com/lvm2/
Package: php7.0-curl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 115
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-curl
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc6 (>= 2.14), libcurl3 (>= 7.18.0)
Description: CURL module for PHP
This package provides the CURL module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: gcc
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 43
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Source: gcc-defaults (1.168)
Version: 4:6.3.0-4
Provides: c-compiler
Depends: cpp (>= 4:6.3.0-4), gcc-6 (>= 6.3.0-9~)
Recommends: libc6-dev | libc-dev
Suggests: gcc-multilib, make, manpages-dev, autoconf, automake, libtool, flex, bison, gdb, gcc-doc
Conflicts: gcc-doc (<< 1:2.95.3)
Description: GNU C compiler
This is the GNU C compiler, a fairly portable optimizing compiler for C.
.
This is a dependency package providing the default GNU C compiler.
Package: m4
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 345
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.4.18-1
Depends: libc6 (>= 2.17), libsigsegv2 (>= 2.9)
Suggests: m4-doc
Description: macro processing language
GNU `m4' is an implementation of the traditional UNIX macro
processor. It is mostly SVR4 compatible, although it has some
extensions (for example, handling more than 9 positional parameters to
macros). `m4' also has builtin functions for including files, running
shell commands, doing arithmetic, etc. Autoconf needs GNU `m4' for
generating `configure' scripts, but not for running them.
Homepage: http://www.gnu.org/software/m4/
Package: manpages-it
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 574
Maintainer: Francesco Paolo Lovergine <frankie@debian.org>
Architecture: all
Source: man-pages-it
Version: 3.73-2
Suggests: man-browser
Description: Italian version of the manual pages
This package contains the manual pages (all sections) translated into
Italian. Translation is (continuously) in progress, and we try to
keep in sync English and Italian versions as much as possible. Anyway
sometimes Italian pages happen to be outdated; in these cases you need
to refer to the original English ones.
Homepage: http://www.pluto.it/ildp/man/index.html
Package: php7.0-cli
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 4342
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-cli, phpapi-20151012
Depends: libedit2 (>= 2.11-20080614-4), libmagic1, libpcre3 (>= 1:8.20), mime-support, php7.0-common (= 7.0.33-0+deb9u12), php7.0-json, php7.0-opcache, php7.0-readline, tzdata, ucf, libc6 (>= 2.15), libssl1.1 (>= 1.1.0), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Description: command-line interpreter for the PHP scripting language
This package provides the /usr/bin/php7.0 command interpreter, useful for
testing PHP scripts from a shell or performing general shell scripting tasks.
.
The following extensions are built in: Core date filter hash libxml openssl
pcntl pcre Reflection session SPL standard zlib.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: ruby2.3
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 241
Maintainer: Antonio Terceiro <terceiro@debian.org>
Architecture: amd64
Multi-Arch: allowed
Version: 2.3.3-1+deb9u11
Depends: rubygems-integration (>= 1.8), libc6 (>= 2.2.5), libgmp10, libruby2.3 (>= 2.3.0~preview2)
Recommends: fonts-lato, libjs-jquery
Description: Interpreter of object-oriented scripting language Ruby
Ruby is the interpreted scripting language for quick and easy
object-oriented programming. It has many features to process text
files and to do system management tasks (as in perl). It is simple,
straight-forward, and extensible.
.
In the name of this package, `2.3' indicates the Ruby library compatibility
version. This package currently provides the `2.3.x' branch of Ruby.
Homepage: http://www.ruby-lang.org/
Package: python3-pkg-resources
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 511
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-setuptools
Version: 33.1.1-1
Depends: python3:any (>= 3.3.2-2~)
Suggests: python3-setuptools
Description: Package Discovery and Resource Access using pkg_resources
The pkg_resources module provides an API for Python libraries to
access their resource files, and for extensible applications and
frameworks to automatically discover plugins. It also provides
runtime support for using C extensions that are inside zipfile-format
eggs, support for merging packages that have separately-distributed
modules or subpackages, and APIs for managing Python's current
"working set" of active packages.
Homepage: https://pypi.python.org/pypi/setuptools
Package: postgrey
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 155
Maintainer: Antonio Radici <antonio@debian.org>
Architecture: all
Version: 1.36-3+deb9u2
Depends: adduser, debconf, libberkeleydb-perl, libnetaddr-ip-perl, libnet-dns-perl, libnet-server-perl (>= 0.87), perl, ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0
Recommends: libnet-rblclient-perl, libparse-syslog-perl, postfix | exim4
Breaks: libsys-syslog-perl (<< 0.21)
Conffiles:
/etc/init.d/postgrey 295598d6278b72c15f2b125c91da1309
/etc/logcheck/ignore.d.server/postgrey 80c8c7acf049f812a6e0e42af22f5b4a
/etc/logcheck/violations.ignore.d/postgrey a4654e9050c850af272cf71699d061ab
Description: greylisting implementation for Postfix
This package provides a policy server for Postfix to implement "greylisting".
.
Greylisting is a spam filtering method that rejects email from external
servers on the first try. Spammers don't usually retry sending their
messages, whereas legitimate mail servers do.
.
While Postgrey is designed for use with Postfix, it can also be used
with Exim.
Homepage: http://postgrey.schweikert.ch/
Package: libgeoip1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 240
Maintainer: Patrick Matthäi <pmatthaei@debian.org>
Architecture: amd64
Multi-Arch: same
Source: geoip
Version: 1.6.9-4
Depends: libc6 (>= 2.4)
Recommends: geoip-database
Suggests: geoip-bin
Description: non-DNS IP-to-country resolver library
GeoIP is a C library that enables the user to find the country that any
IP address or hostname originates from. It uses a file based database.
.
This database simply contains IP blocks as keys, and countries as values and
it should be more complete and accurate than using reverse DNS lookups.
.
This package contains the shared library.
Homepage: http://www.maxmind.com/
Package: python-pkg-resources
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 540
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-setuptools
Version: 33.1.1-1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Suggests: python-setuptools
Description: Package Discovery and Resource Access using pkg_resources
The pkg_resources module provides an API for Python libraries to
access their resource files, and for extensible applications and
frameworks to automatically discover plugins. It also provides
runtime support for using C extensions that are inside zipfile-format
eggs, support for merging packages that have separately-distributed
modules or subpackages, and APIs for managing Python's current
"working set" of active packages.
Homepage: https://pypi.python.org/pypi/setuptools
Package: libnet-dns-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 942
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.07-1
Replaces: libnet-dns-sec-perl (<< 1.01)
Depends: perl, libdigest-hmac-perl, libio-socket-inet6-perl, libnet-ip-perl
Breaks: fpdns (<< 20130404~), libnet-dns-sec-perl (<< 1.01), spamassassin (<< 3.4.0-2~)
Description: Perform DNS queries from a Perl script
Net::DNS is a DNS resolver implemented in Perl supporting IPv6.
It allows the programmer to perform nearly any type of DNS query
from a Perl script.
Homepage: http://www.net-dns.org/
Package: lsb-release
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 62
Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 9.20161125
Depends: python3:any (>= 3.4~), distro-info-data
Recommends: apt
Suggests: lsb
Description: Linux Standard Base version reporting utility
The Linux Standard Base (http://www.linuxbase.org/) is a standard
core system that third-party applications written for Linux can
depend upon.
.
The lsb-release command is a simple tool to help identify the Linux
distribution being used and its compliance with the Linux Standard Base.
LSB conformance will not be reported unless the required metapackages are
installed.
.
While it is intended for use by LSB packages, this command may also
be useful for programmatically distinguishing between a pure Debian
installation and derived distributions.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb
Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 15103
Maintainer: Michael Stone <mstone@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 8.26-3
Replaces: mktemp, realpath, timeout
Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.17), libselinux1 (>= 2.1.13)
Conflicts: timeout
Description: GNU core utilities
This package contains the basic file, shell and text manipulation
utilities which are expected to exist on every operating system.
.
Specifically, this package includes:
arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
csplit cut date dd df dir dircolors dirname du echo env expand expr
factor false flock fmt fold groups head hostid id install join link ln
logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
tail tee test timeout touch tr true truncate tsort tty uname unexpand
uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils
Package: roundcube-mysql
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 99
Maintainer: Debian Roundcube Maintainers <pkg-roundcube-maintainers@lists.alioth.debian.org>
Architecture: all
Source: roundcube
Version: 1.2.3+dfsg.1-4+deb9u10
Depends: mariadb-client | default-mysql-client | virtual-mysql-client, php-mysqlnd | php-mysql
Suggests: mariadb-server | default-mysql-server
Description: metapackage providing MySQL dependencies for RoundCube
This package provides MySQL dependencies for RoundCube Webmail, a
skinnable AJAX based webmail solution for IMAP servers. Install this
one if you want to use a MySQL database with RoundCube.
Homepage: https://www.roundcube.net/
Package: file
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 96
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: amd64
Multi-Arch: foreign
Version: 1:5.30-1+deb9u3
Depends: libc6 (>= 2.4), libmagic1 (= 1:5.30-1+deb9u3), zlib1g (>= 1:1.1.4)
Description: Recognize the type of data in a file using "magic" numbers
The file command is "a file type guesser", a command-line tool that
tells you in words what kind of data a file contains.
.
This package contains the file program itself.
Homepage: http://www.darwinsys.com/file/
Package: libima-dbi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 77
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.35-2
Depends: perl, libclass-data-inheritable-perl, libdbi-perl, libdbix-contextualfetch-perl
Description: module for database connection caching and organization
Ima::DBI attempts to organize and facilitate caching and more
efficient use of database connections and statement handles.
.
One of the things that can be annoying about writing large programs
with DBI is making sure that you do not have duplicate database
handles open. There is also the issue of the somewhat wasteful nature
of the prepare/execute/finish route that users tend to go through.
.
The new DBI->connect_cached and DBI->prepare_cached help a lot, but
you still have to throw around global information about the data
source, username and password.
.
So, after a while the author grew a small library of DBI helper
routines and techniques. Ima::DBI is the culmination of all this,
put into a nice(?), clean(?) class to be inherited from.
Homepage: https://metacpan.org/release/Ima-DBI
Package: libfftw3-double3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2125
Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fftw3
Version: 3.3.5-3
Replaces: libfftw3-3 (<< 3.3.3-1)
Depends: libc6 (>= 2.14), libgomp1 (>= 4.9)
Suggests: libfftw3-bin, libfftw3-dev
Breaks: libfftw3-3 (<< 3.3.3-1)
Description: Library for computing Fast Fourier Transforms - Double precision
The FFTW library computes Fast Fourier Transforms (FFT) in one or more
dimensions. It is extremely fast. This package contains the shared library
for double precision transforms.
.
To get the static library and the header files, you need to install
libfftw3-dev. For documentation, see libfftw3-doc.
Homepage: http://fftw.org
Package: libnet-server-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 484
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.008-3
Depends: perl, libcgi-pm-perl | perl (<< 5.19), libio-multiplex-perl, libio-socket-inet6-perl, libnet-cidr-perl, libsocket6-perl
Suggests: libio-socket-ssl-perl, liblog-log4perl-perl, libnet-ssleay-perl
Description: extensible, general perl server engine
Net::Server is an extensible, general perl server engine that combines the
good properties from Net::Daemon, NetServer::Generic, and Net::FTPServer;
and borrows various concepts from the Apache webserver.
.
Features include:
.
* Single Server Mode
* Inetd Server Mode
* Preforking Simple Mode (PreForkSimple)
* Preforking Managed Mode (PreFork)
* Forking Mode
* Multiplexing Mode using a single process
* Multi port accepts on Single, Preforking, and Forking modes
* Simultaneous accept/recv on tcp, udp, and unix sockets
* Safe signal handling in Fork/PreFork avoids perl signal trouble
* User customizable hooks
* Chroot ability after bind
* Change of user and group after bind
* Basic allow/deny access control
* Customized logging (choose Syslog, log_file, or STDERR)
* HUP able server (clean restarts via sig HUP)
* Dequeue ability in all Fork and PreFork modes.
* Taint clean
* Written in Perl
* Protection against buffer overflow
* Clean process flow
* Extensibility
Homepage: https://metacpan.org/release/Net-Server
Package: gawk
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 2199
Maintainer: Adrian Bunk <bunk@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1:4.1.4+dfsg-1
Provides: awk
Pre-Depends: libc6 (>= 2.15), libgmp10, libmpfr4 (>= 3.1.3), libreadline7 (>= 6.0), libsigsegv2 (>= 2.9)
Suggests: gawk-doc
Description: GNU awk, a pattern scanning and processing language
`awk', a program that you can use to select particular records in a
file and perform operations upon them.
.
Gawk is the GNU Project's implementation of the AWK programming language.
It conforms to the definition of the language in the POSIX 1003.2 Command
Language And Utilities Standard. This version in turn is based on the
description in The AWK Programming Language, by Aho, Kernighan, and
Weinberger, with the additional features defined in the System V Release
4 version of UNIX awk. Gawk also provides more recent Bell Labs awk
extensions, and some GNU-specific extensions.
Homepage: http://www.gnu.org/software/gawk/
Package: libicu57
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30043
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 57.1-6+deb9u5
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Description: International Components for Unicode
ICU is a C++ and C library that provides robust and full-featured
Unicode and locale support. This package contains the runtime
libraries for ICU.
Homepage: http://www.icu-project.org
Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1757
Maintainer: Debian iproute2 Maintainers <ah-iproute@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.9.0-1+deb9u1
Replaces: iproute
Provides: arpd
Depends: libc6 (>= 2.14), libdb5.3, libelf1 (>= 0.131), libmnl0 (>= 1.0.3-4~), libselinux1 (>= 2.0.15)
Recommends: libatm1 (>= 2.4.1-17~), libxtables12 (>= 1.6.0+snapshot20161117)
Suggests: iproute2-doc
Conflicts: arpd, iproute (<< 20130000-1)
Conffiles:
/etc/iproute2/bpf_pinning fd070252e6e9996bd04d9d59e4ce21eb
/etc/iproute2/ematch_map b91e7f9b26918449bade9573f8871d61
/etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
/etc/iproute2/nl_protos c0fc5315e2dd3c6b50f19da3678bce80
/etc/iproute2/rt_dsfield 4c80d267a84d350d89d88774efe48a0f
/etc/iproute2/rt_protos a4f97323f29caf9faf49596aea11d91a
/etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
/etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
/etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
/etc/iproute2/rt_tables.d/README 16d42be21c00b9edfae1fd4c39c15afc
Description: networking and traffic control tools
The iproute2 suite is a collection of utilities for networking and
traffic control.
.
These tools communicate with the Linux kernel via the (rt)netlink
interface, providing advanced features not available through the
legacy net-tools commands 'ifconfig' and 'route'.
Homepage: https://wiki.linuxfoundation.org/networking/iproute2
Package: tcpd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 92
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: foreign
Source: tcp-wrappers
Version: 7.6.q-26
Depends: libc6 (>= 2.14), libwrap0 (= 7.6.q-26)
Description: Wietse Venema's TCP wrapper utilities
Wietse Venema's network logger, also known as TCPD or LOG_TCP.
.
These programs log the client host name of incoming telnet,
ftp, rsh, rlogin, finger etc. requests.
.
Security options are:
- access control per host, domain and/or service;
- detection of host name spoofing or host address spoofing;
- booby traps to implement an early-warning system.
Package: libbsd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 159
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libbsd
Version: 0.8.3-1+deb9u1
Depends: libc6 (>= 2.16)
Description: utility functions from BSD systems - shared library
This library provides some C functions such as strlcpy() that are commonly
available on BSD systems but not on others like GNU systems.
.
For a detailed list of the provided functions, please see the libbsd-dev
package description.
Homepage: https://libbsd.freedesktop.org/
Package: python-configargparse
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 83
Maintainer: Debian Let's Encrypt <letsencrypt-devel@lists.alioth.debian.org>
Architecture: all
Version: 0.11.0-1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: replacement for argparse with config files and environment variables (Python 2)
Applications with more than a handful of user-settable options are best
configured through a combination of command line args, config files,
hard-coded defaults, and in some cases, environment variables.
.
Python’s command line parsing modules such as argparse have very limited
support for config files and environment variables, so this module extends
argparse to add these features.
.
This is the Python 2 module.
Homepage: https://github.com/zorro3/ConfigArgParse
Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 4027
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: foreign
Version: 1.43.4-2+deb9u2
Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2)
Pre-Depends: e2fslibs (= 1.43.4-2+deb9u2), libblkid1 (>= 2.17.2), libc6 (>= 2.14), libcomerr2 (>= 1.42~WIP-2011-10-05-1), libss2 (>= 1.34-1), libuuid1 (>= 2.16), util-linux (>= 2.15~rc1-1)
Suggests: gpart, parted, fuse2fs, e2fsck-static
Conflicts: dump (<< 0.4b4-4), initscripts (<< 2.85-4), quota (<< 1.55-8.1), sysvinit (<< 2.85-4)
Conffiles:
/etc/mke2fs.conf 22503ecadd27f788ab3e612aded4f5b0
Description: ext2/ext3/ext4 file system utilities
The ext2, ext3 and ext4 file systems are successors of the original ext
("extended") file system. They are the main file system types used for
hard disks on Debian and other Linux systems.
.
This package contains programs for creating, checking, and maintaining
ext2/3/4-based file systems. It also includes the "badblocks" program,
which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net
Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2774
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.29b-1.1+deb9u1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: bzip2, ncompress, xz-utils, tar-scripts
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
/etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
Tar is a program for packaging a set of files as a single archive in tar
format. The function it performs is conceptually similar to cpio, and to
things like PKZIP in the DOS world. It is heavily used by the Debian package
management system, and is useful for performing system backups and exchanging
sets of files with others.
Package: libkrb5support0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 159
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.15-1+deb9u3
Depends: libc6 (>= 2.14), libkeyutils1 (>= 1.4)
Breaks: libgssapi-krb5-2 (<< 1.13~alpha1-1), libk5crypto3 (<< 1.13~alpha1-1), libkadm5clnt-mit9 (<< 1.13~alpha1-1), libkadm5srv-mit9 (<< 1.13~alpha1-1), libkdb5-7 (<< 1.13~alpha1-1)
Description: MIT Kerberos runtime libraries - Support library
Kerberos is a system for authenticating users and services on a network.
Kerberos is a trusted third-party service. That means that there is a
third party (the Kerberos server) that is trusted by all the entities on
the network (users and services, usually called "principals").
.
This is the MIT reference implementation of Kerberos V5.
.
This package contains an internal runtime support library used by other
Kerberos libraries.
Homepage: http://web.mit.edu/kerberos/
Package: php7.0-pspell
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 51
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-pspell
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libaspell15 (>= 0.60.7~20110707), libc6 (>= 2.4)
Description: pspell module for PHP
This package provides the pspell module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libprocps6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 121
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: procps
Version: 2:3.3.12-3+deb9u1
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.14), libsystemd0 (>= 209)
Description: library for accessing process information from /proc
The libprocps library is a way of accessing information out of the /proc
filesystem.
.
This package contains the shared libraries necessary to run programs
compiled with libprocps.
Homepage: https://gitlab.com/procps-ng/procps
Package: laptop-detect
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 18
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Version: 0.13.8
Depends: dmidecode (>> 2.8-2)
Description: system chassis type checker
This package provides a simple shell script which attempts to determine
whether it is being run on a laptop (or similar portable machine). It is
mainly useful for installers.
Package: libbz2-1.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 96
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: bzip2
Version: 1.0.6-8.1
Depends: libc6 (>= 2.4)
Description: high-quality block-sorting file compressor library - runtime
This package contains libbzip2 which is used by the bzip2 compressor.
.
bzip2 is a freely available, patent free, high-quality data compressor.
It typically compresses files to within 10% to 15% of the best available
techniques, whilst being around twice as fast at compression and six
times faster at decompression.
.
bzip2 compresses files using the Burrows-Wheeler block-sorting text
compression algorithm, and Huffman coding. Compression is generally
considerably better than that achieved by more conventional
LZ77/LZ78-based compressors, and approaches the performance of the PPM
family of statistical compressors.
.
The archive file format of bzip2 (.bz2) is incompatible with that of its
predecessor, bzip (.bz).
Homepage: http://www.bzip.org/
Package: libruby
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 18
Maintainer: Antonio Terceiro <terceiro@debian.org>
Architecture: all
Source: ruby-defaults
Version: 1:2.3.3
Depends: libruby2.3
Description: Libraries necessary to run Ruby
Ruby is the interpreted scripting language for quick and easy
object-oriented programming. It has many features to process text
files and to do system management tasks (as in perl). It is simple,
straight-forward, and extensible.
.
This package includes the 'libruby' library, necessary to run Ruby.
.
This package is a dependency package, which depends on Debian's default Ruby
version (currently v2.3).
Homepage: http://www.ruby-lang.org/
Package: ucf
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 191
Maintainer: Manoj Srivastava <srivasta@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.0036
Depends: debconf (>= 1.5.19), coreutils (>= 5.91)
Conffiles:
/etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e
Description: Update Configuration File(s): preserve user changes to config files
Debian policy mandates that user changes to configuration files must be
preserved during package upgrades. The easy way to achieve this behavior
is to make the configuration file a 'conffile', in which case dpkg
handles the file specially during upgrades, prompting the user as
needed.
.
This is appropriate only if it is possible to distribute a default
version that will work for most installations, although some system
administrators may choose to modify it. This implies that the
default version will be part of the package distribution, and must
not be modified by the maintainer scripts during installation (or at
any other time).
.
This script attempts to provide conffile-like handling for files that
may not be labelled conffiles, and are not shipped in a Debian package,
but handled by the postinst instead. This script allows one to
maintain files in /etc, preserving user changes and in general
offering the same facilities while upgrading that dpkg normally
provides for 'conffiles'.
.
Additionally, this script provides facilities for transitioning a
file that had not been provided with conffile-like protection to come
under this schema, and attempts to minimize questions asked at
installation time. Indeed, the transitioning facility is better than the
one offered by dpkg while transitioning a file from a non-conffile to
conffile status.
Package: pax
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 170
Maintainer: Thorsten Glaser <tg@mirbsd.de>
Architecture: amd64
Multi-Arch: foreign
Version: 1:20161104-2
Depends: libc6 (>= 2.14)
Enhances: arj, binutils, bsdtar, cpio, dpkg, gzip, lha, p7zip, rar, star, tar, unrar, unzip, zip
Description: Portable Archive Interchange (cpio, pax, tar)
paxtar is an implementation of an archiving utility that reads
and writes several formats - traditional ones, the extended
formats specified in IEEE 1003.1, and the ar(5) format used
by deb(5) packages (MirBSD specific paxtar extension). The
pax interface was designed by IEEE 1003.2 as a compromise in
the chronic controversy over which of tar or cpio is best, but
this implementation offers paxcpio and paxtar for easy calling.
.
This is the MirBSD paxtar implementation supporting the formats
ar, bcpio, cpio, SVR4 cpio with and without CRC, old tar, and
ustar, but not the format known as pax yet. It has extensions
for removing non-numerical user and group IDs from the archive,
storing hardlinked files only once, setting ownership to the
superuser, anonymising inode and device information, changing
the mtime to zero, and producing GNU tar compatible trailing
slashes on ustar directory nodes. Its "ar" format is suitable
for operating on *.deb files, unlike that of GNU binutils.
.
Note that ACLs and Extended Attributes are not supported.
Also, on Debian GNU/Hurd and Debian GNU/Linux (but not
Debian GNU/kFreeBSD), size of archive members is limited
to the width of the "long" type, that is, 2 GiB on platforms
that do not have a 64-bit "long" type, due to a bug in the
GNU C library (Debian #317466).
Homepage: http://www.mirbsd.org/pax.htm
Package: libkmod2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 116
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: kmod
Version: 23-2
Depends: libc6 (>= 2.17)
Description: libkmod shared library
This library provides an API for insertion, removal, configuration and
listing of kernel modules.
Package: libio-socket-ssl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 504
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.044-1
Depends: libnet-ssleay-perl (>= 1.59), netbase, perl
Recommends: libnet-libidn-perl | libnet-idn-encode-perl | liburi-perl, perl (>= 5.15.6) | libsocket-perl | libsocket6-perl, perl (>= 5.19.8) | libio-socket-ip-perl (>= 0.20) | libio-socket-inet6-perl
Suggests: ca-certificates
Description: Perl module implementing object oriented interface to SSL sockets
This module is a true drop-in replacement for IO::Socket::INET that
uses SSL to encrypt data before it is transferred to a remote server
or client. IO::Socket::SSL supports all the extra features that one
needs to write a full-featured SSL client or server application:
multiple SSL contexts, cipher selection, certificate verification, and
SSL version selection. As an extra bonus, it works perfectly with
mod_perl.
.
IO::Socket::SSL uses IPv6 if libio-socket-ip-perl (>= 0.20) or
libio-socket-inet6-perl is installed.
Homepage: https://metacpan.org/release/IO-Socket-SSL
Package: php-xml
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 12
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: all
Source: php-defaults (49)
Version: 1:7.0+49
Depends: php-common, php7.0-xml
Description: DOM, SimpleXML, WDDX, XML, and XSL module for PHP [default]
This package provides a DOM, SimpleXML, WDDX, XML, and XSL module for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
.
This package is a dependency package, which depends on Debian's default
PHP version (currently 7.0).
Package: dovecot-sieve
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 1718
Maintainer: Dovecot Maintainers <jaldhar-dovecot@debian.org>
Architecture: amd64
Source: dovecot
Version: 1:2.2.27-3+deb9u7
Replaces: dovecot-core (<= 1:2.2.13-6), dovecot-imapd (<< 1:2.2.26.0-1~)
Depends: dovecot-core (= 1:2.2.27-3+deb9u7), libc6 (>= 2.14), ucf (>= 2.0020)
Breaks: dovecot-core (<= 1:2.2.13-6), dovecot-imapd (<< 1:2.2.26.0-1~)
Description: secure POP3/IMAP server - Sieve filters support
Dovecot is a mail server whose major goals are security and extreme
reliability. It tries very hard to handle all error conditions and verify
that all data is valid, making it nearly impossible to crash. It supports
mbox/Maildir and its own dbox/mdbox formats, and should also be pretty
fast, extensible, and portable.
.
This package provides Sieve filters support for Dovecot.
Homepage: http://dovecot.org/
Package: libxml2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 2131
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 2.9.4+dfsg1-2.2+deb9u7
Depends: libc6 (>= 2.15), libicu57 (>= 57.1-1~), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.3.3)
Recommends: xml-core
Description: GNOME XML library
XML is a metalanguage to let you design your own markup language.
A regular markup language defines a way to describe information in
a certain class of documents (eg HTML). XML lets you define your
own customized markup languages for many classes of document. It
can do this because it's written in SGML, the international standard
metalanguage for markup languages.
.
This package provides a library providing an extensive API to handle
such XML data files.
Homepage: http://xmlsoft.org/
Package: qemu-utils
Status: install ok installed
Priority: optional
Section: otherosfs
Installed-Size: 6669
Maintainer: Debian QEMU Team <pkg-qemu-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: qemu
Version: 1:2.8+dfsg-6+deb9u17
Depends: libaio1 (>= 0.3.93), libc6 (>= 2.15), libgcc1 (>= 1:3.4), libglib2.0-0 (>= 2.37.1), libgnutls30 (>= 3.5.6), libnettle6, zlib1g (>= 1:1.1.4)
Suggests: debootstrap, qemu-block-extra (= 1:2.8+dfsg-6+deb9u17)
Description: QEMU utilities
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
SPARC and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides QEMU related utilities:
* qemu-img: QEMU disk image utility
* qemu-io: QEMU disk exerciser
* qemu-nbd: QEMU disk network block device server
Homepage: http://www.qemu.org/
Package: zip
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 608
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: zip (3.0-11)
Version: 3.0-11+b1
Depends: libbz2-1.0, libc6 (>= 2.14)
Recommends: unzip
Description: Archiver for .zip files
This is InfoZIP's zip program. It produces files that are fully
compatible with the popular PKZIP program; however, the command line
options are not identical. In other words, the end result is the same,
but the methods differ. :-)
.
This version supports encryption.
Homepage: http://www.info-zip.org/Zip.html
Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 367
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Depends: libc6 (>= 2.17), libuuid1 (>= 2.16)
Description: block device ID library
The blkid library allows system programs such as fsck and mount to
quickly and easily find block devices by filesystem UUID or label.
This allows system administrators to avoid specifying filesystems by
hard-coded device names and use a logical naming system instead.
Package: libirs141
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 238
Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u12
Replaces: libbind0
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10), libdns162, libgeoip1, libisc160, libisccfg140, libssl1.0.2 (>= 1.0.2d), libxml2 (>= 2.6.27)
Conflicts: libbind0, libbind9-41
Description: DNS Shared Library used by BIND
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the libirs shared library used by BIND's daemons and
clients.
Package: python3-markupsafe
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 61
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: amd64
Source: markupsafe
Version: 0.23-3
Depends: python3 (<< 3.6), python3 (>= 3.5~), python3:any (>= 3.3.2-2~), libc6 (>= 2.14)
Description: HTML/XHTML/XML string library for Python 3
MarkupSafe is a Python library implementing a unicode subclass that is
aware of HTML escaping rules. It can be used to implement automatic
string escaping.
.
This package contains the Python 3 version.
Homepage: https://pypi.python.org/pypi/MarkupSafe
Package: zoo
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 137
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Version: 2.10-28
Depends: libc6 (>= 2.14)
Description: manipulate zoo archives
Zoo is used to create and maintain collections of files in compressed
form. It uses a Lempel-Ziv compression algorithm that gives space
savings in the range of 20% to 80% depending on the type of file data.
Zoo can store and selectively extract multiple generations of the same
file.
.
This package exists for its historical value. If you are looking for
a compression tool for serious use, check tar and gzip.
Homepage: http://www.ibiblio.org/pub/packages/ccic/software/unix/utils/
Package: liblognorm5
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 158
Maintainer: Pierre Chifflier <pollux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: liblognorm (2.0.1-1.1)
Version: 2.0.1-1.1+b1
Depends: libc6 (>= 2.14), libestr0 (>= 0.1.0), libfastjson4 (>= 0.99.3)
Description: log normalizing library
Liblognorm is an event and log normalization library that is capable of
real-time processing. It provides the capability to normalize events to
a set of standard formats.
.
This package contains the shared library.
Homepage: http://www.liblognorm.com/
Package: ibritish
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 203
Maintainer: Robert Luberda <robert@debian.org>
Architecture: all
Source: ispell
Version: 3.4.00-5
Provides: ispell-dictionary
Depends: ienglish-common (= 3.4.00-5), dictionaries-common (>= 1.23~), ispell, debconf (>= 0.5) | debconf-2.0
Suggests: wbritish
Description: British English dictionary for ispell (standard version)
This package provides the standard, medium-sized British English dictionary,
based on the britishmed+ dictionary supplied with the source for ispell, with
additional words added from the more comprehensive wbritish word list package.
.
There are also -small, -large, -huge, and -insane versions of this dictionary,
and there are iamerican* packages as well.
.
The package also suggests wbritish because ispell's (L)ookup command
needs a word list.
Homepage: http://www.lasr.cs.ucla.edu/geoff/ispell.html
Package: libhtml-tree-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 489
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 5.03-2
Depends: perl, libhtml-parser-perl, libhtml-tagset-perl
Recommends: libhtml-format-perl, libwww-perl
Description: Perl module to represent and create HTML syntax trees
HTML::Tree is a collection of modules that represent, create and extract
information from HTML syntax trees. These modules used to be part of
the libwww-perl distribution, but are now unbundled in order to
facilitate a separate development track.
Homepage: https://metacpan.org/release/HTML-Tree
Package: php7.0-fpm
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 4361
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-fpm, phpapi-20151012
Depends: libmagic1, libpcre3 (>= 1:8.20), mime-support, php7.0-cli, php7.0-common (= 7.0.33-0+deb9u12), php7.0-json, php7.0-opcache, procps, tzdata, ucf, init-system-helpers (>= 1.18~), libapparmor1 (>= 2.7.0~beta1+bzr1772), libc6 (>= 2.15), libssl1.1 (>= 1.1.0), libsystemd0, libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Conffiles:
/etc/apache2/conf-available/php7.0-fpm.conf 58b611074fe30e56b9afbe705565f5ff
/etc/init.d/php7.0-fpm 0d37a572f6513e8f39b233b39ba52fda
/etc/init/php7.0-fpm.conf 7a8c62fdc5ee3ebb423f42558c65430f
/etc/logrotate.d/php7.0-fpm 64482139634c97f1d0e6e3ed8efd3f8c
/etc/php/7.0/fpm/php-fpm.conf d3455864e11f659b5b839acb64fc5531
/etc/php/7.0/fpm/pool.d/www.conf 638226002586724ceeef8cbc76ae9146
Description: server-side, HTML-embedded scripting language (FPM-CGI binary)
This package provides the Fast Process Manager interpreter that runs
as a daemon and receives Fast/CGI requests. Note that MOST Apache users
probably want the libapache2-mod-php7.0 package.
.
The following extensions are built in: Core date filter hash libxml openssl
pcre Reflection session SPL standard zlib.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libmhash2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 217
Maintainer: Chris Hanson <cph@debian.org>
Architecture: amd64
Multi-Arch: same
Source: mhash
Version: 0.9.9.9-7
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Library for cryptographic hashing and message authentication
Mhash is a library that provides a uniform interface to a large
number of hash algorithms. These algorithms can be used to compute
checksums, message digests, and other signatures. The HMAC support
implements the basics for message authentication, following RFC 2104.
Mhash also provides several key-generation algorithms, including
those of OpenPGP (RFC 2440).
.
This package contains the shared library.
Homepage: http://mhash.sourceforge.net/
Package: gcc-6
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 25114
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Version: 6.3.0-18+deb9u1
Replaces: gccgo-6 (<< 6.3.0-18+deb9u1)
Provides: c-compiler
Depends: cpp-6 (= 6.3.0-18+deb9u1), gcc-6-base (= 6.3.0-18+deb9u1), libcc1-0 (>= 6.3.0-18+deb9u1), binutils (>= 2.28), libgcc-6-dev (= 6.3.0-18+deb9u1), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libgmp10 (>= 2:5.0.1~), libisl15 (>= 0.15), libmpc3, libmpfr4 (>= 3.1.3), libstdc++6 (>= 5), zlib1g (>= 1:1.1.4)
Recommends: libc6-dev (>= 2.13-5)
Suggests: gcc-6-multilib, gcc-6-doc (>= 6.3.0-1), gcc-6-locales (>= 6.3.0-1), libgcc1-dbg (>= 1:6.3.0-18+deb9u1), libgomp1-dbg (>= 6.3.0-18+deb9u1), libitm1-dbg (>= 6.3.0-18+deb9u1), libatomic1-dbg (>= 6.3.0-18+deb9u1), libasan3-dbg (>= 6.3.0-18+deb9u1), liblsan0-dbg (>= 6.3.0-18+deb9u1), libtsan0-dbg (>= 6.3.0-18+deb9u1), libubsan0-dbg (>= 6.3.0-18+deb9u1), libcilkrts5-dbg (>= 6.3.0-18+deb9u1), libmpx2-dbg (>= 6.3.0-18+deb9u1), libquadmath0-dbg (>= 6.3.0-18+deb9u1)
Description: GNU C compiler
This is the GNU C compiler, a fairly portable optimizing compiler for C.
Homepage: http://gcc.gnu.org/
Package: libfreetype6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 898
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: freetype
Version: 2.6.3-3.2+deb9u2
Depends: libc6 (>= 2.14), libpng16-16 (>= 1.6.2-1), zlib1g (>= 1:1.1.4)
Description: FreeType 2 font engine, shared library files
The FreeType project is a team of volunteers who develop free,
portable and high-quality software solutions for digital typography.
They specifically target embedded systems and focus on bringing small,
efficient and ubiquitous products.
.
The FreeType 2 library is their new software font engine. It has been
designed to provide the following important features:
* A universal and simple API to manage font files
* Support for several font formats through loadable modules
* High-quality anti-aliasing
* High portability & performance
.
Supported font formats include:
* TrueType files (.ttf) and collections (.ttc)
* Type 1 font files both in ASCII (.pfa) or binary (.pfb) format
* Type 1 Multiple Master fonts. The FreeType 2 API also provides
routines to manage design instances easily
* Type 1 CID-keyed fonts
* OpenType/CFF (.otf) fonts
* CFF/Type 2 fonts
* Adobe CEF fonts (.cef), used to embed fonts in SVG documents with
the Adobe SVG viewer plugin.
* Windows FNT/FON bitmap fonts
.
This package contains the files needed to run programs that use the
FreeType 2 library.
.
Home Page: http://www.freetype.org/
Authors: David Turner <david.turner@freetype.org>
Robert Wilhelm <robert.wilhelm@freetype.org>
Werner Lemberg <werner.lemberg@freetype.org>
Homepage: http://www.freetype.org
Package: libtasn1-6
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 112
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 4.10-1.1+deb9u1
Depends: libc6 (>= 2.14)
Description: Manage ASN.1 structures (runtime)
Manage ASN1 (Abstract Syntax Notation One) structures.
The main features of this library are:
* on-line ASN1 structure management that doesn't require any C code
file generation.
* off-line ASN1 structure management with C code file generation
containing an array.
* DER (Distinguish Encoding Rules) encoding
* no limits for INTEGER and ENUMERATED values
.
This package contains runtime libraries.
Homepage: http://www.gnu.org/software/libtasn1/
Package: libmagic-mgc
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 4832
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: amd64
Multi-Arch: foreign
Source: file
Version: 1:5.30-1+deb9u3
Replaces: libmagic1 (<< 1:5.28-4~)
Breaks: libmagic1 (<< 1:5.28-4~)
Description: File type determination library using "magic" numbers (compiled magic file)
This package provides the compiled magic file "magic.mgc". It has
been separated from libmagic1 in order to meet the multiarch
requirements without breaking applications that expect this file
at its absolute path.
Homepage: http://www.darwinsys.com/file/
Package: python-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 145
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python-defaults
Version: 2.7.13-2
Replaces: python (<= 2.7.3-1~)
Depends: python2.7-minimal (>= 2.7.13-1~), dpkg (>= 1.13.20)
Recommends: python
Breaks: idle (<< 2.6), python (<= 2.7.3-1~), python-all (<< 2.6), python-all-dbg (<< 2.6), python-all-dev (<< 2.6), python-dbg (<< 2.6), python-dev (<< 2.6), python-examples (<< 2.6), python-support (<< 1.0.10ubuntu2), python2.5-minimal (<< 2.5.5-7), python2.6-minimal (<< 2.6.5~rc2-2), python3.1-minimal (<< 3.1.2~rc1-2)
Conflicts: python-central (<< 0.5.5)
Description: minimal subset of the Python language (default version)
This package contains the interpreter and some essential modules. It's used
in the boot process for some basic tasks.
See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules
contained in this package.
Homepage: http://www.python.org/
Package: linux-image-4.9.0-5-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 185320
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux
Version: 4.9.65-3+deb9u2
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, irqbalance
Suggests: linux-doc-4.9, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: initramfs-tools (<< 0.120+deb8u2), xserver-xorg-input-vmmouse (<< 1:13.0.99)
Description: Linux 4.9 for 64-bit PCs
The Linux kernel 4.9 and modules for use on PCs with AMD64, Intel 64 or
VIA Nano processors.
.
This kernel also runs on a Xen hypervisor. It supports both privileged
(dom0) and unprivileged (domU) operation.
Homepage: https://www.kernel.org/
Package: isc-dhcp-client
Status: install ok installed
Priority: important
Section: net
Installed-Size: 649
Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Architecture: amd64
Source: isc-dhcp
Version: 4.3.5-3+deb9u2
Provides: dhcp-client
Depends: libc6 (>= 2.15), libdns-export162, libisc-export160, debianutils (>= 2.8.2), iproute2
Recommends: isc-dhcp-common
Suggests: resolvconf, avahi-autoipd, isc-dhcp-client-ddns
Conffiles:
/etc/dhcp/debug 521717b5f9e08db15893d3d062c59aeb
/etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes 95e21c32fa7f603db75f1dc33db53cf5
/etc/dhcp/dhclient.conf 649563ef7a61912664a400a5263958a6
Description: DHCP client for automatically obtaining an IP address
This is the Internet Software Consortium's DHCP client.
.
Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP
(actually dhcpd includes much of the functionality of bootpd). It
gives client machines "leases" for IP addresses and can
automatically set their network configuration. If your machine
depends on DHCP (especially likely if it's a workstation on a large
network, or a laptop, or attached to a cable modem), keep this or
another DHCP client installed.
.
Extra documentation can be found in the package isc-dhcp-common.
Homepage: http://www.isc.org
Package: bzip2
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 184
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.0.6-8.1
Replaces: libbz2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.6-8.1), libc6 (>= 2.14)
Suggests: bzip2-doc
Description: high-quality block-sorting file compressor - utilities
bzip2 is a freely available, patent free, high-quality data compressor.
It typically compresses files to within 10% to 15% of the best available
techniques, whilst being around twice as fast at compression and six
times faster at decompression.
.
bzip2 compresses files using the Burrows-Wheeler block-sorting text
compression algorithm, and Huffman coding. Compression is generally
considerably better than that achieved by more conventional
LZ77/LZ78-based compressors, and approaches the performance of the PPM
family of statistical compressors.
.
The archive file format of bzip2 (.bz2) is incompatible with that of its
predecessor, bzip (.bz).
Homepage: http://www.bzip.org/
Package: php7.0-recode
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 39
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-recode
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc6 (>= 2.14), librecode0 (>= 3.6)
Description: recode module for PHP
This package provides the recode module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: pure-ftpd-mysql
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 546
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Architecture: amd64
Source: pure-ftpd
Version: 1.0.43-3
Replaces: ftp-server, pure-ftpd
Provides: ftp-server, pure-ftpd
Depends: lsb-base (>= 3.2-14), pure-ftpd-common (= 1.0.43-3), libc6 (>= 2.15), libcap2 (>= 1:2.10), libmariadbclient18 (>= 5.5.36), libpam0g (>= 0.99.7.1), libssl1.1 (>= 1.1.0), zlib1g (>= 1:1.1.4), openbsd-inetd | inet-superserver
Conflicts: ftp-server, pure-ftpd
Conffiles:
/etc/ftpusers 5792584369edcb3791c57cae7978572e
/etc/init.d/pure-ftpd-mysql 665e3023ca413c1126ec63d988ba81f7
/etc/pure-ftpd/conf/MySQLConfigFile dda8b51f9977c2338080cba8ad6dae45
/etc/pure-ftpd/db/mysql.conf 459bcd86737b7a7d7073ba6e7aea4932
Description: Secure and efficient FTP server with MySQL user authentication
Pure-FTPd is a fast, production-quality, standards-conformant FTP
server based upon Troll-FTPd. Features include chrooted home directories,
virtual domains, built-in 'ls', anti-warez system, configurable ports for
passive downloads, FXP protocol, bandwidth throttling, ratios,
fortune files, Apache-like log files, fast standalone mode, atomic uploads,
text / HTML / XML real-time status report, virtual users, virtual quotas,
privilege separation, SSL/TLS and more.
Homepage: http://www.pureftpd.org/
Package: libmagic1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 214
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: amd64
Multi-Arch: same
Source: file
Version: 1:5.30-1+deb9u3
Depends: libc6 (>= 2.15), zlib1g (>= 1:1.1.4), libmagic-mgc (= 1:5.30-1+deb9u3)
Suggests: file
Conffiles:
/etc/magic 272913026300e7ae9b5e2d51f138e674
/etc/magic.mime 272913026300e7ae9b5e2d51f138e674
Description: Recognize the type of data in a file using "magic" numbers - library
This library can be used to classify files according to magic number
tests. It implements the core functionality of the file command.
Homepage: http://www.darwinsys.com/file/
Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 49
Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 9.20161125
Description: Linux Standard Base init script functionality
The Linux Standard Base (http://www.linuxbase.org/) is a standard
core system that third-party applications written for Linux can
depend upon.
.
This package only includes the init-functions shell library, which
may be used by other packages' initialization scripts for console
logging and other purposes.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb
Package: libhogweed4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 232
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.3-1+deb9u1
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.0.0), libnettle6 (= 3.3-1+deb9u1)
Description: low level cryptographic library (public-key cryptos)
Nettle is a cryptographic library that is designed to fit easily in more or
less any context: In crypto toolkits for object-oriented languages (C++,
Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
space.
.
It tries to solve a problem of providing a common set of cryptographic
algorithms for higher-level applications by implementing a
context-independent set of cryptographic algorithms. In that light, Nettle
doesn't do any memory allocation or I/O, it simply provides the
cryptographic algorithms for the application to use in any environment and
in any way it needs.
.
This package contains the asymmetric cryptographic algorithms, which,
require the GNU multiple precision arithmetic library (libgmp) for
their large integer computations.
Homepage: http://www.lysator.liu.se/~nisse/nettle/
Package: rsync
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 687
Maintainer: Paul Slootman <paul@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.1.2-1+deb9u3
Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.15), libpopt0 (>= 1.14), lsb-base (>= 3.2-14), base-files (>= 4.0.1), init-system-helpers (>= 1.18~)
Suggests: openssh-client, openssh-server
Breaks: duplicity (<< 0.6.11)
Conffiles:
/etc/init.d/rsync c5d89677f904551f5b192f35ad98d73c
/etc/default/rsync b8fd9efa75e2bda2583b0d7c0892a073
Description: fast, versatile, remote (and local) file-copying tool
rsync is a fast and versatile file-copying tool which can copy locally
and to/from a remote host. It offers many options to control its behavior,
and its remote-update protocol can minimize network traffic to make
transferring updates between machines fast and efficient.
.
It is widely used for backups and mirroring and as an improved copy
command for everyday use.
.
This package provides both the rsync command line tool and optional
daemon functionality.
Homepage: http://rsync.samba.org/
Package: python3.5-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 9421
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3.5
Version: 3.5.3-1+deb9u5
Depends: libpython3.5-minimal (= 3.5.3-1+deb9u5), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.17)
Recommends: python3.5
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 3.5)
This package contains the interpreter and some essential modules. It can
be used in the boot process for some basic tasks.
See /usr/share/doc/python3.5-minimal/README.Debian for a list of the modules
contained in this package.
Package: liblsan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 308
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.3), libgcc1 (>= 1:3.3), libstdc++6 (>= 4.1.1)
Description: LeakSanitizer -- a memory leak detector (runtime)
LeakSanitizer (Lsan) is a memory leak detector which is integrated
into AddressSanitizer.
Homepage: http://gcc.gnu.org/
Package: procps
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 690
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2:3.3.12-3+deb9u1
Provides: watch
Depends: libc6 (>= 2.15), libncurses5 (>= 6), libncursesw5 (>= 6), libprocps6, libtinfo5 (>= 6), lsb-base (>= 3.0-10), init-system-helpers (>= 1.29~)
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), open-vm-tools (<= 2011.12.20-562307-1)
Conflicts: pgrep (<< 3.3-5), w-bassman (<< 1.0-3)
Conffiles:
/etc/init.d/procps 49fbfd237be2a2f09576f1f9374580be
/etc/sysctl.conf 36547fde818f251846b0198564060927
/etc/sysctl.d/README.sysctl 026e08987e39bd612ae311f2d9fc2089
Description: /proc file system utilities
This package provides command line and full screen utilities for browsing
procfs, a "pseudo" file system dynamically generated by the kernel to
provide information about the status of entries in its process table
(such as whether the process is running, stopped, or a "zombie").
.
It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: https://gitlab.com/procps-ng/procps
Package: libcroco3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 329
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcroco
Version: 0.6.11-3
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.16.0), libxml2 (>= 2.7.4)
Description: Cascading Style Sheet (CSS) parsing and manipulation toolkit
Services provided by Libcroco
* A parser module that provides
o A SAC like API. SAC stands for Simple API for CSS. SAC is an event driven
API which resembles SAX in the xml world.
o A CSSOM like API. CSSOM stands for Cascading Style Sheet Object Model.
.
The libcroco parser implements the CSS Level 2 specification, the CSS
forward compatibility rules and the CSS cascading rules.
.
* A CSS2 selection engine
Given an xml element node (that obviously comes from an xml document) and
a stylesheet cascade, the Libcroco selection engine can evaluate the css
selectors of the cascade and return the style properties associated to
the xml element node.
.
Note that the xml manipulation toolkit used by the libcroco selection
engine at the moment is libxml2.
.
This package contains the shared libraries.
Package: php-composer-semver
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 60
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Version: 1.4.2-1
Depends: php-common
Description: utilities, version constraint parsing and validation
The semver (Semantic Versioning) library has been split away from Composer.
.
Composer helps you declare, manage and install dependencies of PHP projects,
ensuring you have the right stack everywhere.
Homepage: https://github.com/composer/semver
Package: libgssapi-krb5-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 423
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.15-1+deb9u3
Depends: libc6 (>= 2.14), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.8+dfsg), libkeyutils1 (>= 1.4), libkrb5-3 (= 1.15-1+deb9u3), libkrb5support0 (>= 1.15~beta1)
Suggests: krb5-doc, krb5-user
Breaks: libgssglue1 (<< 0.2-2)
Conffiles:
/etc/gss/mech.d/README 27e753ba1dc72900d2892b8efef6e35e
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
Kerberos is a system for authenticating users and services on a network.
Kerberos is a trusted third-party service. That means that there is a
third party (the Kerberos server) that is trusted by all the entities on
the network (users and services, usually called "principals").
.
This is the MIT reference implementation of Kerberos V5.
.
This package contains the runtime library for the MIT Kerberos
implementation of GSS-API used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Package: linux-image-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 16
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-latest (80+deb9u3)
Version: 4.9+80+deb9u3
Provides: linux-latest-modules-4.9.0-5-amd64
Depends: linux-image-4.9.0-5-amd64
Description: Linux for 64-bit PCs (meta-package)
This package depends on the latest Linux kernel and modules for use on PCs
with AMD64, Intel 64 or VIA Nano processors.
.
This kernel also runs on a Xen hypervisor. It supports both privileged
(dom0) and unprivileged (domU) operation.
Package: libxslt1.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 481
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxslt
Version: 1.1.29-2.1+deb9u2
Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.7.0), libxml2 (>= 2.9.0)
Description: XSLT 1.0 processing library - runtime library
XSLT is an XML language for defining transformations of XML files from
XML to some other arbitrary format, such as XML, HTML, plain text, etc.
using standard XSLT stylesheets. libxslt is a C library which
implements XSLT version 1.0.
.
This package contains the libxslt library used by applications for XSLT
transformations.
Homepage: http://xmlsoft.org/xslt/
Package: g++-6
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 23930
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Source: gcc-6
Version: 6.3.0-18+deb9u1
Provides: c++-compiler, c++abi2-dev
Depends: gcc-6-base (= 6.3.0-18+deb9u1), gcc-6 (= 6.3.0-18+deb9u1), libstdc++-6-dev (= 6.3.0-18+deb9u1), libc6 (>= 2.14), libgmp10 (>= 2:5.0.1~), libisl15 (>= 0.15), libmpc3, libmpfr4 (>= 3.1.3), zlib1g (>= 1:1.1.4)
Suggests: g++-6-multilib, gcc-6-doc (>= 6.3.0-1), libstdc++6-6-dbg (>= 6.3.0-18+deb9u1)
Description: GNU C++ compiler
This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
Homepage: http://gcc.gnu.org/
Package: perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 651
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Multi-Arch: allowed
Version: 5.24.1-3+deb9u7
Replaces: perl-modules (<< 5.22.0~)
Depends: perl-base (= 5.24.1-3+deb9u7), perl-modules-5.24 (>= 5.24.1-3+deb9u7), libperl5.24 (= 5.24.1-3+deb9u7)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: netbase, rename
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make
Breaks: libperl-dev (<< 5.24.0~), perl-doc (<< 5.24.1-1)
Conflicts: libjson-pp-perl (<< 2.27200-2)
Conffiles:
/etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733
/etc/perl/sitecustomize.pl 302a28e42802e654386c5938548155a7
Description: Larry Wall's Practical Extraction and Report Language
Perl is a highly capable, feature-rich programming language with over
20 years of development. Perl 5 runs on over 100 platforms from
portables to mainframes. Perl is suitable for both rapid prototyping
and large scale development projects.
.
Perl 5 supports many programming styles, including procedural,
functional, and object-oriented. In addition to this, it is supported
by an ever-growing collection of reusable modules which accelerate
development. Some of these modules include Web frameworks, database
integration, networking protocols, and encryption. Perl provides
interfaces to C and C++ for custom extension development.
Homepage: http://dev.perl.org/perl5/
Package: libgpg-error0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 572
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgpg-error
Version: 1.26-2
Depends: libc6 (>= 2.15)
Description: library for common error values and messages in GnuPG components
Library that defines common error values for all GnuPG
components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
pinentry, SmartCard Daemon and possibly more in the future.
Homepage: https://www.gnupg.org/related_software/libgpg-error/
Package: haveged
Status: install ok installed
Priority: extra
Section: misc
Installed-Size: 76
Maintainer: Jérémy Bobbio <lunar@debian.org>
Architecture: amd64
Version: 1.9.1-5+deb9u1
Depends: lsb-base (>= 3.2-14), libc6 (>= 2.15), libhavege1 (>= 1.9.0), init-system-helpers (>= 1.18~)
Suggests: apparmor
Conffiles:
/etc/apparmor.d/usr.sbin.haveged 3d723671ac558ff3b59f567d4b64b2fa
/etc/default/haveged e6a46a4a309fdb4f772df60a63dfe63c
/etc/init.d/haveged 31ced0bebd90450344174b95765d55f7
Description: Linux entropy source using the HAVEGE algorithm
haveged is a userspace entropy daemon which is not dependent upon the
standard mechanisms for harvesting randomness for the system entropy
pool. This is important in systems with high entropy needs or limited
user interaction (e.g. headless servers).
.
haveged uses HAVEGE (HArdware Volatile Entropy Gathering and Expansion)
to maintain a 1M pool of random bytes used to fill /dev/random
whenever the supply of random bits in dev/random falls below the low
water mark of the device.
.
More information about HAVEGE is available at
http://www.irisa.fr/caps/projects/hipsor/
Homepage: http://issihosts.com/haveged/
Package: libzip4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 101
Maintainer: Fathi Boudra <fabo@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libzip
Version: 1.1.2-1.1+deb9u1
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Description: library for reading, creating, and modifying zip archives (runtime)
libzip is a C library for reading, creating, and modifying zip archives. Files
can be added from data buffers, files, or compressed data copied directly from
other zip archives. Changes made without closing the archive can be reverted.
.
This package contains the files necessary for running applications that
use the libzip library.
Homepage: http://www.nih.at/libzip/
Package: libio-multiplex-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 90
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.16-1
Depends: perl
Description: object-oriented interface to select() for Perl
IO::Multiplex is designed to take the effort out of managing
multiple file handles. It is essentially a really fancy front end to
the select() system call. In addition to maintaining the select()
loop, it buffers all input and output to/from the file handles. It
can also accept incoming connections on one or more listen sockets.
Homepage: https://metacpan.org/release/IO-Multiplex
Package: python3-blinker
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 79
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: blinker
Version: 1.3.dfsg2-1
Depends: python3:any (>= 3.3.2-2~)
Suggests: python-blinker-doc
Description: fast, simple object-to-object and broadcast signaling library
Blinker provides a fast dispatching system that allows any number of
interested parties to subscribe to events, or "signals".
.
Signal receivers can subscribe to specific senders or receive signals
sent by any sender.
.
This package contains the Python 3 version.
Homepage: http://pythonhosted.org/blinker/
Package: linux-image-4.9.0-4-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 185396
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux
Version: 4.9.65-3+deb9u1
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, irqbalance
Suggests: linux-doc-4.9, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: initramfs-tools (<< 0.120+deb8u2), xserver-xorg-input-vmmouse (<< 1:13.0.99)
Description: Linux 4.9 for 64-bit PCs
The Linux kernel 4.9 and modules for use on PCs with AMD64, Intel 64 or
VIA Nano processors.
.
This kernel also runs on a Xen hypervisor. It supports both privileged
(dom0) and unprivileged (domU) operation.
Homepage: https://www.kernel.org/
Package: libsys-hostname-long-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 68
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.5-1
Depends: perl
Description: Figure out the long (fully-qualified) hostname
Sys::Hostname::Long determines the host full name on multiple
operating systems (MacOS, Windows, Unix-like systems; more later.)
.
The Sys::Hostname class is the best and standard way to get the basic
hostname, but that may not be fully qualified. This module tries to
determine the host's fully qualified name.
Homepage: https://metacpan.org/release/Sys-Hostname-Long
Package: libpython-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 37
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python-defaults
Version: 2.7.13-2
Depends: libpython2.7-stdlib (>= 2.7.13-1~)
Description: interactive high-level object-oriented language (default python version)
Python, the high-level, interactive object oriented language,
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package is a dependency package, which depends on Debian's default
Python version (currently v2.7).
Homepage: http://www.python.org/
Package: phpmyadmin
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 24176
Maintainer: Thijs Kinkhorst <thijs@debian.org>
Architecture: all
Version: 4:4.6.6-4+deb9u2
Depends: php, php-cli, php-mysql, php-json, php-mbstring, php-xml, perl, debconf (>= 0.5) | debconf-2.0, libjs-sphinxdoc (>= 1.0), dbconfig-mysql | dbconfig-no-thanks | dbconfig-common (<< 2.0.0), php-php-gettext | php-gettext (<= 1:7.0), php-phpseclib (>= 2.0), ucf (>= 0.28)
Recommends: apache2 | lighttpd | httpd, php-curl, php-gd, php-bz2, php-zip, php-tcpdf
Suggests: default-mysql-server | virtual-mysql-server, www-browser
Conffiles:
/etc/phpmyadmin/apache.conf 2d0094be4646fe4031e683ea60419857
/etc/phpmyadmin/config.footer.inc.php f59a8fe4a05431392ad1ef4e0b36278f
/etc/phpmyadmin/config.header.inc.php ff471619d3280ef72b7b0641bab4ba27
/etc/phpmyadmin/config.inc.php 0452730c77ec8981f535d527bd269fb3
/etc/phpmyadmin/lighttpd.conf 3e7e4a3fab409c22d98770d2ea52dbfc
/etc/phpmyadmin/phpmyadmin.desktop 18948893751469fa6a6a910db9714909
/etc/phpmyadmin/phpmyadmin.service f79a2a07e93b221f646a75e894496ef0
Description: MySQL web administration tool
This package allows administering of MySQL or MariaDB with a web interface.
.
It allows administrators to:
- browse through databases and tables;
- create, copy, rename, alter and drop databases;
- create, copy, rename, alter and drop tables;
- perform table maintenance;
- add, edit and drop fields;
- execute any SQL-statement, even multiple queries;
- create, alter and drop indexes;
- load text files into tables;
- create and read dumps of tables or databases;
- export data to SQL, CSV, XML, Word, Excel, PDF and LaTeX formats;
- administer multiple servers;
- manage MySQL users and privileges;
- check server settings and runtime information with configuration hints;
- check referential integrity in MyISAM tables;
- create complex queries using Query-by-example (QBE), automatically
connecting required tables;
- create PDF graphics of database layout;
- search globally in a database or a subset of it;
- transform stored data into any format using a set of predefined
functions, such as displaying BLOB-data as image or download-link;
- manage InnoDB tables and foreign keys;
and is fully internationalized and localized in dozens of languages.
Homepage: https://www.phpmyadmin.net/
Package: python3-prettytable
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 67
Maintainer: Sandro Tosi <morph@debian.org>
Architecture: all
Source: prettytable
Version: 0.7.2-3
Depends: python3:any (>= 3.3.2-2~)
Description: library to represent tabular data in visually appealing ASCII tables (Python3)
PrettyTable is a simple Python library designed to make it quick and
easy to represent tabular data in visually appealing ASCII tables. It
was inspired by the ASCII tables used in the PostgreSQL shell
psql. PrettyTable allows for selection of which columns are to be
printed, independent alignment of columns (left or right justified or
centred) and printing of "sub-tables" by specifying a row range.
.
This package contains the Python 3 version of prettytable.
Homepage: http://code.google.com/p/prettytable/
Package: libconvert-uulib-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 237
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libconvert-uulib-perl (1:1.4~dfsg-1)
Version: 1:1.4~dfsg-1+b5
Depends: perl (>= 5.24.1~rc3-2), perlapi-5.24.1, libc6 (>= 2.14)
Description: Perl interface to the uulib library (a.k.a. uudeview/uuenview)
Convert::UUlib is a versatile and powerful decoder/encoder library
for a variety of encodings used in Usenet and Mail (uuencode,
xxencode, b64, binhex...).
.
The library contains a variety of heuristics to reliably decode
any files found in the input files, whether part of a single
mail folder or spread over hundreds of files. Its two-pass
architecture makes it possible to decode hundreds of megabytes in
one sweep, without using much virtual memory.
Homepage: http://search.cpan.org/dist/Convert::UUlib/
Package: libssl1.0.2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3565
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openssl1.0
Version: 1.0.2u-1~deb9u7
Depends: libc6 (>= 2.17), debconf (>= 0.5) | debconf-2.0
Description: Secure Sockets Layer toolkit - shared libraries
This package is part of the OpenSSL project's implementation of the SSL
and TLS cryptographic protocols for secure communication over the
Internet.
.
It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org
Package: php7.0-zip
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 87
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-zip
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc6 (>= 2.14), libzip4 (>= 1.0), zlib1g (>= 1:1.1.4)
Description: Zip module for PHP
This package provides the Zip module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libcrypt-openssl-rsa-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 77
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 0.28-5
Depends: libc6 (>= 2.4), libssl1.1 (>= 1.1.0), perl (>= 5.24.1~rc4-1), perl-openssl-abi-1.1, perlapi-5.24.1, libcrypt-openssl-bignum-perl
Description: module for RSA encryption using OpenSSL
Crypt::OpenSSL::RSA is a Perl module that provides glue to the RSA functions
in the OpenSSL library. It provides the following functionalities: create a
key from a string, make a new key, save key to a string, save public portion
of key to a string using format compatible with OpenSSL's command-line rsa
tool, encrypt, decrypt, sign, verify, return the size in bytes of a key,
check the validity of a key.
Homepage: http://perl-openssl.sourceforge.net/
Package: nano
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 2043
Maintainer: Jordi Mallach <jordi@debian.org>
Architecture: amd64
Version: 2.7.4-1
Replaces: pico
Provides: editor
Depends: libc6 (>= 2.14), libncursesw5 (>= 6), libtinfo5 (>= 6), zlib1g (>= 1:1.1.4)
Suggests: spell
Conflicts: pico
Conffiles:
/etc/nanorc 6588e341cab04ea968b003c0ad862880
Description: small, friendly text editor inspired by Pico
GNU nano is an easy-to-use text editor originally designed as a replacement
for Pico, the ncurses-based editor from the non-free mailer package Pine
(itself now available under the Apache License as Alpine).
.
However, GNU nano also implements many features missing in pico, including:
- feature toggles;
- interactive search and replace (with regular expression support);
- go to line (and column) command;
- auto-indentation and color syntax-highlighting;
- filename tab-completion and support for multiple buffers;
- full internationalization support.
Homepage: https://www.nano-editor.org/
Package: libhavege1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 121
Maintainer: Jérémy Bobbio <lunar@debian.org>
Architecture: amd64
Multi-Arch: same
Source: haveged
Version: 1.9.1-5+deb9u1
Depends: libc6 (>= 2.14)
Description: entropy source using the HAVEGE algorithm - shared library
libhavege is a library that implements the HAVEGE (HArdware Volatile Entropy
Gathering and Expansion). It provides a random number generator and it's
associated tuning and testing factilities.
.
More information about HAVEGE is available at
http://www.irisa.fr/caps/projects/hipsor/
.
This package contains the shared library.
Homepage: http://issihosts.com/haveged/
Package: libconvert-tnef-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 78
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.18-1
Depends: perl, libio-stringy-perl, libmime-tools-perl
Description: Perl module to read TNEF files
TNEF stands for Transport Neutral Encapsulation Format, and if you've
ever been unfortunate enough to receive one of these files as an email
attachment, you may want to use this module.
Homepage: http://search.cpan.org/dist/Convert-TNEF/
Package: intltool-debian
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 109
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Version: 0.35.0+20060710.4
Depends: perl, gettext
Description: Help i18n of RFC822 compliant config files
Intltool is a bunch of scripts written by the GNOME project to
internationalize many different file formats. This package is
a slightly modified version which adds support for RFC822
compliant config files, e.g. Debconf templates files.
Package: python-cffi-backend
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 179
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: amd64
Source: python-cffi
Version: 1.9.1-2
Replaces: python-cffi (<< 1)
Provides: python-cffi-backend-api-9729, python-cffi-backend-api-max (= 10239), python-cffi-backend-api-min (= 9729)
Depends: python (<< 2.8), python (>= 2.7~), python:any (<< 2.8), python:any (>= 2.7~), libc6 (>= 2.14), libffi6 (>= 3.0.4)
Breaks: python-cffi (<< 1)
Description: Foreign Function Interface for Python calling C code - backend
Convenient and reliable way of calling C code from Python.
.
The aim of this project is to provide a convenient and reliable way of calling
C code from Python. It keeps Python logic in Python, and minimises the C
required. It is able to work at either the C API or ABI level, unlike most
other approaches, that only support the ABI level.
.
This package contains the runtime support for pre-built cffi modules.
Homepage: http://cffi.readthedocs.org/
Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 333
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 9.9+deb9u13
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
/etc/debian_version 0b5ec6628acace9bde943dce076cbc83
/etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
/etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6
/etc/issue 62dc6d46260360d4299e3a931afbdce5
/etc/issue.net 6589b08348fd877fd34398489f62caf0
/etc/update-motd.d/10-uname 9e1b832b7b06f566156e7c9e0548247b
Description: Debian base system miscellaneous files
This package contains the basic filesystem hierarchy of a Debian system, and
several important miscellaneous files, such as /etc/debian_version,
/etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
and the text of several common licenses in use on Debian systems.
Package: liblqr-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 117
Maintainer: Bernd Zeimetz <bzed@debian.org>
Architecture: amd64
Multi-Arch: same
Source: liblqr (0.4.2-2)
Version: 0.4.2-2+b2
Depends: libc6 (>= 2.2.5), libglib2.0-0 (>= 2.24.0)
Pre-Depends: multiarch-support
Description: converts plain array images into multi-size representation
The LiquidRescale (lqr) library provides a C/C++ API for performing
non-uniform resizing of images by the seam-carving technique.
.
The library takes images in plain array format as input and converts
them to a multi-size representation.
.
Following is a list of features:
.
* Areas in the image can be marked for preservation or discard
* Once the image has been fully processed, the scaling can be done
in real-time. In fact, the information can be saved and read out
later without any further processing
* The resizing is done with a single function which automatically
performs all the necessary operations; it can also work in
successive steps without wasting computational time
* Possibility to tune the carving operation by letting the seams be
less connected, or more rigid, or both
* Can export and import the visibility map (the seams)
* Other images can be attached and undergo the same carving process
as the parent image
* The automatic feature detection algorithm can be tuned by
selecting among different energy gradient functions
* Reports progress through a customizable interface
* A signalling system permits to cleanly handle errors
.
The library implements the algorithm described in the paper "Seam
Carving for Content-Aware Image Resizing" by Shai Avidan and Ariel
Shamir, which can be found at
http://www.faculty.idc.ac.il/arik/imret.pdf
.
This package contains the shared library.
Homepage: http://liblqr.wikidot.com/
Package: php7.0-xmlrpc
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 59
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-xmlrpc
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc6 (>= 2.14), libxml2 (>= 2.6.27), libxmlrpc-epi0
Description: XMLRPC-EPI module for PHP
This package provides the XMLRPC-EPI module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libxmlrpc-epi0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 98
Maintainer: Robin Cornelius <robin.cornelius@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: xmlrpc-epi
Version: 0.54.2-1.2
Depends: libc6 (>= 2.14), libexpat1 (>= 2.0.1)
Description: XML-RPC request serialisation/deserialisation library
A library that implements a transportless implementation of the XML-RPC
protocol.
Homepage: http://xmlrpc-epi.sourceforge.net/
Package: ruby-did-you-mean
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 50
Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.0.0-2
Description: smart error messages for Ruby > 2.3
This package provides the infrastructure to produce smart error messages on
Ruby > 2.3. When an undefined method is called, it will suggest similar
method names. It will also catch mispellings on known method names, such as
"initialize", and warn developers about them.
.
Starting with version 2.3, the Ruby interpreter will automatically load this
library on startup.
Homepage: https://github.com/yuki24/did_you_mean
Ruby-Versions: all
Package: libmpx2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 46
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Replaces: libmpx0 (<< 6-20160120-1)
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.17)
Description: Intel memory protection extensions (runtime)
Intel MPX is a set of processor features which, with compiler,
runtime library and OS support, brings increased robustness to
software by checking pointer references whose compile time normal
intentions are usurped at runtime due to buffer overflow.
Homepage: http://gcc.gnu.org/
Package: libisl15
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1864
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: isl
Version: 0.18-1
Depends: libc6 (>= 2.14), libgmp10
Description: manipulating sets and relations of integer points bounded by linear constraints
isl is a library for manipulating sets and relations of integer points
bounded by linear constraints. Supported operations on sets include
intersection, union, set difference, emptiness check, convex hull,
(integer) affine hull, integer projection, and computing the lexicographic
minimum using parametric integer programming. It also includes an ILP solver
based on generalized basis reduction.
.
This package contains the runtime library.
Homepage: http://isl.gforge.inria.fr/
Package: libyaml-0-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 140
Maintainer: Anders Kaseorg <andersk@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: libyaml
Version: 0.1.7-2
Depends: libc6 (>= 2.14)
Description: Fast YAML 1.1 parser and emitter library
LibYAML is a C library for parsing and emitting data in YAML 1.1, a
human-readable data serialization format.
Homepage: http://pyyaml.org/wiki/LibYAML
Package: libisccc140
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 235
Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u12
Replaces: libbind0
Depends: libc6 (>= 2.4), libcap2 (>= 1:2.10), libgeoip1, libisc160, libxml2 (>= 2.6.27)
Conflicts: libbind0, libbind9-41
Description: Command Channel Library used by BIND
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the libisccc shared library used by BIND's daemons
and clients, particularly rndc.
Package: libgmp10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 568
Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.1.2+dfsg-1+deb9u1
Depends: libc6 (>= 2.14)
Description: Multiprecision arithmetic library
GNU MP is a programmer's library for arbitrary precision
arithmetic (ie, a bignum package). It can operate on signed
integer, rational, and floating point numeric types.
.
It has a rich set of functions, and the functions have a regular
interface.
Homepage: http://gmplib.org/
Package: libnetaddr-ip-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 320
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libnetaddr-ip-perl (4.079+dfsg-1)
Version: 4.079+dfsg-1+b1
Depends: perl (>= 5.24.1~rc3-2), perlapi-5.24.1, libc6 (>= 2.4)
Recommends: libsocket6-perl
Description: IP address manipulation module
NetAddr::IP provides an object-oriented abstraction on top of IP addresses
or IP subnets, that allows for easy manipulations.
.
The internal representation of all IP objects is in 128 bit IPv6 notation.
IPv4 and IPv6 objects may be freely mixed.
.
The following operations are supported:
Basic IP conversion, netmask manipulation, subnet interpretation, bitwise
mask generation, full mask generation, subnet manipulation, expansion, and
range operations, sub/supernet tests, data type determination, and more
complex operations such as expansion of netblocks into arrays of smaller
blocks of arbitrary size, and CIDR block aggregation
Homepage: https://metacpan.org/release/NetAddr-IP
Package: cabextract
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 74
Maintainer: Eric Sharkey <sharkey@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: cabextract (1.6-1)
Version: 1.6-1+b1
Depends: libc6 (>= 2.14), libmspack0 (>= 0.4)
Enhances: konqueror
Description: Microsoft Cabinet file unpacker
Cabextract is a program which unpacks cabinet (.cab) files, which
are a form of archive Microsoft uses to distribute their software
and things like Windows Font Packs.
Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 62
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.0.9+deb9u1
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
This package provides a number of small utilities which are used
by programs to sensibly select and spawn an appropriate browser,
editor, or pager.
.
The specific utilities included are: sensible-browser sensible-editor
sensible-pager
Package: python3-pyasn1
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 200
Maintainer: Jan Lübbe <jluebbe@debian.org>
Architecture: all
Source: pyasn1
Version: 0.1.9-2
Depends: python3:any (>= 3.3.2-2~)
Suggests: doc-base
Description: ASN.1 library for Python (Python 3 module)
This is an implementation of ASN.1 types and codecs in Python
programming language. It has been first written to support particular
protocol (SNMP) but then generalized to be suitable for a wide range
of protocols based on ASN.1 specification.
.
This package contains the Python 3 module.
Homepage: http://pyasn1.sourceforge.net/
Package: dh-strip-nondeterminism
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 22
Maintainer: Reproducible builds folks <reproducible-builds@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: strip-nondeterminism
Version: 0.034-1
Depends: debhelper, libfile-stripnondeterminism-perl (= 0.034-1), libtimedate-perl, perl:any
Description: file non-deterministic information stripper — Debhelper add-on
StripNondeterminism is a library for stripping non-deterministic information
such as timestamps and filesystem ordering from various file and archive
formats.
.
This can be used as a post-processing step to improve the reproducibility of a
build product, when the build process itself cannot be made deterministic.
.
It is used as part of the Reproducible Builds project, although it should be
considered a temporary workaround which should not be needed in the long
term; upstream software should be reproducible even without using such a tool.
.
This package installs the ‘dh_strip_nondeterminism’ Debhelper command that
strips nondeterminism as part of a Debian package build process.
Homepage: https://reproducible-builds.org/
Package: clamav
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 708
Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 0.100.3+dfsg-0+deb9u1
Depends: clamav-freshclam (>= 0.100.3+dfsg) | clamav-data, libc6 (>= 2.15), libclamav7 (>= 0.100.3), libcurl3 (>= 7.16.2), libjson-c3 (>= 0.10), libssl1.1 (>= 1.1.0), zlib1g (>= 1:1.2.3.3)
Recommends: clamav-base
Suggests: clamav-docs
Description: anti-virus utility for Unix - command-line interface
Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
this software is the integration with mail servers (attachment
scanning). The package provides a flexible and scalable
multi-threaded daemon in the clamav-daemon package, a command-line
scanner in the clamav package, and a tool for automatic updating via
the Internet in the clamav-freshclam package. The programs are based
on libclamav, which can be used by other software.
.
This package contains the command line interface. Features:
- built-in support for various archive formats, including Zip, Tar,
Gzip, Bzip2, OLE2, Cabinet, CHM, BinHex, SIS and others;
- built-in support for almost all mail file formats;
- built-in support for ELF executables and Portable Executable files
compressed with UPX, FSG, Petite, NsPack, wwpack32, MEW, Upack and
obfuscated with SUE, Y0da Cryptor and others;
- built-in support for popular document formats including Microsoft
Office and Mac Office files, HTML, RTF and PDF.
.
For scanning to work, a virus database is needed. There are two options
for getting it:
- clamav-freshclam: updates the database from Internet. This is
recommended with Internet access.
- clamav-data: for users without Internet access. The package is
not updated once installed. The clamav-getfiles package allows
creating custom packages from an Internet-connected computer.
Homepage: https://www.clamav.net/
Package: php-net-socket
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 43
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Version: 1.0.14-2
Depends: php-common
Description: Network Socket Interface
Net_Socket is a class interface to TCP sockets. It provides blocking
and non-blocking operation, with different reading and writing modes
(byte-wise, block-wise, line-wise and special formats like network
byte-order ip addresses).
Homepage: http://pear.php.net/package/Net_Socket
Package: libblas3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 465
Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: lapack
Version: 3.7.0-2
Provides: libblas.so.3
Depends: libc6 (>= 2.4), libgcc1 (>= 1:3.0), libgfortran3 (>= 4.3), libquadmath0 (>= 4.6), libblas-common
Description: Basic Linear Algebra Reference implementations, shared library
BLAS (Basic Linear Algebra Subroutines) is a set of efficient
routines for most of the basic vector and matrix operations.
They are widely used as the basis for other high quality linear
algebra software, for example lapack and linpack. This
implementation is the Fortran 77 reference implementation found
at netlib.
.
This package contains a shared version of the library.
Homepage: http://www.netlib.org/lapack/
Package: grc
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 60
Maintainer: Radovan Garabík <garabik@kassiopeia.juls.savba.sk>
Architecture: all
Version: 1.9-1
Depends: python
Conffiles:
/etc/grc.conf 2606bee8a36ae56aa1163c337b98d8e8
Description: generic colouriser for everything
generic colouriser, can be used to colourise logfiles,
output of commands, arbitrary text....
configured via regexp's.
Package: dpkg-dev
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1876
Origin: debian
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: all
Multi-Arch: foreign
Source: dpkg
Version: 1.18.26
Replaces: manpages-it (<< 2.80-4)
Depends: perl:any, libdpkg-perl (= 1.18.26), tar (>= 1.28-1), bzip2, xz-utils, patch (>= 2.7), make, binutils
Recommends: build-essential, gcc | c-compiler, fakeroot, gnupg | gnupg2, gpgv | gpgv2, libalgorithm-merge-perl
Suggests: debian-keyring
Breaks: devscripts (<< 2.14.10)
Conffiles:
/etc/dpkg/shlibs.default 1a2b9d0a869e2aa885ae3621c557fb95
/etc/dpkg/shlibs.override 84b1e69080569cc5c613a50887af5200
Description: Debian package development tools
This package provides the development tools (including dpkg-source)
required to unpack, build and upload Debian source packages.
.
Most Debian source packages will require additional tools to build;
for example, most packages need make and the C compiler gcc.
Homepage: https://wiki.debian.org/Teams/Dpkg
Package: python-six
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 56
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: all
Multi-Arch: foreign
Source: six
Version: 1.10.0-3
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: Python 2 and 3 compatibility library (Python 2 interface)
Six is a Python 2 and 3 compatibility library. It provides utility
functions for smoothing over the differences between the Python versions
with the goal of writing Python code that is compatible on both Python
versions.
.
This package provides Six on the Python 2 module path. It is complemented
by python3-six and pypy-six.
Homepage: https://pythonhosted.org/six/
Package: libssh2-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 267
Maintainer: Mikhail Gusarov <dottedmag@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libssh2
Version: 1.7.0-1+deb9u2
Depends: libc6 (>= 2.14), libgcrypt20 (>= 1.7.0), zlib1g (>= 1:1.1.4)
Description: SSH2 client-side library
libssh2 is a client-side C library implementing the SSH2 protocol.
It supports regular terminal, SCP and SFTP (v1-v5) sessions;
port forwarding, X11 forwarding; password, key-based and
keyboard-interactive authentication.
.
This package contains the runtime library.
Homepage: http://libssh2.org/
Package: patch
Status: install ok installed
Priority: standard
Section: vcs
Installed-Size: 215
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.7.5-1+deb9u2
Depends: libc6 (>= 2.17)
Suggests: ed, diffutils-doc
Description: Apply a diff file to an original
Patch will take a patch file containing any of the four forms
of difference listing produced by the diff program and apply
those differences to an original file, producing a patched
version.
Homepage: http://savannah.gnu.org/projects/patch/
Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2478
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.4-4.1+deb9u1
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules
Conffiles:
/etc/cron.daily/passwd db990990933b6f56322725223f13c2bc
/etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
/etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
/etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
/etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
/etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
/etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
This package includes passwd, chsh, chfn, and many other programs to
maintain password and group data.
.
Shadow passwords are supported. See /usr/share/doc/passwd/README.Debian
Homepage: https://github.com/shadow-maint/shadow
Package: init-system-helpers
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 131
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.48
Replaces: sysv-rc (<< 2.88dsf-59.3~), sysvinit-utils (<< 2.88dsf-59.3)
Depends: perl-base (>= 5.20.1-3)
Breaks: systemd (<< 44-12), sysvinit-utils (<< 2.88dsf-59.3~)
Conflicts: file-rc (<< 0.8.17~), openrc (<= 0.18.3-1)
Description: helper tools for all init systems
This package contains helper tools that are necessary for switching between
the various init systems that Debian contains (e. g. sysvinit or
systemd). An example is deb-systemd-helper, a script that enables systemd unit
files without depending on a running systemd.
.
It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which
provide an abstraction for enabling, disabling, starting, and stopping
services for all supported Debian init systems as specified by the policy.
.
While this package is maintained by pkg-systemd-maintainers, it is NOT
specific to systemd at all. Maintainers of other init systems are welcome to
include their helpers in this package.
Package: openssh-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 883
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:7.4p1-10+deb9u7
Replaces: ssh, ssh-krb5
Provides: ssh-server
Depends: adduser (>= 3.9), dpkg (>= 1.9.0), libpam-modules (>= 0.72-9), libpam-runtime (>= 0.76-14), lsb-base (>= 4.1+Debian3), openssh-client (= 1:7.4p1-10+deb9u7), openssh-sftp-server, procps, ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libcomerr2 (>= 1.01), libgssapi-krb5-2 (>= 1.14+dfsg), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libssl1.0.2 (>= 1.0.2d), libsystemd0, libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4)
Recommends: libpam-systemd, ncurses-term, xauth
Suggests: molly-guard, monkeysphere, rssh, ssh-askpass, ufw
Conflicts: sftp, ssh-socks, ssh2
Conffiles:
/etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035
/etc/init.d/ssh 338975eb635877703fc066e005f916d9
/etc/init/ssh.conf 6cd55bc913a37a11a5599c4850f865e5
/etc/network/if-up.d/openssh-server 12a34c77b9032e5b23a63782fcc03fef
/etc/pam.d/sshd 8b4c7a12b031424b2a9946881da59812
/etc/ufw/applications.d/openssh-server 486b78d54b93cc9fdc950c1d52ff479e
Description: secure shell (SSH) server, for secure access from remote machines
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
Ssh (Secure Shell) is a program for logging into a remote machine
and for executing commands on a remote machine.
It provides secure encrypted communications between two untrusted
hosts over an insecure network. X11 connections and arbitrary TCP/IP
ports can also be forwarded over the secure channel.
It can be used to provide applications with a secure communication
channel.
.
This package provides the sshd server.
.
In some countries it may be illegal to use any encryption at all
without a special permit.
.
sshd replaces the insecure rshd program, which is obsolete for most
purposes.
Homepage: http://www.openssh.com/
Package: php7.0-tidy
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 79
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-tidy
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc6 (>= 2.14), libtidy5 (>= 5.2.0)
Description: tidy module for PHP
This package provides the tidy module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: liblwp-mediatypes-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 100
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.02-1
Replaces: libwww-perl (<< 6.00)
Depends: perl
Breaks: libwww-perl (<< 6.00)
Description: module to guess media type for a file or a URL
LWP::MediaTypes provides functions for handling media (also known as MIME)
types and encodings. The mapping from file extensions to media types is
defined by the media.types file. If the ~/.media.types file exists it is used
instead. For backwards compatibility it will also look for ~/.mime.types.
Homepage: http://search.cpan.org/dist/LWP-MediaTypes/
Package: manpages-pt
Status: install ok installed
Priority: extra
Section: doc
Installed-Size: 716
Maintainer: Guilherme de S. Pastore <gpastore@debian.org>
Architecture: all
Version: 20040726-4
Suggests: man-db | man-browser
Description: Portuguese Versions of the Manual Pages
These are the manpages available in Portuguese
This package contains the following sections:
* 1 = User programs (e.g. ls, ln)
* 4 = Devices (e.g. hd, sd).
* 5 = File formats and protocols, syntaxes of several system
files (e.g. wtmp, /etc/passwd, nfs).
* 6 = Games etc.
* 7 = Conventions and standards, macro packages, etc.
(e.g. nroff, ascii).
Package: openssh-sftp-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 106
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Source: openssh
Version: 1:7.4p1-10+deb9u7
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: openssh-client (= 1:7.4p1-10+deb9u7), libc6 (>= 2.17)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Enhances: openssh-server, ssh-server
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
Ssh (Secure Shell) is a program for logging into a remote machine
and for executing commands on a remote machine.
It provides secure encrypted communications between two untrusted
hosts over an insecure network. X11 connections and arbitrary TCP/IP
ports can also be forwarded over the secure channel.
It can be used to provide applications with a secure communication
channel.
.
This package provides the SFTP server module for the SSH server. It
is needed if you want to access your SSH server with SFTP. The SFTP
server module also works with other SSH daemons like dropbear.
.
OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer
protocol described in:
.
http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt
.
Newer versions of the draft will not be supported, though some features
are individually implemented as extensions.
Homepage: http://www.openssh.com/
Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 340
Maintainer: Craig Small <csmall@debian.org>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conffiles:
/etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains terminfo data files to support the most common types of
terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
vt52, and xterm.
Homepage: http://invisible-island.net/ncurses/
Package: postfix-doc
Status: install ok installed
Priority: extra
Section: doc
Installed-Size: 4053
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: all
Source: postfix
Version: 3.1.15-0+deb9u1
Suggests: postfix
Conffiles:
/etc/postfix/postfix-files.d/doc.files 00f740822448c9828e48201c07cb0cb1
Description: Documentation for Postfix
Postfix is Wietse Venema's mail transport agent that started life as an
alternative to the widely-used Sendmail program. Postfix attempts to
be fast, easy to administer, and secure, while at the same time being
sendmail compatible enough to not upset existing users. Thus, the outside
has a sendmail-ish flavor, but the inside is completely different.
.
This package provides the documentation for Postfix.
Homepage: http://www.postfix.org
Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 3366
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.24-11+deb9u4
Depends: libc6 (>> 2.24), libc6 (<< 2.25)
Recommends: manpages
Conffiles:
/etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
/etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
/etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
/etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
/etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
This package contains utility programs related to the GNU C Library.
.
* catchsegv: catch segmentation faults in programs
* getconf: query system configuration variables
* getent: get entries from administrative databases
* iconv, iconvconfig: convert between character encodings
* ldd, ldconfig: print/configure shared library dependencies
* locale, localedef: show/generate locale definitions
* tzselect, zdump, zic: select/dump/compile time zones
Homepage: http://www.gnu.org/software/libc/libc.html
Package: libaio1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libaio
Version: 0.3.110-3
Depends: libc6 (>= 2.4)
Description: Linux kernel AIO access library - shared library
This library enables userspace to use Linux kernel asynchronous I/O
system calls, important for the performance of databases and other
advanced applications.
.
This package contains the shared library.
Homepage: https://fedorahosted.org/releases/l/i/libaio/
Package: libsemanage1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 291
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsemanage
Version: 2.6-2
Depends: libsemanage-common (= 2.6-2), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.14), libselinux1 (>= 2.6), libsepol1 (>= 2.6), libustr-1.0-1 (>= 1.0.4)
Breaks: policycoreutils (<< 2.4), selinux-policy-default (<< 2:2.20140421-10~), selinux-policy-mls (<< 2:2.20140421-10~)
Description: SELinux policy management library
This package provides the shared libraries for SELinux policy management.
It uses libsepol for binary policy manipulation and libselinux for
interacting with the SELinux system. It also exec's helper programs
for loading policy and for checking whether the file_contexts
configuration is valid (load_policy and setfiles from
policycoreutils) presently, although this may change at least for the
bootstrapping case
.
Security-enhanced Linux is a patch of the Linux kernel and a
number of utilities with enhanced security functionality designed to
add mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement, Role-based Access
Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/
Package: mcrypt
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 205
Maintainer: RISKO Gergely <risko@debian.org>
Architecture: amd64
Source: mcrypt (2.6.8-1.3)
Version: 2.6.8-1.3+b1
Depends: libc6 (>= 2.14), libmcrypt4 (>= 2.5.8-1), libmhash2 (>= 0.8.16-1), zlib1g (>= 1:1.1.4), bzip2
Description: Replacement for old unix crypt(1)
mcrypt is a crypting program, intended to be replacement for the old
unix crypt(1). But it can do a lot more, since with its libmcrypt
library it can encrypt and decrypt with the following alogirhtms:
BLOWFISH, TWOFISH, DES, TripleDES, 3-WAY, SAFER-sk64, SAFER-sk128,
SAFER+, OKI97, GOST, RC2, RC6, MARS, IDEA, RIJNDAEL-128,
RIJNDAEL-192, SERPENT, RIJNDAEL-256, CAST-128 (known as CAST5),
CAST-256, ARCFOUR, ENIGMA, PANAMA, XTEA and WAKE.
.
Please note that this package is buggy and unmaintained by
the upstream authors. If you can, please look for other
implementations (openssl, gnutls, gnupg).
Homepage: http://mcrypt.sourceforge.net/
Package: mlock
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 56
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: amd64
Source: uw-imap
Version: 8:2007f~dfsg-5+deb9u1
Depends: libc6 (>= 2.3)
Description: mailbox locking program
IMAP (Internet Message Access Protocol) is a method of accessing
electronic messages kept on a (possibly shared) mail server.
.
The UW (University of Washington) IMAP toolkit provides the c-client
mail-handling library supporting various network transport methods,
file system storage formats, and authentication and authorization
methods.
.
This package contains a program to lock mailbox files to avoid
corruption.
Homepage: http://www.washington.edu/imap/
Package: libsocket6-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 72
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libsocket6-perl (0.27-1)
Version: 0.27-1+b1
Depends: perl (>= 5.24.1~rc3-2), perlapi-5.24.1, libc6 (>= 2.14)
Description: Perl extensions for IPv6
The Socket6 module supports getaddrinfo() and getnameinfo() to intend
to enable protocol independent programming. If your environment
supports IPv6, IPv6 related defines such as AF_INET6 are included.
Homepage: https://metacpan.org/release/Socket6
Package: php-cli-prompt
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 21
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Version: 1.0.2+dfsg-1
Depends: php-common
Description: tiny helper prompting for user input
Allows you to prompt for user input on the command line, and optionally hide
the characters they type.
Homepage: https://github.com/Seldaek/cli-prompt
Package: python-zope.interface
Status: install ok installed
Priority: optional
Section: zope
Installed-Size: 663
Maintainer: Debian/Ubuntu Zope Team <pkg-zope-developers@lists.alioth.debian.org>
Architecture: amd64
Source: zope.interface
Version: 4.3.2-1
Replaces: python-zope, python-zopeinterface
Provides: python-zope, python-zopeinterface, python2.7-zope.interface
Depends: python (<< 2.8), python (>= 2.7~), python-pkg-resources, python:any (<< 2.8), python:any (>= 2.7.5-5~), libc6 (>= 2.4)
Conflicts: python-zope, python-zopeinterface, zope3
Description: Interfaces for Python
This package provides an implementation of object interfaces for Python.
Interfaces are a mechanism for labeling objects as conforming to a given API
or contract. So, this package can be considered as implementation of the
Design By Contract methodology support in Python.
.
This is the Python 2 version.
Homepage: http://pypi.python.org/pypi/zope.interface
Package: galera-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2899
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Version: 25.3.19-2
Replaces: galera
Provides: galera, galera3, percona-xtradb-cluster-galera-25, wsrep
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libssl1.1 (>= 1.1.0), libstdc++6 (>= 5.2)
Breaks: galera
Conflicts: garbd-2, garbd2, percona-galera-3, percona-xtradb-cluster-galera, percona-xtradb-cluster-galera-2.x, percona-xtradb-cluster-galera-3.x, percona-xtradb-cluster-garbd-2.x, percona-xtradb-cluster-garbd-3.x
Description: Replication framework for transactional applications
Galera is a fast synchronous multimaster wsrep provider (replication engine)
for transactional databases and similar applications. For more information
about wsrep API see http://launchpad.net/wsrep. For a description of Galera
replication engine see http://galeracluster.com.
.
This package contains the Galera library/plugin.
Homepage: http://www.galeracluster.com/
Package: python3-oauthlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 437
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: python-oauthlib
Version: 2.0.1-1
Depends: python3:any (>= 3.3.2-2~), python3-blinker, python3-cryptography, python3-jwt (>= 1.0.0)
Description: generic, spec-compliant implementation of OAuth for Python3
OAuthLib is a generic utility which implements the logic of OAuth without
assuming a specific HTTP request object. It can be used to graft OAuth support
onto HTTP libraries.
.
OAuth1 is almost complete while OAuth2 is already in the works.
.
This package contains the Python 3 version of the library.
Homepage: https://github.com/idan/oauthlib
Package: libseccomp2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 297
Maintainer: Kees Cook <kees@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libseccomp
Version: 2.3.1-2.1+deb9u1
Depends: libc6 (>= 2.14)
Description: high level interface to Linux seccomp filter
This library provides a high level interface to constructing, analyzing
and installing seccomp filters via a BPF passed to the Linux Kernel's
prctl() syscall.
Homepage: https://github.com/seccomp/libseccomp
Package: php7.0-sqlite3
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 108
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-pdo-sqlite, php-sqlite3, php7.0-pdo-sqlite
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc6 (>= 2.14), libsqlite3-0 (>= 3.7.15)
Description: SQLite3 module for PHP
This package provides the SQLite3 module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libxtables12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 135
Maintainer: Arturo Borrero Gonzalez <arturo@debian.org>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.6.0+snapshot20161117-6
Replaces: iptables (<< 1.4.16.3-3), libxtables11 (>= 1.6.0+snapshot20161117-1)
Depends: libc6 (>= 2.14)
Breaks: iptables (<< 1.4.16.3-3), libxtables11 (>= 1.6.0+snapshot20161117-1)
Description: netfilter xtables library
The user-space interface to the Netfilter xtables kernel framework.
Homepage: http://www.netfilter.org/
Package: autotools-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 152
Maintainer: Henrique de Moraes Holschuh <hmh@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 20161112.1
Enhances: cdbs, debhelper
Description: Update infrastructure for config.{guess,sub} files
This package installs an up-to-date version of config.guess and
config.sub, used by the automake and libtool packages. It provides
the canonical copy of those files for other packages as well.
.
It also documents in /usr/share/doc/autotools-dev/README.Debian.gz
best practices and guidelines for using autoconf, automake and
friends on Debian packages. This is a must-read for any developers
packaging software that uses the GNU autotools, or GNU gettext.
.
Additionally this package provides seamless integration into Debhelper
or CDBS, allowing maintainers to easily update config.{guess,sub} files
in their packages.
Homepage: http://savannah.gnu.org/projects/config/
Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 7066
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 232-25+deb9u14
Replaces: bash-completion (<< 1:2.1), systemd (<< 232-20)
Depends: libacl1 (>= 2.2.51-8), libblkid1 (>= 2.19.1), libc6 (>= 2.17), libkmod2 (>= 5~), libselinux1 (>= 2.1.9), adduser, libudev1 (= 232-25+deb9u14), lsb-base (>= 3.0-6), util-linux (>= 2.27.1), procps
Pre-Depends: dpkg (>= 1.17.14)
Breaks: bash-completion (<< 1:2.1), consolekit (<< 0.4.6-1), ifplugd (<< 0.28-19.1~), ifupdown (<< 0.8.5~), joystick (<< 1:1.4.9-1~), kmod (<< 14), plymouth (<< 0.9.0-7), systemd (<< 232-20), usb-modeswitch (<< 2.3.0+repack0-1~)
Conflicts: hal
Conffiles:
/etc/init.d/udev e4da2ae5c153148fad0b3f6e5e7ce61e
/etc/init/udev.conf 41c0081f3a830e0902aaff76a53edf98
/etc/init/udevmonitor.conf ec187fc822d47c41416e7c531c8c48dd
/etc/init/udevtrigger.conf 651ff2421dde80be7ce7ccbf7fa8cf18
/etc/udev/udev.conf a9c43ddab6e58eefa56db50ff44b2b46
Description: /dev/ and hotplug management daemon
udev is a daemon which dynamically creates and removes device nodes from
/dev/, handles hotplug events and loads drivers at boot time.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Package: libunistring0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1144
Maintainer: Andreas Rottmann <rotty@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libunistring
Version: 0.9.6+really0.9.3-0.1
Depends: libc6 (>= 2.14)
Description: Unicode string library for C
The 'libunistring' library implements Unicode strings (in the UTF-8,
UTF-16, and UTF-32 encodings), together with functions for Unicode
characters (character names, classifications, properties) and
functions for string processing (formatted output, width, word
breaks, line breaks, normalization, case folding, regular
expressions).
.
This package contains the shared library.
Homepage: http://www.gnu.org/software/libunistring/
Package: clamav-daemon
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 878
Maintainer: ClamAV Team <pkg-clamav-devel@lists.alioth.debian.org>
Architecture: amd64
Source: clamav
Version: 0.100.3+dfsg-0+deb9u1
Replaces: clamav-base (<< 0.98.1+dfsg-6)
Depends: adduser, clamav-base (= 0.100.3+dfsg-0+deb9u1), clamav-freshclam (>= 0.100.3+dfsg) | clamav-data, dpkg (>= 1.16.1), lsb-base (>= 3.2-13), procps (>= 1:3.3.2), ucf, debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), libc6 (>= 2.23), libclamav7 (>= 0.100.3), libncurses5 (>= 6), libssl1.1 (>= 1.1.0), libsystemd0, libtinfo5 (>= 6), zlib1g (>= 1:1.2.0.2)
Recommends: clamdscan
Suggests: apparmor, clamav-docs, daemon
Breaks: clamav-base (<< 0.98.1+dfsg-6)
Conffiles:
/etc/apparmor.d/usr.sbin.clamd 67acab31cdd22e58b0d804a4d89eb90c
/etc/init.d/clamav-daemon 6405cb5f7bf3c3413d6b16f38916bbf3
/etc/logcheck/ignore.d.paranoid/clamav-daemon a2d0bd9c56a1b58dc939b4eb84d92206
/etc/logcheck/ignore.d.server/clamav-daemon 5124f89490b134ebe8bb898f41c25e79
Description: anti-virus utility for Unix - scanner daemon
Clam AntiVirus is an anti-virus toolkit for Unix. The main purpose of
this software is the integration with mail servers (attachment
scanning). The package provides a flexible and scalable
multi-threaded daemon in the clamav-daemon package, a command-line
scanner in the clamav package, and a tool for automatic updating via
the Internet in the clamav-freshclam package. The programs are based
on libclamav, which can be used by other software.
.
This package contains the daemon featuring:
- fast, multi-threaded daemon;
- easy integration with MTA's;
- support for on-access scanning;
- remote scanning;
- able to be run supervised by daemon.
Homepage: https://www.clamav.net/
Package: libapparmor1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 140
Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apparmor
Version: 2.11.0-3+deb9u2
Depends: libc6 (>= 2.17)
Description: changehat AppArmor library
This package provides the shared library used for making use of the
AppArmor profile and changehat functionality, as well as common log
parsing routines.
Homepage: http://apparmor.net/
Package: iptables
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1528
Maintainer: Arturo Borrero Gonzalez <arturo@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.6.0+snapshot20161117-6
Depends: libip4tc0 (= 1.6.0+snapshot20161117-6), libip6tc0 (= 1.6.0+snapshot20161117-6), libiptc0 (= 1.6.0+snapshot20161117-6), libxtables12 (= 1.6.0+snapshot20161117-6), libc6 (>= 2.14), libnetfilter-conntrack3, libnfnetlink0
Suggests: kmod
Description: administration tools for packet filtering and NAT
iptables is the userspace command line program used to configure
the Linux packet filtering ruleset. It is targeted towards system
administrators. Since Network Address Translation is also configured
from the packet filter ruleset, iptables is used for this, too. The
iptables package also includes ip6tables. ip6tables is used for
configuring the IPv6 packet filter
Homepage: http://www.netfilter.org/
Package: libldap-2.4-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 510
Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openldap
Version: 2.4.44+dfsg-5+deb9u9
Replaces: libldap-2.3-0, libldap2
Depends: libc6 (>= 2.14), libgnutls30 (>= 3.5.6), libsasl2-2, libldap-common (>= 2.4.44+dfsg-5+deb9u9)
Conflicts: ldap-utils (<= 2.1.23-1)
Description: OpenLDAP libraries
These are the run-time libraries for the OpenLDAP (Lightweight Directory
Access Protocol) servers and clients.
Homepage: http://www.openldap.org/
Package: webalizer
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 1282
Maintainer: Julien Viard de Galbert <julien@vdg.blogsite.org>
Architecture: amd64
Source: webalizer (2.23.08-1)
Version: 2.23.08-1+b3
Depends: libc6 (>= 2.14), libdb5.3, libgd3 (>= 2.1.0~alpha~), libgeoip1, libpng16-16 (>= 1.6.2-1), zlib1g (>= 1:1.1.4)
Pre-Depends: debconf (>= 1.4.58) | debconf-2.0
Suggests: httpd
Conffiles:
/etc/cron.daily/webalizer d67be3c82f76e623b1266c8caa14ca47
/etc/webalizer/webalizer.conf.sample 6ac0aba3f83571b5937f6f33e8bffccc
Description: web server log analysis program
The Webalizer was designed to scan web server log files in various formats
and produce usage statistics in HTML format for viewing through a browser.
The Webalizer produces yearly, monthly, daily and hourly statistics. In
the monthly reports, various statistics may be produced to show overall
usage, usage by day and hour, usage by visiting sites, URLs, user agents
(browsers), referrers and country. The Webalizer is highly configurable by
use of either command line options or a configuration file, allowing the
program to be tailored to individual needs easily.
Homepage: http://www.mrunix.net/webalizer/
Package: python3-chardet
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 496
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: all
Source: chardet
Version: 2.3.0-2
Depends: python3:any (>= 3.3.2-2~), python3-pkg-resources
Description: universal character encoding detector for Python3
Chardet takes a sequence of bytes in an unknown character encoding, and
attempts to determine the encoding.
.
Supported encodings:
* ASCII, UTF-8, UTF-16 (2 variants), UTF-32 (4 variants)
* Big5, GB2312, EUC-TW, HZ-GB-2312, ISO-2022-CN (Traditional and Simplified
Chinese)
* EUC-JP, SHIFT_JIS, ISO-2022-JP (Japanese)
* EUC-KR, ISO-2022-KR (Korean)
* KOI8-R, MacCyrillic, IBM855, IBM866, ISO-8859-5, windows-1251 (Cyrillic)
* ISO-8859-2, windows-1250 (Hungarian)
* ISO-8859-5, windows-1251 (Bulgarian)
* windows-1252 (English)
* ISO-8859-7, windows-1253 (Greek)
* ISO-8859-8, windows-1255 (Visual and Logical Hebrew)
* TIS-620 (Thai)
.
This library is a port of the auto-detection code in Mozilla.
.
This package contains the Python 3 version of the library.
Homepage: https://github.com/chardet/chardet
Package: php-memcache
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 149
Maintainer: Debian PHP PECL Maintainers <pkg-php-pecl@lists.alioth.debian.org>
Architecture: amd64
Version: 3.0.9~20160311.4991c2f-5
Provides: php7.0-memcache
Depends: php-common (>= 1:7.0+33~), phpapi-20151012, libc6 (>= 2.15), zlib1g (>= 1:1.1.4)
Suggests: memcached
Conffiles:
/etc/php/7.0/mods-available/memcache.ini 0a3bdf75c380dace04b20f43c80d7328
Description: memcache extension module for PHP
Memcached is a caching daemon designed especially for dynamic web applications
to decrease database load by storing objects in memory.
.
This extension allows you to work with memcached through handy OO and
procedural interfaces in your php5 applications.
.
This is an updated version for PHP 7 with non-blocking I/O taken from
https://github.com/websupport-sk/pecl-memcache
Homepage: https://github.com/websupport-sk/pecl-memcache
Package: liburi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 228
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.71-1
Depends: perl
Suggests: libwww-perl
Description: module to manipulate and access URI strings
URI is a collection of Perl modules that represent and manipulate Uniform
Resource Identifier (URI) references as specified in RFC 2396.
.
URI objects can be used to access and manipulate the various components
that make up these strings. There are also methods to combine URIs in
various ways.
.
The URI class replaces the URI::URL class that used to be distributed with
libwww-perl. This package also includes an emulation of the old URI::URL
interface, which implements both the old and the new interface.
Homepage: https://metacpan.org/release/URI
Package: grub-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 14768
Maintainer: GRUB Maintainers <pkg-grub-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.02~beta3-5+deb9u2
Replaces: grub-coreboot (<< 2.00-4), grub-efi (<< 1.99-1), grub-efi-amd64 (<< 2.00-4), grub-efi-ia32 (<< 2.00-4), grub-efi-ia64 (<< 2.00-4), grub-ieee1275 (<< 2.00-4), grub-linuxbios (<< 1.96+20080831-1), grub-pc (<< 2.00-4), grub-yeeloong (<< 2.00-4)
Depends: libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.36), libfreetype6 (>= 2.2.1), libfuse2 (>= 2.8.4-1.4), liblzma5 (>= 5.1.1alpha+20120614), gettext-base
Recommends: os-prober (>= 1.33)
Suggests: multiboot-doc, grub-emu, xorriso (>= 0.5.6.pl00), desktop-base (>= 4.0.6), console-setup
Breaks: apport (<< 2.1.1), friendly-recovery (<< 0.2.13), lupin-support (<< 0.55), mdadm (<< 2.6.7-2)
Conffiles:
/etc/bash_completion.d/grub b269c1383a87a7da2cc309c929ba35ca
/etc/grub.d/00_header af0456fe0335aa217143f7e411624df9
/etc/grub.d/05_debian_theme 1b68d93d4dd2dacf7b62a7d0937baa74
/etc/grub.d/10_linux 4991370358107290b9b1596e91f1b919
/etc/grub.d/20_linux_xen ad715f85e82c47ab3bb93651eb9a750c
/etc/grub.d/30_os-prober 6944c663c6ea8c51ebf00b77ea2459d7
/etc/grub.d/30_uefi-firmware f86dfa1725733e0f96436c0c7358004a
/etc/grub.d/40_custom babe7de352fe18de5a238569cf4b8a11
/etc/grub.d/41_custom 7bb4eb43ee7cb6d6f52df3dd2bde84e9
/etc/grub.d/README be58f42dfe74feb6eeb98c6a843c743f
Description: GRand Unified Bootloader (common files)
This package contains common files shared by the distinct flavours of GRUB.
It is shared between GRUB Legacy and GRUB 2, although a number of files
specific to GRUB 2 are here as long as they do not break GRUB Legacy.
Homepage: http://www.gnu.org/software/grub/
Package: kbd
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1632
Maintainer: Console utilities maintainers <pkg-kbd-devel@lists.alioth.debian.org>
Architecture: amd64
Source: kbd (2.0.3-2)
Version: 2.0.3-2+b1
Provides: console-utilities
Depends: libc6 (>= 2.14), lsb-base (>= 3.0-10)
Recommends: console-setup | console-data
Conflicts: console-utilities
Description: Linux console font and keytable utilities
This package allows you to set up the Linux console, change the font,
resize text mode virtual consoles and remap the keyboard.
.
You will probably want to install a set of data files, such as the one
in the “console-data” package.
Homepage: http://www.kbd-project.org/
Package: openbsd-inetd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 83
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: foreign
Version: 0.20160825-2
Provides: inet-superserver
Depends: libbsd0 (>= 0.6.0), libc6 (>= 2.17), libevent-2.0-5 (>= 2.0.10-stable), libsystemd0, libwrap0 (>= 7.6-4~), init-system-helpers (>= 1.18~), lsb-base, update-inetd, tcpd
Conffiles:
/etc/init.d/openbsd-inetd 19e49bf9d1c65cbcd1708d01ea5e07f2
Description: OpenBSD Internet Superserver
The inetd server is a network daemon program that specializes in managing
incoming network connections. Its configuration file tells it what
program needs to be run when an incoming connection is received. Any
service port may be configured for either of the tcp or udp protocols.
.
This is a port of the OpenBSD daemon with some debian-specific features.
This package supports IPv6, built-in libwrap access control, binding to
specific addresses, UNIX domain sockets and socket buffers tuning.
Package: libtirpc1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 219
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtirpc
Version: 0.2.5-1.2+deb9u1
Depends: libc6 (>= 2.16), libcomerr2 (>= 1.01), libgssapi-krb5-2 (>= 1.14+dfsg), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2)
Breaks: nfs-common (<< 1:1.2.8-7), nfs-kernel-server (<< 1:1.2.8-7)
Conffiles:
/etc/netconfig ca8db53e3af4d735335c2607d21c7195
Description: transport-independent RPC library
This package contains a port of Sun's transport-independent RPC library to
Linux. The library is intended as a replacement for the RPC code in the GNU C
library, providing among others support for RPC (and in turn, NFS) over IPv6.
Homepage: http://sourceforge.net/projects/libtirpc
Package: libexttextcat-data
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 504
Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libexttextcat
Version: 3.4.4-2
Description: Language detection library - data files
Libextttextcat is a library with functions that implement the classification
technique described in Cavnar & Trenkle, "N-Gram-Based Text Categorization".
It was primarily developed for language guessing, a task on which it is known
to perform with near-perfect accuracy.
.
This package provides the libtextcat data files.
Homepage: https://wiki.documentfoundation.org/Libexttextcat
Package: libssl1.1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3566
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 1.1.0l-1~deb9u6
Depends: libc6 (>= 2.17), debconf (>= 0.5) | debconf-2.0
Breaks: salt-common (<= 2016.3.3+ds-3)
Description: Secure Sockets Layer toolkit - shared libraries
This package is part of the OpenSSL project's implementation of the SSL
and TLS cryptographic protocols for secure communication over the
Internet.
.
It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org/
Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 110
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59.9
Replaces: initscripts (<< 2.88dsf-59.5)
Depends: libc6 (>= 2.14), init-system-helpers (>= 1.25~), util-linux (>> 2.28-2~)
Breaks: systemd (<< 215)
Description: System-V-like utilities
This package contains the important System-V-like utilities.
.
Specifically, this package includes:
killall5, pidof
Homepage: http://savannah.nongnu.org/projects/sysvinit
Package: xz-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 515
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.2.2-1.2+deb9u1
Replaces: lzip (<< 1.8~rc2), xz-lzma
Provides: lzma
Depends: libc6 (>= 2.17), liblzma5 (>= 5.2.2)
Breaks: lzip (<< 1.8~rc2)
Conflicts: lzma (<< 9.22-1), xz-lzma
Description: XZ-format compression utilities
XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
compression format, which provides memory-hungry but powerful
compression (often better than bzip2) and fast, easy decompression.
.
This package provides the command line tools for working with XZ
compression, including xz, unxz, xzcat, xzgrep, and so on. They can
also handle the older LZMA format, and if invoked via appropriate
symlinks will emulate the behavior of the commands in the lzma
package.
.
The XZ format is similar to the older LZMA format but includes some
improvements for general use:
.
* 'file' magic for detecting XZ files;
* crc64 data integrity check;
* limited random-access reading support;
* improved support for multithreading (not used in xz-utils);
* support for flushing the encoder.
Homepage: http://tukaani.org/xz/
Package: debian-archive-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 189
Maintainer: Debian Release Team <packages@release.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2017.5+deb9u2
Depends: gpgv
Recommends: gnupg
Breaks: apt (<< 0.7.25.1)
Conffiles:
/etc/apt/trusted.gpg.d/debian-archive-bullseye-automatic.gpg 2b99b0ac1f328b22f4acc058b0c92881
/etc/apt/trusted.gpg.d/debian-archive-bullseye-security-automatic.gpg 6072d5ef932b9bd34ea96c9271d9f1f3
/etc/apt/trusted.gpg.d/debian-archive-bullseye-stable.gpg 755bab5a834756a173b6f3fad41b3569
/etc/apt/trusted.gpg.d/debian-archive-buster-automatic.gpg b53e6ca4ed295fc38621315853f623d0
/etc/apt/trusted.gpg.d/debian-archive-buster-security-automatic.gpg 34933237e27e02ca0f55aab2550c23f1
/etc/apt/trusted.gpg.d/debian-archive-buster-stable.gpg 0baf1e6d0f61a85b7b7fd0fa6c25bd22
/etc/apt/trusted.gpg.d/debian-archive-jessie-automatic.gpg 548a861c55fdf06fb9b0419c30cd33ec
/etc/apt/trusted.gpg.d/debian-archive-jessie-security-automatic.gpg 28ffc0824518a9d42fb40e5caad7c5ef
/etc/apt/trusted.gpg.d/debian-archive-jessie-stable.gpg 3cf5c69a2532cc3a3cba6c5bcf02cb7b
/etc/apt/trusted.gpg.d/debian-archive-stretch-automatic.gpg c82e16869fb2d6234aff8b63fa00fb65
/etc/apt/trusted.gpg.d/debian-archive-stretch-security-automatic.gpg 9fcd290147d1ed6b6768c1d1163f1383
/etc/apt/trusted.gpg.d/debian-archive-stretch-stable.gpg 829333ce438185f23bd9c122a19ef25d
Description: GnuPG archive keys of the Debian archive
The Debian project digitally signs its Release files. This package
contains the archive keys used for that.
Package: python-pbr
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 278
Maintainer: PKG OpenStack <openstack-devel@lists.alioth.debian.org>
Architecture: all
Version: 1.10.0-1
Depends: python-pkg-resources, python-six (>= 1.9.0), python2.7:any, python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: inject useful and sensible default behaviors into setuptools - Python 2.x
PBR (Python Build Reasonableness) is a library that injects some useful and
sensible default behaviors into your setuptools run. PBR can:
* Manage version number based on git revisions and tags (Version file).
* Generate AUTHORS file from git log
* Generate ChangeLog from git log
* Generate Sphinx autodoc stub files for your whole module
* Store your dependencies in a pip requirements file
* Use your README file as a long_description
* Smartly find packages under your root package
.
PBR is only mildly configurable. The basic idea is that there's a decent way
to run things and if you do, you should reap the rewards, because then it's
simple and repeatable. If you want to do things differently, cool! But you've
already got the power of Python at your fingertips, so you don't really need
PBR.
.
PBR builds on top of the work that d2to1 started to provide for declarative
configuration. d2to1 is itself an implementation of the ideas behind
distutils2. Although distutils2 is now abandoned in favor of work towards PEP
426 and Metadata 2.0, declarative config is still a great idea and
specifically important in trying to distribute setup code as a library when
that library itself will alter how the setup is processed. As Metadata 2.0 and
other modern Python packaging PEPs come out, PBR aims to support them as
quickly as possible.
.
This package provides support for Python 2.x.
Homepage: https://pypi.python.org/pypi/pbr
Package: task-english
Status: install ok installed
Priority: optional
Section: tasks
Installed-Size: 6
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: all
Source: tasksel
Version: 3.39
Depends: tasksel (= 3.39), locales
Recommends: util-linux-locales, ibritish, iamerican
Description: General English environment
This task installs packages and documentation in British
and American English to help English speaking people use Debian.
Package: libtext-iconv-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 50
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Source: libtext-iconv-perl (1.7-5)
Version: 1.7-5+b4
Depends: libc6 (>= 2.2.5), perl-base (>= 5.24.1~rc3-2), perlapi-5.24.1
Description: converts between character sets in Perl
The iconv() family of functions from XPG4 defines an API for converting
between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They
are provided by libc6.
.
This package allows access to them from Perl via the Text::Iconv
package.
Homepage: http://search.cpan.org/search?module=Text::Iconv
Package: libaprutil1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 247
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.5.4-3
Depends: libapr1 (>= 1.4.8-2~), libc6 (>= 2.14), libdb5.3, libexpat1 (>= 2.0.1), libgdbm3 (>= 1.8.3), libssl1.1 (>= 1.1.0), libuuid1 (>= 2.16)
Breaks: libapr1 (<< 1.4.8-2~)
Description: Apache Portable Runtime Utility Library
APR is Apache's Portable Runtime Library, designed to be a support library
that provides a predictable and consistent interface to underlying
platform-specific implementations.
.
APR Util is a utilities library implemented on top of apr, providing database
access, xml parsing, and other useful functionality.
Homepage: http://apr.apache.org/
Package: libnet-cidr-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 41
Maintainer: Bart Martens <bartm@debian.org>
Architecture: all
Version: 0.18-1
Depends: perl
Description: Manipulate IPv4/IPv6 netblocks in CIDR notation
The Net::CIDR package contains functions that manipulate lists of
IP netblocks expressed in CIDR notation. The Net::CIDR functions
handle both IPv4 and IPv6 addresses.
Homepage: http://search.cpan.org/dist/Net-CIDR/
Package: php7.0-imap
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 123
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-imap
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc-client2007e, libc6 (>= 2.14), libcomerr2 (>= 1.01), libgssapi-krb5-2 (>= 1.6.dfsg.2), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libpam0g (>= 0.99.7.1), libssl1.1 (>= 1.1.0)
Description: IMAP module for PHP
This package provides the IMAP module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: php7.0-json
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 67
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-json
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc6 (>= 2.14)
Description: JSON module for PHP
This package provides the JSON module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: librecode0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1833
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: same
Source: recode
Version: 3.6-23
Depends: libc6 (>= 2.14)
Description: Shared library on which recode is based
This recoding library converts files between various coded character
sets and surface encodings. The library recognizes or produces more
than 300 different character sets and is able to convert files between
almost any pair. Most RFC 1345 character sets, and all `libiconv'
character sets, are supported.
Package: python3-jinja2
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 810
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: all
Source: jinja2
Version: 2.8-1
Depends: python3-markupsafe, python3:any (>= 3.3.2-2~)
Recommends: python3-pkg-resources
Suggests: python-jinja2-doc
Description: small but fast and easy to use stand-alone template engine
Jinja2 is a template engine written in pure Python. It provides a Django
inspired non-XML syntax but supports inline expressions and an optional
sandboxed environment.
.
The key-features are:
* Configurable syntax. If you are generating LaTeX or other formats with
Jinja2 you can change the delimiters to something that integrates better
into the LaTeX markup.
* Fast. While performance is not the primarily target of Jinja2 it’s
surprisingly fast. The overhead compared to regular Python code was reduced
to the very minimum.
* Easy to debug. Jinja2 integrates directly into the Python traceback system
which allows you to debug Jinja2 templates with regular Python debugging
helpers.
* Secure. It’s possible to evaluate untrusted template code if the optional
sandbox is enabled. This allows Jinja2 to be used as templating language
for applications where users may modify the template design.
Homepage: http://jinja.pocoo.org/
Package: libc-l10n
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 4211
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: glibc
Version: 2.24-11+deb9u4
Replaces: locales (<< 2.21-1)
Breaks: locales (<< 2.21-1)
Description: GNU C Library: localization files
This package contains the translation files for the GNU C library and
utility programs.
Homepage: http://www.gnu.org/software/libc/libc.html
Package: libtext-wrapi18n-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 26
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Version: 0.06-7.1
Depends: libtext-charwidth-perl
Description: internationalized substitute of Text::Wrap
This module is a substitution for Text::Wrap, supporting
multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth
characters such as east Asian characters, combining characters
such as diacritical marks and Thai, and languages which don't
use whitespaces between words such as Chinese and Japanese.
.
It provides wrap().
Homepage: http://search.cpan.org/search?module=Text::WrapI18N
Package: libsemanage-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 39
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 2.6-2
Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Conffiles:
/etc/selinux/semanage.conf f6f9b97af233c90ca127f406fb6f0932
Description: Common files for SELinux policy management libraries
This package provides the common files used by the shared libraries
for SELinux policy management.
.
Security-enhanced Linux is a patch of the Linux kernel and a
number of utilities with enhanced security functionality designed to
add mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement, Role-based Access
Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/
Package: php-common
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 70
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: all
Source: php-defaults (49)
Version: 1:49
Depends: psmisc (>= 22.15-1~), sed (>= 4.1.1-1), init-system-helpers (>= 1.18~)
Breaks: php-amqp (<< 1.7.0~alpha2-4~), php-apcu (<< 5.1.3+4.0.10-2~), php-apcu-bc (<< 1.0.3-2~), php-ast (<< 0.1.1-2~), php-geoip (<< 1.1.0-4~), php-gmagick (<< 2.0.1~rc3+1.1.7~rc3-2~), php-igbinary (<< 1.2.1-10-ge0e66b9+1.2.1-2~), php-imagick (<< 3.4.0~rc6-2~), php-memcache (<< 3.0.9~20151130.fdbd46b-2~), php-memcached (<< 2.2.0-95-g6ace07d+2.2.0-2~), php-mongodb (<< 1.1.2-3~), php-msgpack (<< 2.0.0+0.5.7-2~), php-radius (<< 1.4.0~b1-2~), php-redis (<< 2.2.7-355-g799e0bc+2.2.7-4~), php-rrd (<< 2.0.0+1.1.3-4~), php-smbclient (<< 0.8.0~rc1-2~), php-ssh2 (<< 0.12-39-g3dfe336+0.12-2~), php-uploadprogress (<< 1.0.3.1-4-g95d8a0f-2~), php-uuid (<< 1.0.4-2~), php-xdebug (<< 2.4.0~rc4-2~), php-zmq (<< 1.1.3-3~), php5.6-common (<< 5.6.18+dfsg-10~), php5.6-json (<< 1.3.9-2~), php7.0-common (<< 7.0.3-11~)
Conffiles:
/etc/cron.d/php e6fa2d74078ac0ac6fd730decf3b3736
Description: Common files for PHP packages
This package contains common utilities shared among all packaged PHP
versions.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Package: dovecot-pop3d
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 764
Maintainer: Dovecot Maintainers <jaldhar-dovecot@debian.org>
Architecture: amd64
Source: dovecot
Version: 1:2.2.27-3+deb9u7
Provides: pop3-server
Depends: dovecot-core (= 1:2.2.27-3+deb9u7), libc6 (>= 2.4), ucf (>= 2.0020)
Suggests: ufw
Conffiles:
/etc/ufw/applications.d/dovecot-pop3d d7befb0a91080dcdb6b4e75219ab2d3c
Description: secure POP3/IMAP server - POP3 daemon
Dovecot is a mail server whose major goals are security and extreme
reliability. It tries very hard to handle all error conditions and verify
that all data is valid, making it nearly impossible to crash. It supports
mbox/Maildir and its own dbox/mdbox formats, and should also be pretty
fast, extensible, and portable.
.
This package contains the Dovecot POP3 server.
Homepage: http://dovecot.org/
Package: libp11-kit0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 439
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: p11-kit
Version: 0.23.3-2+deb9u1
Depends: libc6 (>= 2.16), libffi6 (>= 3.0.4)
Description: library for loading and coordinating access to PKCS#11 modules - runtime
The p11-kit library provides a way to load and enumerate Public-Key
Cryptography Standard #11 modules, along with a standard configuration
setup for installing PKCS#11 modules so that they're discoverable. It
also solves problems with coordinating the use of PKCS#11 by different
components or libraries living in the same process.
.
This package contains the shared library required for applications loading
and accessing PKCS#11 modules.
Homepage: http://p11-glue.freedesktop.org/p11-kit.html
Package: python3-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 120
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.5.3-1
Replaces: python3 (<< 3.3.2-13~), python3.1 (<< 3.1-2)
Depends: python3.5-minimal (>= 3.5.3-1~), dpkg (>= 1.13.20)
Breaks: idle3 (<< 3.1), python3 (<< 3.3.2-13~), python3-all (<< 3.1), python3-all-dbg (<< 3.1), python3-all-dev (<< 3.1), python3-dbg (<< 3.1), python3-dev (<< 3.1), python3-examples (<< 3.1)
Description: minimal subset of the Python language (default python3 version)
This package contains the interpreter and some essential modules. It's used
in the boot process for some basic tasks.
See /usr/share/doc/python3.5-minimal/README.Debian for a list of the modules
contained in this package.
Homepage: http://www.python.org/
Package: python-enum34
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 218
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: enum34
Version: 1.1.6-1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Suggests: python-enum34-doc
Breaks: python-enum
Description: backport of Python 3.4's enum package
PEP 435 adds an enumeration to Python 3.4. This module provides a
backport of that data type for older Python versions. It defines two
enumeration classes that can be used to define unit sets of names and
values: Enum and IntEnum.
.
This is the Python 2 compatible package.
Homepage: https://pypi.python.org/pypi/enum34
Package: gdisk
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 754
Maintainer: Guillaume Delacour <gui@iroqwa.org>
Architecture: amd64
Version: 1.0.1-1+deb9u1
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libncursesw5 (>= 6), libpopt0 (>= 1.14), libstdc++6 (>= 5.2), libtinfo5 (>= 6), libuuid1 (>= 2.16)
Recommends: groff-base
Description: GPT fdisk text-mode partitioning tool
GPT fdisk (aka gdisk) is a text-mode partitioning
tool that works on Globally Unique Identifier
(GUID) Partition Table (GPT) disks, rather than
on the more common (through 2009)
Master Boot Record (MBR) partition tables.
Homepage: http://sourceforge.net/projects/gptfdisk/
Package: libdebconfclient0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 67
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cdebconf
Version: 0.227
Depends: libc6 (>= 2.4)
Description: Debian Configuration Management System (C-implementation library)
Debconf is a configuration management system for Debian packages. It is
used by some packages to prompt you for information before they are
installed. cdebconf is a reimplementation of the original debconf in C.
.
This library allows C programs to interface with cdebconf.
Package: python3-jsonpatch
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 56
Maintainer: PKG OpenStack <openstack-devel@lists.alioth.debian.org>
Architecture: all
Source: python-json-patch
Version: 1.19-4
Replaces: python3-json-patch (<< 1.3-3~)
Depends: python3-json-pointer (>= 1.9), python3:any (>= 3.3.2-2~)
Breaks: python3-json-patch (<< 1.3-3~)
Description: library to apply JSON patches - Python 3.x
Python-json-patch is a Python module (a library) to apply JSON Patches
according to the IETF draft specification.
.
From the IETF site:
.
JavaScript Object Notation (JSON) [RFC4627] is a common format for the
exchange and storage of structured data. HTTP PATCH [RFC5789] extends the
Hypertext Transfer Protocol (HTTP) [RFC2616] with a method to perform partial
modifications to resources.
.
JSON Patch is a format (identified by the media type "application/
json-patch") for expressing a sequence of operations to apply to a target JSON
document, suitable for use with the HTTP PATCH method.
.
This format is also potentially useful in other cases when it's necessary to
make partial updates to a JSON document.
.
This package provides the Python 3.x module.
Homepage: https://github.com/stefankoegl/python-json-patch
Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 209
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libselinux (2.6-3)
Version: 2.6-3+b3
Depends: libc6 (>= 2.14), libpcre3
Description: SELinux runtime shared libraries
This package provides the shared libraries for Security-enhanced
Linux that provides interfaces (e.g. library functions for the
SELinux kernel APIs like getcon(), other support functions like
getseuserbyname()) to SELinux-aware applications. Security-enhanced
Linux is a patch of the Linux kernel and a number of utilities with
enhanced security functionality designed to add mandatory access
controls to Linux. The Security-enhanced Linux kernel contains new
architectural components originally developed to improve the security
of the Flask operating system. These architectural components provide
general support for the enforcement of many kinds of mandatory access
control policies, including those based on the concepts of Type
Enforcement, Role-based Access Control, and Multi-level Security.
.
libselinux1 provides an API for SELinux applications to get and set
process and file security contexts and to obtain security policy
decisions. Required for any applications that use the SELinux
API. libselinux may use the shared libsepol to manipulate the binary
policy if necessary (e.g. to downgrade the policy format to an older
version supported by the kernel) when loading policy.
Homepage: http://userspace.selinuxproject.org/
Package: systemd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 9298
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 232-25+deb9u14
Replaces: udev (<< 228-5)
Depends: libacl1 (>= 2.2.51-8), libapparmor1 (>= 2.9.0-3+exp2), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.19.1), libc6 (>= 2.17), libcap2 (>= 1:2.10), libcryptsetup4 (>= 2:1.4.3), libgcrypt20 (>= 1.7.0), libgpg-error0 (>= 1.14), libidn11 (>= 1.13), libip4tc0 (>= 1.6.0+snapshot20161117), libkmod2 (>= 5~), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libmount1 (>= 2.26.2), libpam0g (>= 0.99.7.1), libseccomp2 (>= 2.3.1), libselinux1 (>= 2.1.9), libsystemd0 (= 232-25+deb9u14), util-linux (>= 2.27.1), mount (>= 2.26), adduser, procps
Pre-Depends: libc6 (>= 2.8)
Recommends: libpam-systemd, dbus
Suggests: systemd-ui, systemd-container, policykit-1
Breaks: adjtimex (<< 1.29-6), aoetools (<< 36-1.1), apparmor (<< 2.10.95-1), arno-iptables-firewall (<< 2.0.1.f-1), atm-tools (<< 1:2.5.1-1.6), clvm (<< 2.02.156-1), cman (<< 3.1.8-1.3+rm), console-common (<< 0.7.89), ebtables (<< 2.0.10.4-3.5), eeepc-acpi-scripts (<< 1.1.12+nmu1), espeakup (<< 1:0.71-27.1), ferm (<< 2.2-3.1), fiaif (<< 1.23.1-4+rm), gfs2-cluster (<< 3.1.8-1), gfs2-utils (<< 3.1.8-1), gom (<< 0.30.2-7), hdparm (<< 9.48+ds-1), ifrename (<< 30~pre9-9), ifscheme (<< 1.7-4), ifupdown (<< 0.8.5~), ifupdown-extra (<< 0.27), ipsec-tools (<< 1:0.8.2+20140711-6), kbd (<< 2.0.3-2), keyboard-configuration (<< 1.141), laptop-mode-tools (<< 1.68~), live-tools (<< 1:20151214+nmu1), lvm2 (<< 2.02.104-1), mdadm (<< 3.4-2), mt-st (<< 1.3-1), multipath-tools (<< 0.5.0+git1.656f8865-3), natlog (<< 1.02.00-4), nbd-client (<< 1:3.14-1), netenv (<< 0.94.3-30+rm), nfs-common (<< 1:1.2.8-9.1), ocfs2-tools (<< 1.8.4-2), pidentd (<< 3.0.19.ds1-7.1), rdnssd (<< 1.0.1-5), rgmanager (<< 3.1.8-1.3+rm), rpcbind (<< 0.2.3-0.1), screen (<< 4.3.1-2), scsitools (<< 0.12-2.3), selinux-basics (<< 0.5.3), setserial (<< 2.17-49), shorewall (<< 5.0.3.1-1), shorewall-init (<< 5.0.3.1-1), shorewall-lite (<< 5.0.3.1-1), shorewall6 (<< 5.0.3.1-1), shorewall6-lite (<< 5.0.3.1-1), srptools (<< 1.0.3-1), switchconf (<< 0.0.15-1), systemd-shim (<< 10-3~), udev (<< 228-5), ufw (<< 0.34-1), virtualbox-guest-x11 (<< 5.0.12-dfsg-2), zfs-fuse (<< 0.7.0-13.1), zvbi (<< 0.2.35-10)
Conffiles:
/etc/dbus-1/system.d/org.freedesktop.hostname1.conf f55c94d000b5d62b5f06d38852977dd1
/etc/dbus-1/system.d/org.freedesktop.locale1.conf 5893ab03e7e96aa3759baceb4dd04190
/etc/dbus-1/system.d/org.freedesktop.login1.conf e2c3673cc09b6340fab20b1e21e80de4
/etc/dbus-1/system.d/org.freedesktop.network1.conf 162e9a90d8f824f79ef2c6390827ec7b
/etc/dbus-1/system.d/org.freedesktop.resolve1.conf 6969148b4616c56a5c9065cec5ab0775
/etc/dbus-1/system.d/org.freedesktop.systemd1.conf c93c16e793f7254a38ce54df08807954
/etc/dbus-1/system.d/org.freedesktop.timedate1.conf 682369fbf3de26b21e775732c89a2bbe
/etc/dhcp/dhclient-exit-hooks.d/timesyncd a891f21f45b0648b7082d999bf424591
/etc/pam.d/systemd-user 3d97692a0125712fcfbd7ddf756f7696
/etc/systemd/journald.conf b89a22c219efce8b3700feafc61e0c18
/etc/systemd/logind.conf aeeac805b4bfb7450183ce346999dd38
/etc/systemd/resolved.conf 6fcc0661ab26fdea8fc71c7af82e5fa9
/etc/systemd/system.conf adc308320471c75a60e07184cf2ebb05
/etc/systemd/timesyncd.conf 54914cf38ff3b8f7dc81b87bb3849520
/etc/systemd/user.conf 675370e2d80a4ad957202e68c1b4aaee
Description: system and service manager
systemd is a system and service manager for Linux. It provides aggressive
parallelization capabilities, uses socket and D-Bus activation for starting
services, offers on-demand starting of daemons, keeps track of processes using
Linux control groups, maintains mount and automount points and implements an
elaborate transactional dependency-based service control logic.
.
systemd is compatible with SysV and LSB init scripts and can work as a
drop-in replacement for sysvinit.
.
Installing the systemd package will not switch your init system unless you
boot with init=/bin/systemd or install systemd-sysv in addition.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Package: libltdl7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 417
Maintainer: Kurt Roeckx <kurt@roeckx.be>
Architecture: amd64
Multi-Arch: same
Source: libtool
Version: 2.4.6-2
Depends: libc6 (>= 2.14)
Description: System independent dlopen wrapper for GNU libtool
This package contains the run-time libltdl library.
.
A small library that aims at hiding the various difficulties of
dlopening libraries from programmers. It is a system independent
dlopen wrapper for GNU libtool.
.
It supports the following dlopen interfaces:
* dlopen (Solaris, Linux and various BSD flavors)
* shl_load (HP-UX)
* LoadLibrary (Win16 and Win32)
* load_add_on (BeOS)
* GNU DLD (emulates dynamic linking for static libraries)
* libtool's dlpreopen
Homepage: http://www.gnu.org/software/libtool/
Package: libhtml-parser-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 229
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 3.72-3
Depends: perl (>= 5.24.1~rc3-3), perlapi-5.24.1, libc6 (>= 2.4), libhtml-tagset-perl, liburi-perl
Recommends: libhttp-message-perl
Suggests: libdata-dump-perl
Enhances: libwww-perl
Description: collection of modules that parse HTML text documents
HTML::Parser is a collection of modules useful for handling HTML documents.
These modules used to be part of the libwww-perl distribution, but are now
unbundled in order to facilitate a separate development track.
.
Objects of the HTML::Parser class will recognize markup and separate it from
content data. As different kinds of markup are recognized, the corresponding
event handler is invoked. The document to be parsed may also be supplied in
arbitrary chunks, making on-the-fly parsing of network documents possible.
Homepage: https://metacpan.org/release/HTML-Parser
Package: liblwres141
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 270
Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u12
Replaces: libbind0
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10), libgeoip1, libxml2 (>= 2.6.27)
Conflicts: libbind0
Description: Lightweight Resolver Library used by BIND
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the liblwres shared library used by BIND's daemons
and clients.
Package: libpython2.7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3565
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python2.7
Version: 2.7.13-2+deb9u6
Replaces: python2.7 (<< 2.6)
Depends: libpython2.7-stdlib (= 2.7.13-2+deb9u6), libc6 (>= 2.15), zlib1g (>= 1:1.2.0)
Description: Shared Python runtime library (version 2.7)
Python is a high-level, interactive, object-oriented language. Its 2.7 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains the shared runtime library, normally not needed
for programs using the statically linked interpreter.
Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6779
Origin: debian
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: amd64
Multi-Arch: foreign
Version: 1.18.26
Replaces: manpages-it (<< 2.80-4)
Depends: tar (>= 1.28-1)
Pre-Depends: libbz2-1.0, libc6 (>= 2.14), liblzma5 (>= 5.2.2), libselinux1 (>= 2.3), zlib1g (>= 1:1.1.4)
Suggests: apt, debsig-verify
Breaks: acidbase (<= 1.4.5-4), amule (<< 2.3.1+git1a369e47-3), beep (<< 1.3-4), im (<< 1:151-4), libdpkg-perl (<< 1.18.11), netselect (<< 0.3.ds1-27), pconsole (<< 1.0-12), phpgacl (<< 3.3.7-7.3), pure-ftpd (<< 1.0.43-1), systemtap (<< 2.8-1), terminatorx (<< 4.0.1-1), xvt (<= 2.1-20.1)
Conffiles:
/etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
/etc/cron.daily/dpkg b8065b6bfc248caba501c3f5bb508e66
/etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
/etc/logrotate.d/dpkg 782ea5ae536f67ff51dc8c3e2eeb4cf9
Description: Debian package management system
This package provides the low-level infrastructure for handling the
installation and removal of Debian software packages.
.
For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg
Package: automake
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1707
Maintainer: Eric Dorland <eric@debian.org>
Architecture: all
Multi-Arch: foreign
Source: automake-1.15
Version: 1:1.15-6
Provides: automake-1.15, automaken
Depends: autoconf (>= 2.65), autotools-dev (>= 20020320.1)
Suggests: autoconf-doc, gnu-standards
Conflicts: automake (<< 1:1.4-p5-1), automake1.10-doc, automake1.5 (<< 1.5-2), automake1.6 (<< 1.6.1-4)
Description: Tool for generating GNU Standards-compliant Makefiles
Automake is a tool for automatically generating `Makefile.in's from
files called `Makefile.am'.
.
The goal of Automake is to remove the burden of Makefile maintenance
from the back of the individual GNU maintainer (and put it on the back
of the Automake maintainer).
.
The `Makefile.am' is basically a series of `make' macro definitions
(with rules being thrown in occasionally). The generated
`Makefile.in's are compliant with the GNU Makefile standards.
.
Automake 1.15 fails to work in a number of situations that Automake
1.4, 1.6, 1.7, 1.8, 1.9, 1.10, 1.11 and 1.14 did, so previous versions are
available as separate packages.
Homepage: https://www.gnu.org/software/automake/
Package: python-cryptography
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1456
Maintainer: Tristan Seligmann <mithrandi@debian.org>
Architecture: amd64
Version: 1.7.1-3+deb9u2
Depends: python (<< 2.8), python (>= 2.7~), python-cffi-backend-api-min (<= 9729), python-cffi-backend-api-max (>= 9729), python-enum34, python-idna (>= 2.0), python-ipaddress, python-pyasn1 (>= 0.1.8), python-setuptools (>= 11.3), python-six (>= 1.4.1), python:any (<< 2.8), python:any (>= 2.7.5-5~), libc6 (>= 2.4), libssl1.1 (>= 1.1.0)
Suggests: python-cryptography-doc, python-cryptography-vectors
Breaks: python-openssl (<< 16.0.0)
Description: Python library exposing cryptographic recipes and primitives (Python 2)
The cryptography library is designed to be a "one-stop-shop" for
all your cryptographic needs in Python.
.
As an alternative to the libraries that came before it, cryptography
tries to address some of the issues with those libraries:
- Lack of PyPy and Python 3 support.
- Lack of maintenance.
- Use of poor implementations of algorithms (i.e. ones with known
side-channel attacks).
- Lack of high level, "Cryptography for humans", APIs.
- Absence of algorithms such as AES-GCM.
- Poor introspectability, and thus poor testability.
- Extremely error prone APIs, and bad defaults.
.
This package contains the Python 2 version of cryptography.
Homepage: https://cryptography.io/
Package: dovecot-imapd
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 1155
Maintainer: Dovecot Maintainers <jaldhar-dovecot@debian.org>
Architecture: amd64
Source: dovecot
Version: 1:2.2.27-3+deb9u7
Provides: imap-server
Depends: dovecot-core (= 1:2.2.27-3+deb9u7), libbz2-1.0, libc6 (>= 2.14), liblz4-1 (>= 0.0~r113), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.1.4), ucf (>= 2.0020)
Suggests: ufw
Conffiles:
/etc/ufw/applications.d/dovecot-imapd 8cc92cf8997bb751d436a5521c6d1287
Description: secure POP3/IMAP server - IMAP daemon
Dovecot is a mail server whose major goals are security and extreme
reliability. It tries very hard to handle all error conditions and verify
that all data is valid, making it nearly impossible to crash. It supports
mbox/Maildir and its own dbox/mdbox formats, and should also be pretty
fast, extensible, and portable.
.
This package contains the Dovecot IMAP server.
Homepage: http://dovecot.org/
Package: php-pear
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 2052
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Version: 1:1.10.1+submodules+notgz-9+deb9u3
Provides: php-console-getopt, php-structures-graph, php-xml-util
Depends: php-cli, php-common, php-xml
Breaks: php-pear-frontend-gtk (<< 0.4.0), php-pear-frontend-web (<= 0.4)
Description: PEAR Base System
The PEAR package contains:
* the PEAR installer, for creating, distributing
and installing packages
* the PEAR_Exception PHP error handling mechanism
* the PEAR_ErrorStack advanced error handling mechanism
* the PEAR_Error error handling mechanism
* the OS_Guess class for retrieving info about the OS
where PHP is running on
* the System class for quick handling of common operations
with files and directories
* the PEAR base class
Features in a nutshell:
* full support for channels
* pre-download dependency validation
* new package.xml 2.0 format allows tremendous flexibility while maintaining
BC
* support for optional dependency groups and limited support for
sub-packaging
* robust dependency support
* full dependency validation on uninstall
* remote install for hosts with only ftp access - no more problems with
restricted host installation
* full support for mirroring
* support for bundling several packages into a single tarball
* support for static dependencies on a url-based package
* support for custom file roles and installation tasks
Homepage: http://pear.php.net/package/PEAR
Package: libmagickwand-6.q16-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1414
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:6.9.7.4+dfsg-11+deb9u14
Depends: libc6 (>= 2.4), libgcc1 (>= 1:3.3.1), libgomp1 (>= 4.9), libmagickcore-6.q16-3 (>= 8:6.9.6.8), libx11-6, imagemagick-6-common (>= 8:6.9.6.2+dfsg-3)
Pre-Depends: dpkg (>= 1.17.6)
Description: image manipulation library -- quantum depth Q16
The MagickWand API is the recommended interface between the C programming
language and the ImageMagick image processing libraries. Unlike the
MagickCore C API, MagickWand uses only a few opaque types. Accessors are
available to set or get important wand properties.
.
This package contains the C libraries needed to run executables that make
use of MagickWand.
.
This version of libmagickwand is compiled for a channel
depth of 16 bits (Q16).
Homepage: http://www.imagemagick.org/
Package: openssl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1316
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.1.0l-1~deb9u6
Depends: libc6 (>= 2.15), libssl1.1 (>= 1.1.0)
Suggests: ca-certificates
Conffiles:
/etc/ssl/openssl.cnf f697ef5df0d006882e6326606e8dbf4a
Description: Secure Sockets Layer toolkit - cryptographic utility
This package is part of the OpenSSL project's implementation of the SSL
and TLS cryptographic protocols for secure communication over the
Internet.
.
It contains the general-purpose command line binary /usr/bin/openssl,
useful for cryptographic operations such as:
* creating RSA, DH, and DSA key parameters;
* creating X.509 certificates, CSRs, and CRLs;
* calculating message digests;
* encrypting and decrypting with ciphers;
* testing SSL/TLS clients and servers;
* handling S/MIME signed or encrypted mail.
Homepage: https://www.openssl.org/
Package: wget
Status: install ok installed
Priority: important
Section: web
Installed-Size: 2747
Maintainer: Noël Köthe <noel@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.18-5+deb9u3
Depends: libc6 (>= 2.17), libgnutls30 (>= 3.5.6), libidn11 (>= 1.13), libnettle6, libpcre3, libpsl5 (>= 0.13.0), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: wget-ssl
Conffiles:
/etc/wgetrc c43064699caf6109f4b3da0405c06ebb
Description: retrieves files from the web
Wget is a network utility to retrieve files from the web
using HTTP(S) and FTP, the two most widely used internet
protocols. It works non-interactively, so it will work in
the background, after having logged off. The program supports
recursive retrieval of web-authoring pages as well as FTP
sites -- you can use Wget to make mirrors of archives and
home pages or to travel the web like a WWW robot.
.
Wget works particularly well with slow or unstable connections
by continuing to retrieve a document until the document is fully
downloaded. Re-getting files from where it left off works on
servers (both HTTP and FTP) that support it. Both HTTP and FTP
retrievals can be time stamped, so Wget can see if the remote
file has changed since the last retrieval and automatically
retrieve the new version if it has.
.
Wget supports proxy servers; this can lighten the network load,
speed up retrieval, and provide access behind firewalls.
Homepage: https://www.gnu.org/software/wget/
Package: ruby-net-telnet
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 57
Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.1.1-2
Description: telnet client library
This package provides a telnet client library to use in Ruby programs. It used
to be part of the Ruby standard library before Ruby 2.3, and was extracted to
a standalone package.
Homepage: https://github.com/ruby/net-telnet
Ruby-Versions: all
Package: vim-common
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 276
Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Architecture: all
Source: vim
Version: 2:8.0.0197-4+deb9u7
Replaces: vim-gui-common (<< 2:7.4.488-4~)
Depends: xxd
Recommends: vim | vim-gtk | vim-gtk3 | vim-athena | vim-nox | vim-tiny
Breaks: vim-gui-common (<< 2:7.4.488-4~)
Conffiles:
/etc/vim/vimrc 00311318b37b5b8a101c136ac1e78b0b
Description: Vi IMproved - Common files
Vim is an almost compatible version of the UNIX editor Vi.
.
This package contains files shared by all non GUI-enabled vim variants
available in Debian. Examples of such shared files are: manpages and
configuration files.
Homepage: http://www.vim.org/
Package: roundcube
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 13
Maintainer: Debian Roundcube Maintainers <pkg-roundcube-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.2.3+dfsg.1-4+deb9u10
Depends: roundcube-core (= 1.2.3+dfsg.1-4+deb9u10)
Pre-Depends: dpkg (>= 1.17.14)
Breaks: roundcube-core (<< 1.1.1+dfsg.1-1)
Description: skinnable AJAX based webmail solution for IMAP servers - metapackage
RoundCube Webmail is a browser-based multilingual IMAP client with an
application-like user interface. It provides full functionality
expected from an e-mail client, including MIME support, address book,
folder manipulation and message filters.
.
The user interface is fully skinnable using XHTML and CSS 2.
.
This package will install a full roundcube application.
Homepage: https://www.roundcube.net/
Package: libcgi-pm-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 478
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 4.35-1
Depends: perl, libhtml-parser-perl
Recommends: libcgi-fast-perl (>= 1:2.01)
Breaks: git (<< 1:2.1.3), libcgi-fast-perl (<< 1:2)
Description: module for Common Gateway Interface applications
CGI.pm is a Perl module that provides classes useful for creating Web forms
and for parsing their contents. It defines CGI objects, entities that contain
the values of the current query string and other state variables.
Homepage: https://metacpan.org/release/CGI
Package: apt-listchanges
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 368
Maintainer: Robert Luberda <robert@debian.org>
Architecture: all
Version: 3.10
Depends: apt (>= 0.5.3), debianutils (>= 2.0.2), python3-apt (>= 0.7.93), ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0, python3:any (>= 3.5~)
Suggests: default-mta | mail-transport-agent, python3-gi, www-browser, x-terminal-emulator
Conffiles:
/etc/apt/apt.conf.d/20listchanges 11de4ec5529e3d15680d37d653ce1c07
Description: package change history notification tool
The tool apt-listchanges can compare a new version of a
package with the one currently installed and show what has been
changed, by extracting the relevant entries from the Debian changelog
and NEWS files.
.
It can be run on several .deb archives at a time to get a list of all
changes that would be caused by installing or upgrading a group of
packages. When configured as an APT plugin it will do this
automatically during upgrades.
Package: libopts25
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 168
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: amd64
Multi-Arch: same
Source: autogen
Version: 1:5.18.12-3
Replaces: autogen
Depends: libc6 (>= 2.14)
Description: automated option processing library based on autogen
This package contains the shared libraries needed by binaries that use
autoopts for option processing. The package containing the header files
and static libraries is libopts25-dev. The package containing the
development tools is autogen.
Homepage: http://www.gnu.org/software/autogen/
Package: libsqlite3-0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1163
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: sqlite3
Version: 3.16.2-5+deb9u3
Depends: libc6 (>= 2.14)
Description: SQLite 3 shared library
SQLite is a C library that implements an SQL database engine.
Programs that link with the SQLite library can have SQL database
access without running a separate RDBMS process.
Homepage: http://www.sqlite.org/
Package: libbison-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 438
Maintainer: Chuan-kai Lin <cklin@debian.org>
Architecture: amd64
Multi-Arch: same
Source: bison (2:3.0.4.dfsg-1)
Version: 2:3.0.4.dfsg-1+b1
Recommends: bison
Description: YACC-compatible parser generator - development library
Bison is a general-purpose parser generator that converts a
grammar description for an LALR(1) context-free grammar into a C
program to parse that grammar. Once you are proficient with Bison, you
may use it to develop a wide range of language parsers, from those used
in simple desk calculators to complex programming languages.
.
This package provides the liby.a file including functions needed by
yacc parsers.
Homepage: http://www.gnu.org/software/bison/
Package: imagemagick
Status: install ok installed
Priority: extra
Section: oldlibs
Installed-Size: 197
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 8:6.9.7.4+dfsg-11+deb9u14
Depends: imagemagick-6.q16 (>= 8:6.9.2.10+dfsg-2~)
Description: image manipulation programs -- binaries
ImageMagick is a software suite to create, edit, and compose bitmap images.
It can read, convert and write images in a variety of formats (over 100)
including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript,
SVG, and TIFF. Use ImageMagick to translate, flip, mirror, rotate, scale,
shear and transform images, adjust image colors, apply various special
effects, or draw text, lines, polygons, ellipses and Bézier curves.
All manipulations can be achieved through shell commands as well as through
an X11 graphical interface (display).
.
This package include links to channel depth specific binaries and manual
pages.
.
This is a dummy package. You can safely purge or remove it.
Homepage: http://www.imagemagick.org/
Package: libdigest-hmac-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 76
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.03+dfsg-1
Depends: perl
Description: module for creating standard message integrity checks
HMAC is used for message integrity checks between two parties
that share a secret key, and works in combination with some other
Digest algorithm, usually MD5 or SHA-1. The HMAC mechanism
is described in RFC 2104.
.
The Digest::HMAC module follow the common Digest:: interface,
but the constructor takes the secret key and the name of some
other simple Digest:: module as argument.
Homepage: http://search.cpan.org/dist/Digest-HMAC/
Package: python3-requests
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 507
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: requests
Version: 2.12.4-1
Depends: python3-urllib3 (<< 1.19.2), python3:any (>= 3.3.2-2~), ca-certificates, python3-chardet, python3-urllib3 (>= 1.19.1)
Suggests: python3-cryptography, python3-idna, python3-openssl, python3-socks
Description: elegant and simple HTTP library for Python3, built for human beings
Requests allow you to send HTTP/1.1 requests. You can add headers, form data,
multipart files, and parameters with simple Python dictionaries, and access
the response data in the same way. It's powered by httplib and urllib3, but
it does all the hard work and crazy hacks for you.
.
Features
.
- International Domains and URLs
- Keep-Alive & Connection Pooling
- Sessions with Cookie Persistence
- Browser-style SSL Verification
- Basic/Digest Authentication
- Elegant Key/Value Cookies
- Automatic Decompression
- Unicode Response Bodies
- Multipart File Uploads
- Connection Timeouts
.
This package contains the Python 3 version of the library.
Homepage: http://python-requests.org
Package: libfile-listing-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 56
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.04-1
Replaces: libwww-perl (<< 6.00)
Depends: perl, libhttp-date-perl
Breaks: libwww-perl (<< 6.00)
Description: module to parse directory listings
File::Listing exports a single function called parse_dir(), which can be used
to parse directory listings.
.
The first parameter to parse_dir() is the directory listing to parse. It can
be a scalar, a reference to an array of directory lines or a glob
representing a filehandle to read the directory listing from.
.
The second parameter is the time zone to use when parsing time stamps in the
listing. If this value is undefined, then the local time zone is assumed.
.
The third parameter is the type of listing to assume. Currently supported
formats are 'unix', 'apache' and 'dosftp'. The default value 'unix'.
Homepage: http://search.cpan.org/dist/File-Listing/
Package: libmail-dkim-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 320
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: all
Version: 0.40-1
Replaces: dkimproxy (<< 1.2-1)
Depends: perl, liberror-perl, libdigest-sha-perl, libmailtools-perl, libnet-dns-perl, libcrypt-openssl-rsa-perl (>= 0.24)
Breaks: dkimproxy (<< 1.2-1)
Description: cryptographically identify the sender of email - perl library
RFC 4871, DomainKeys Identified Mail (DKIM), defines a domain-level
authentication framework for email using public-key cryptography and
key server technology to permit verification of the source and
contents of messages by either Mail Transport Agents (MTAs) or Mail
User Agents (MUAs).
.
This is a Perl implementation created by Jason Long of Messiah
College. It performs signing as well as signature verification. It
also supports the older DomainKeys standard.
Homepage: http://dkimproxy.sourceforge.net
Package: libio-string-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 59
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.08-3
Depends: perl
Description: Emulate IO::File interface for in-core strings
The IO::String module provide the IO::File interface for in-core
strings. An IO::String object can be attached to a string, and
will make it possible to use the normal file operations for reading or
writing data, as well as seeking to various locations of the string.
The main reason you might want to do this, is if you have some other
library module that only provide an interface to file handles, and you
want to keep all the stuff in memory.
.
The IO::String module provide an interface compatible with
IO::File as distributed with IO-1.20, but the following methods
are not available; new_from_fd, fdopen, format_write,
format_page_number, format_lines_per_page, format_lines_left,
format_name, format_top_name.
Homepage: https://metacpan.org/release/IO-String/
Package: tasksel-data
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 213
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: all
Source: tasksel
Version: 3.39
Depends: tasksel (= 3.39)
Recommends: laptop-detect
Conflicts: tasksel (<< 2.67)
Description: official tasks used for installation of Debian systems
This package contains data about the standard tasks available on a Debian
system.
Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 3539
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Version: 1.4.11
Replaces: apt-utils (<< 1.3~exp2~)
Depends: adduser, gpgv | gpgv2 | gpgv1, debian-archive-keyring, init-system-helpers (>= 1.18~), libapt-pkg5.0 (>= 1.3~rc2), libc6 (>= 2.15), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Recommends: gnupg | gnupg2 | gnupg1
Suggests: apt-doc, aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), powermgmt-base, python-apt
Breaks: apt-utils (<< 1.3~exp2~)
Conffiles:
/etc/apt/apt.conf.d/01autoremove 0b1391c01d75f95fa4ea5ac01219b515
/etc/cron.daily/apt-compat bc4a71cbcaeed4179f25d798257fa980
/etc/kernel/postinst.d/apt-auto-removal 4ad976a68f045517cf4696cec7b8aa3a
/etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
This package provides commandline tools for searching and
managing as well as querying information about packages
as a low-level access to all features of the libapt-pkg library.
.
These include:
* apt-get for retrieval of packages and information about them
from authenticated sources and for installation, upgrade and
removal of packages together with their dependencies
* apt-cache for querying available information about installed
as well as installable packages
* apt-cdrom to use removable media as a source for packages
* apt-config as an interface to the configuration settings
* apt-key as an interface to manage authentication keys
Package: libnet-ident-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 61
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.24-1
Depends: perl
Description: Perl module to lookup the username on the remote end of a TCP/IP connection
Net::Ident is a Perl module implementing the RFC1413 Identification Protocol,
also known as "ident".
.
It provides both a simple interface for doing one ident lookup at a time, and
an asynchronous interface to perform (possibly) many simultaneous lookups, or
simply continue serving other things while the lookup is proceeding.
Homepage: https://metacpan.org/release/Net-Ident
Package: liblocale-gettext-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 51
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: liblocale-gettext-perl (1.07-3)
Version: 1.07-3+b1
Depends: libc6 (>= 2.2.5)
Pre-Depends: perl-base (>= 5.24.1~rc3-2), perlapi-5.24.1
Description: module using libc functions for internationalization in Perl
The Locale::gettext module permits access from perl to the gettext() family of
functions for retrieving message strings from databases constructed
to internationalize software.
.
It provides gettext(), dgettext(), dcgettext(), textdomain(),
bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
and dngettext().
Homepage: https://metacpan.org/release/gettext
Package: libmpfr4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 824
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mpfr4
Version: 3.1.5-1
Depends: libc6 (>= 2.14), libgmp10
Breaks: libgmp3 (<< 4.1.4-3)
Description: multiple precision floating-point computation
MPFR provides a library for multiple-precision floating-point computation
with correct rounding. The computation is both efficient and has a
well-defined semantics. It copies the good ideas from the
ANSI/IEEE-754 standard for double-precision floating-point arithmetic
(53-bit mantissa).
Homepage: http://www.mpfr.org/
Package: python-funcsigs
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 69
Maintainer: PKG OpenStack <openstack-devel@lists.alioth.debian.org>
Architecture: all
Version: 1.0.2-3
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Suggests: python-funcsigs-doc
Description: function signatures from PEP362 - Python 2.7
funcsigs is a backport of the PEP 362 function signature features from Python
3.3's inspect module. The backport is compatible with Python 2.6, 2.7 as well
as 3.2 and up.
.
This package contains the Python 2.7 module.
Homepage: http://funcsigs.readthedocs.org
Package: dmsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 236
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: lvm2 (2.02.168-2)
Version: 2:1.02.137-2
Depends: libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.131)
Description: Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but software raid,
and other drivers that create "virtual" block devices.
.
This package contains a utility for modifying device mappings.
Homepage: http://sources.redhat.com/lvm2/
Package: libxpm4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 104
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxpm
Version: 1:3.5.12-1
Depends: libc6 (>= 2.14), libx11-6
Description: X11 pixmap library
The X PixMap image format is an extension of the monochrome X BitMap
format specified in the X protocol, and is commonly used in traditional
X applications.
.
This package provides runtime support for XPM format.
Homepage: https://www.x.org
Package: libclone-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 39
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libclone-perl (0.38-2)
Version: 0.38-2+b1
Depends: perl (>= 5.24.1~rc3-2), perlapi-5.24.1, libc6 (>= 2.2.5)
Description: module for recursively copying Perl datatypes
The Clone module provides a clone() method which makes recursive copies of
nested hash, array, scalar and reference types, including tied variables and
objects.
.
It is faster (although less flexible) than Storable's dclone. Its
functionality is _not_ serializing in-memory objects (i.e. as
Data::Dumper or YAML::Dump do), but deep-copying them over to new
in-memory structures.
Homepage: https://metacpan.org/release/Clone
Package: rubygems-integration
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 20
Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.11
Depends: ca-certificates
Suggests: bundler
Description: integration of Debian Ruby packages with Rubygems
rubygems-integration makes Debian Ruby packages recognizable by Rubygems.
Debian Ruby packages may be used to satisfy Rubygems dependencies both with
plain Rubygems and with Bundler. This also allows one to use Debian Ruby
packages to satisfy dependencies in Rails 3 applications.
Package: pciutils
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 1220
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1:3.5.2-1
Depends: libc6 (>= 2.14), libkmod2 (>= 5~), libpci3 (= 1:3.5.2-1)
Suggests: bzip2, wget | curl | lynx-cur
Description: Linux PCI Utilities
This package contains various utilities for inspecting and setting of
devices connected to the PCI bus.
Homepage: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml
Package: php-symfony-console
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 481
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Source: symfony
Version: 2.8.7+dfsg-1.3+deb9u3
Depends: php-common, php-symfony-polyfill-mbstring (>= 1.0), php-symfony-polyfill-mbstring (<< 2~~)
Suggests: php-symfony-event-dispatcher, php-symfony-process, php-psr-log
Description: run tasks from the command line
The Symfony Console Component can be used to implement recurring
or long running tasks, such as cronjobs, imports or other batch
jobs. Additionally it assists the creation of nice looking command
line interfaces.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com/doc/2.8/components/console/introduction.html
Package: libclass-trigger-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 72
Maintainer: Bart Martens <bartm@debian.org>
Architecture: all
Version: 0.14-1
Depends: perl, libio-stringy-perl, libclass-data-inheritable-perl (>= 0.02)
Description: Mix-in to add / call inheritable triggers
Class::Trigger is a mixin class to add / call triggers (or hooks)
that get called at some points you specify.
Homepage: http://search.cpan.org/dist/Class-Trigger/
Package: python-zope.hookable
Status: install ok installed
Priority: extra
Section: zope
Installed-Size: 53
Maintainer: Debian/Ubuntu Zope Team <pkg-zope-developers@lists.alioth.debian.org>
Architecture: amd64
Source: zope.hookable (4.0.4-4)
Version: 4.0.4-4+b2
Depends: python (<< 2.8), python (>= 2.7~), python-pkg-resources, python:any (>= 2.7.5-5~), libc6 (>= 2.4)
Conflicts: zope3
Description: Hookable object support
This package provides support for Hookable object.
.
This is the Python 2 version.
Homepage: http://pypi.python.org/pypi/zope.hookable
Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1327
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Version: 1:3.5-3
Replaces: diff
Pre-Depends: libc6 (>= 2.17)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
The diffutils package provides the diff, diff3, sdiff, and cmp programs.
.
`diff' shows differences between two files, or each corresponding file
in two directories. `cmp' shows the offsets and line numbers where
two files differ. `cmp' can also show all the characters that
differ between the two files, side by side. `diff3' shows differences
among three files. `sdiff' merges two files interactively.
.
The set of differences produced by `diff' can be used to distribute
updates to text files (such as program source code) to other people.
This method is especially useful when the differences are small compared
to the complete files. Given `diff' output, the `patch' program can
update, or "patch", a copy of the file.
Homepage: http://www.gnu.org/software/diffutils/
Package: python-requests
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 511
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: requests
Version: 2.12.4-1
Depends: python-urllib3 (>= 1.19.1), python:any (<< 2.8), python:any (>= 2.7.5-5~), ca-certificates, python-chardet, python-urllib3 (<< 1.19.2)
Suggests: python-cryptography, python-idna, python-openssl, python-socks
Breaks: httpie (<< 0.9.2)
Description: elegant and simple HTTP library for Python2, built for human beings
Requests allow you to send HTTP/1.1 requests. You can add headers, form data,
multipart files, and parameters with simple Python dictionaries, and access
the response data in the same way. It's powered by httplib and urllib3, but
it does all the hard work and crazy hacks for you.
.
Features
.
- International Domains and URLs
- Keep-Alive & Connection Pooling
- Sessions with Cookie Persistence
- Browser-style SSL Verification
- Basic/Digest Authentication
- Elegant Key/Value Cookies
- Automatic Decompression
- Unicode Response Bodies
- Multipart File Uploads
- Connection Timeouts
Homepage: http://python-requests.org
Package: man-db
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 2231
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.7.6.1-2
Replaces: man, manpages-de (<< 0.5-4), manpages-zh (<< 1.5.2-1.1), nlsutils
Provides: man, man-browser
Depends: groff-base (>= 1.18.1.1-15), bsdmainutils, debconf (>= 1.2.0) | debconf-2.0, libc6 (>= 2.17), libgdbm3 (>= 1.8.3), libpipeline1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Pre-Depends: dpkg (>= 1.16.1~)
Suggests: groff, less, www-browser
Breaks: manpages-zh (<< 1.5.2-1.1)
Conflicts: man, suidmanager (<< 0.50)
Conffiles:
/etc/cron.daily/man-db 66756dda467471df4f38b71a69a10393
/etc/cron.weekly/man-db 40fa232bff2326e0f82837a360d0055f
/etc/manpath.config 6945cded2bf5630e953a5a12aaca5232
Description: on-line manual pager
This package provides the man command, the primary way of examining the
on-line help files (manual pages). Other utilities provided include the
whatis and apropos commands for searching the manual page database, the
manpath utility for determining the manual page search path, and the
maintenance utilities mandb, catman and zsoelim. man-db uses the groff
suite of programs to format and display the manual pages.
Homepage: http://man-db.nongnu.org/
Package: php-composer-spdx-licenses
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 55
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Version: 1.1.5-1
Depends: php-common
Description: SPDX licenses list and validation library
This library has been split away from Composer.
.
Composer helps you declare, manage and install dependencies of PHP projects,
ensuring you have the right stack everywhere.
Homepage: https://github.com/composer/spdx-licenses
Package: libhttp-message-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 184
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.11-1
Replaces: libwww-perl (<< 6.00)
Depends: perl, libencode-locale-perl, libhttp-date-perl, libio-html-perl, liblwp-mediatypes-perl, liburi-perl, perl (>= 5.11) | libio-compress-perl
Breaks: libwww-perl (<< 6.00)
Description: perl interface to HTTP style messages
The HTTP::Message distribution contains classes useful for representing the
messages passed in HTTP style communication. These are classes representing
requests, responses and the headers contained within them.
.
The HTTP::Headers class encapsulates HTTP-style message headers. The headers
consist of attribute-value pairs also called fields, which may be repeated,
and which are printed in a particular order. The field names are cases
insensitive.
.
Instances of this class are usually created as member variables of the
HTTP::Request and HTTP::Response classes, internal to the library.
Homepage: https://metacpan.org/release/HTTP-Message
Package: g++
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 15
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Source: gcc-defaults (1.168)
Version: 4:6.3.0-4
Provides: c++-compiler
Depends: cpp (>= 4:6.3.0-4), gcc (>= 4:6.3.0-4), g++-6 (>= 6.3.0-9~), gcc-6 (>= 6.3.0-9~)
Suggests: g++-multilib
Description: GNU C++ compiler
This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
.
This is a dependency package providing the default GNU C++ compiler.
Package: cloud-initramfs-growroot
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 48
Maintainer: Debian Cloud <debian-cloud@lists.debian.org>
Architecture: all
Source: cloud-initramfs-tools
Version: 0.18.debian5
Depends: cloud-utils (>= 0.26-2~), initramfs-tools, util-linux (>= 2.17.2)
Description: automatically resize the root partition on first boot
This package adds functionality to an initramfs built by initramfs-tools.
When installed, the initramfs will repartition a disk to make the
root volume consume all space that follows it.
.
You most likely do not want this package unless you know what you are
doing. It is primarily interesting in a virtualized environment when
a disk can provisioned with a size larger than its original size.
In this case, with this package installed, you can automatically use
the new space without requiring a reboot to re-read the partition table.
Homepage: http://launchpad.net/cloud-initramfs-tools
Package: libnet-http-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 62
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.12-1
Replaces: libwww-perl (<< 6.00)
Depends: perl, perl (>= 5.19.8) | libio-socket-ip-perl | libio-socket-inet6-perl, liburi-perl
Recommends: libio-socket-ssl-perl
Breaks: libwww-perl (<< 6.00)
Description: module providing low-level HTTP connection client
The Net::HTTP class is a low-level HTTP client. An instance of the
Net::HTTP class represents a connection to an HTTP server. The
HTTP protocol is described in RFC 2616. The Net::HTTP class
supports HTTP/1.0 and HTTP/1.1. Net::HTTP is a sub-class of IO::Socket::INET.
You can mix its methods with reading and writing from the socket directly.
This is not necessarily a good idea, unless you know what you are doing.
Homepage: https://metacpan.org/release/Net-HTTP
Package: libnfnetlink0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 61
Maintainer: Alexander Wirt <formorer@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnfnetlink
Version: 1.0.1-3
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Netfilter netlink library
libnfnetlink is the low-level library for netfilter related
kernel/userspace communication. It provides a generic messaging
infrastructure for in-kernel netfilter subsystems (such as
nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their
respective users and/or management tools in userspace.
Package: pinentry-curses
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 99
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Source: pinentry
Version: 1.0.0-2
Provides: pinentry
Depends: libassuan0 (>= 2.0.1), libc6 (>= 2.14), libgpg-error0 (>= 1.14), libncursesw5 (>= 6), libtinfo5 (>= 6)
Suggests: pinentry-doc
Enhances: gnupg-agent
Description: curses-based PIN or pass-phrase entry dialog for GnuPG
This package contains a program that allows for secure entry of PINs or
pass phrases. That means it tries to take care that the entered
information is not swapped to disk or temporarily stored anywhere.
This functionality is particularly useful for entering pass phrases
when using encryption software such as GnuPG or e-mail clients using
the same. It uses an open protocol and is therefore not tied to
particular software.
.
The program contained in this package implements a PIN entry dialog
using the curses tool kit, meaning that it is useful for users
working in text mode without the X Window System. There are sibling
packages that implement PIN entry dialogs that use an X tool kit. If
you install any of the graphical packages then this package is not
necessary because the sibling packages automatically fall back to
text mode if X is not active.
Homepage: https://www.gnupg.org/related_software/pinentry/
Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 874
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.6
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.15), libdb5.3, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.1.9), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.8-3.6)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
/etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
/etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
/etc/security/limits.conf 11c27ba00b7bd6a255f33126f75c5005
/etc/security/namespace.conf 6424c99a62ddf4b7d3ca713bb06ded89
/etc/security/namespace.init d9e6a7c85e966427ef23a04ec6c7000f
/etc/security/pam_env.conf ddee4a931170dc21b4e0b9bb28e02a7b
/etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
/etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
This package completes the set of modules for PAM. It includes the
pam_unix.so module as well as some specialty modules.
Homepage: http://www.linux-pam.org/
Package: python3-urllib3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 303
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: python-urllib3
Version: 1.19.1-1+deb9u1
Depends: python3:any (>= 3.3.2-2~), python3-six
Recommends: ca-certificates
Suggests: python3-cryptography, python3-idna, python3-openssl, python3-socks
Description: HTTP library with thread-safe connection pooling for Python3
urllib3 supports features left out of urllib and urllib2 libraries.
.
- Re-use the same socket connection for multiple requests (HTTPConnectionPool
and HTTPSConnectionPool) (with optional client-side certificate
verification).
- File posting (encode_multipart_formdata).
- Built-in redirection and retries (optional).
- Supports gzip and deflate decoding.
- Thread-safe and sanity-safe.
- Small and easy to understand codebase perfect for extending and
building upon.
.
This package contains the Python 3 version of the library.
Homepage: http://urllib3.readthedocs.org
Package: util-linux-locales
Status: install ok installed
Priority: optional
Section: localization
Installed-Size: 6169
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: all
Source: util-linux
Version: 2.29.2-1+deb9u1
Replaces: util-linux (<< 2.11b)
Depends: util-linux (>= 2.29.2)
Description: locales files for util-linux
This package contains the internationalization files for the util-linux
package.
.
They are needed when you want the programs in util-linux to print their
messages in other languages than English.
Package: libmpc3
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 111
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mpclib3 (1.0.3-1)
Version: 1.0.3-1+b2
Depends: libc6 (>= 2.4), libgmp10, libmpfr4 (>= 3.1.3)
Description: multiple precision complex floating-point library
MPC is a portable library written in C for arbitrary precision
arithmetic on complex numbers providing correct rounding. For the time
being, it contains all arithmetic operations over complex numbers, the
exponential and the logarithm functions, the trigonometric and
hyperbolic functions.
.
Ultimately, it should implement a multiprecision equivalent of the ISO
C99 standard.
.
It builds upon the GNU MP and the MPFR libraries.
Homepage: http://www.multiprecision.org/mpc/
Package: libstdc++6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1998
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Replaces: libstdc++6-6-dbg (<< 4.9.0-3)
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.18), libgcc1 (>= 1:4.2)
Breaks: blockattack (<= 1.4.1+ds1-2.1+b2), boo (<= 0.9.5~git20110729.r1.202a430-2), c++-annotations (<= 10.2.0-1), clustalx (<= 2.1+lgpl-3), dff (<= 1.3.0+dfsg.1-4.1+b3), digikam-private-libs (<= 4:4.4.0-1.1+b2), emscripten (<= 1.22.1-1), ergo (<= 3.4.0-1), fceux (<= 2.2.2+dfsg0-1), fiona (<= 1.5.1-2), flush (<= 0.9.12-3.1), freeorion (<= 0.4.4+git20150327-2), fslview (<= 4.0.1-4), fwbuilder (<= 5.1.0-4), gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2), gnote (<= 3.16.2-1), gnudatalanguage (<= 0.9.5-2+b2), innoextract (<= 1.4-1+b1), libantlr-dev (<= 2.7.7+dfsg-6), libapache2-mod-passenger (<= 5.0.7-1), libaqsis1 (<= 1.8.2-1), libassimp3 (<= 3.0~dfsg-4), libboost-date-time1.54.0, libboost-date-time1.55.0, libchemps2-1 (<= 1.5-1), libcpprest2.4 (<= 2.4.0-2), libdap17 (<= 3.14.0-2), libdapclient6 (<= 3.14.0-2), libdapserver7 (<= 3.14.0-2), libdavix0 (<= 0.4.0-1+b1), libdballe6 (<= 6.8-1), libdiet-admin2.8 (<= 2.8.0-1+b3), libdiet-client2.8 (<= 2.8.0-1+b3), libdiet-sed2.8 (<= 2.8.0-1+b3), libfreefem++ (<= 3.37.1-1), libgazebo5 (<= 5.0.1+dfsg-2.1), libgetfem4++ (<= 4.2.1~beta1~svn4635~dfsg-3+b1), libgmsh2 (<= 2.9.3+dfsg1-1), libinsighttoolkit4.7 (<= 4.7.2-2), libkolabxml1 (<= 1.1.0-3), libmarisa0 (<= 0.2.4-8), libogre-1.8.0 (<= 1.8.0+dfsg1-7+b1), libogre-1.9.0 (<= 1.9.0+dfsg1-4), libopencv-core2.4, libopenmpi1.6, libopenwalnut1 (<= 1.4.0~rc1+hg3a3147463ee2-1+b1), libpqxx-4.0 (<= 4.0.1+dfsg-3), libreoffice-core (<= 1:4.4.5-2), librime1 (<= 1.2+dfsg-2), libsigc++-2.0-0c2a (<= 2.4.1-1+b1), libwibble-dev (<= 1.1-1), libwreport2 (<= 2.14-1), libxmltooling6 (<= 1.5.3-2.1), lightspark (<= 0.7.2+git20150512-2+b1), mira-assembler (<= 4.9.5-1), mongodb (<= 1:2.4.14-2), mongodb-server (<= 1:2.4.14-2), ncbi-blast+ (<= 2.2.30-4), openscad (<= 2014.03+dfsg-1+b1), passepartout (<= 0.7.1-1.1), pdf2djvu (<= 0.7.21-2), photoprint (<= 0.4.2~pre2-2.3+b2), plastimatch (<= 1.6.2+dfsg-1), plee-the-bear (<= 0.6.0-3.1), povray (<= 1:3.7.0.0-8), powertop (<= 2.6.1-1), printer-driver-brlaser (<= 3-3), psi4 (<= 4.0~beta5+dfsg-2+b1), python-fiona (<= 1.5.1-2), python-guiqwt (<= 2.3.1-1), python-healpy (<= 1.8.1-1+b1), python-htseq (<= 0.5.4p3-2), python-imposm (<= 2.5.0-3+b2), python-pysph (<= 0~20150606.gitfa26de9-5), python-rasterio (<= 0.24.0-1), python-scipy (<= 0.14.1-1), python-sfml (<= 2.2~git20150611.196c88+dfsg-1+b1), python3-fiona (<= 1.5.1-2), python3-scipy (<= 0.14.1-1), python3-sfml (<= 2.2~git20150611.196c88+dfsg-1+b1), python3-taglib (<= 0.3.6+dfsg-2+b2), realtimebattle (<= 1.0.8-14), ruby-passenger (<= 5.0.7-1), schroot (<= 1.6.10-1+b1), sqlitebrowser (<= 3.5.1-3), tecnoballz (<= 0.93.1-6), wesnoth-1.12-core (<= 1:1.12.4-1), widelands (<= 1:18-3+b1), xflr5 (<= 6.09.06-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
This package contains an additional runtime library for C++ programs
built with the GNU compiler.
.
libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
was included up to g++-2.95. The first version of libstdc++-v3 appeared
in g++-3.0.
Homepage: http://gcc.gnu.org/
Package: libkrb5-3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1026
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.15-1+deb9u3
Depends: libc6 (>= 2.16), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.15~beta1), libkeyutils1 (>= 1.5.9), libkrb5support0 (= 1.15-1+deb9u3)
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3)
Description: MIT Kerberos runtime libraries
Kerberos is a system for authenticating users and services on a network.
Kerberos is a trusted third-party service. That means that there is a
third party (the Kerberos server) that is trusted by all the entities on
the network (users and services, usually called "principals").
.
This is the MIT reference implementation of Kerberos V5.
.
This package contains the runtime library for the main Kerberos v5 API
used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Package: php-symfony-filesystem
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 88
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Source: symfony
Version: 2.8.7+dfsg-1.3+deb9u3
Depends: php-common
Description: basic filesystem utilities
The Symfony Filesystem Component provides basic utilities to work
with the filesystem, like creating directories, removing files or
adding symlinks.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com/doc/2.8/components/filesystem.html
Package: binutils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 23353
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Version: 2.28-5
Replaces: binutils-gold (<< 2.20.51.20100415), binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3)
Provides: binutils-gold, elf-binutils
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.2.0)
Suggests: binutils-doc (>= 2.28-5)
Breaks: binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3), hardening-wrapper (<< 2.8+nmu3)
Conflicts: binutils-gold (<< 2.20.51.20100415), binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3), binutils-multiarch (<< 2.27-8), elf-binutils, gas, modutils (<< 2.4.19-1)
Description: GNU assembler, linker and binary utilities
The programs in this package are used to assemble, link and manipulate
binary and object files. They may be used in conjunction with a compiler
and various libraries to build programs.
Homepage: https://www.gnu.org/software/binutils/
Package: libffi6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libffi
Version: 3.2.1-6
Depends: libc6 (>= 2.14)
Description: Foreign Function Interface library runtime
A foreign function interface is the popular name for the interface that
allows code written in one language to call code written in another
language.
Package: libaudit-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:2.6.7-2
Replaces: libaudit0, libaudit1 (<< 1:2.2.1-2)
Breaks: libaudit0, libaudit1 (<< 1:2.2.1-2)
Conffiles:
/etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
The audit-libs package contains the dynamic libraries needed for
applications to use the audit framework. It is used to monitor systems for
security related events.
.
This package contains the libaudit.conf configuration file and the associated
manpage.
Homepage: https://people.redhat.com/sgrubb/audit/
Package: cpp-6
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 22665
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Source: gcc-6
Version: 6.3.0-18+deb9u1
Replaces: gccgo-6 (<< 6.3.0-18+deb9u1)
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.14), libgmp10 (>= 2:5.0.1~), libisl15 (>= 0.15), libmpc3, libmpfr4 (>= 3.1.3), zlib1g (>= 1:1.1.4)
Suggests: gcc-6-locales (>= 6.3.0-1)
Breaks: hardening-wrapper (<< 2.8+nmu3), libmagics++-dev (<< 2.28.0-4)
Description: GNU C preprocessor
A macro processor that is used automatically by the GNU C compiler
to transform programs before actual compilation.
.
This package has been separated from gcc for the benefit of those who
require the preprocessor but not the compiler.
Homepage: http://gcc.gnu.org/
Package: libtext-charwidth-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 40
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Source: libtext-charwidth-perl (0.04-7)
Version: 0.04-7+b5
Depends: libc6 (>= 2.2.5), perl-base (>= 5.24.1~rc3-2), perlapi-5.24.1
Description: get display widths of characters on the terminal
This module permits perl software to get the display widths of characters
and strings on the terminal, using wcwidth() and wcswidth() from libc.
.
It provides mbwidth(), mbswidth(), and mblen().
Homepage: http://search.cpan.org/search?module=Text::CharWidth
Package: libc-dev-bin
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 378
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.24-11+deb9u4
Depends: libc6 (>> 2.24), libc6 (<< 2.25)
Recommends: manpages, manpages-dev
Description: GNU C Library: Development binaries
This package contains utility programs related to the GNU C Library
development package.
Homepage: http://www.gnu.org/software/libc/libc.html
Package: liblua5.2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 425
Maintainer: Enrico Tassi <gareuselesinge@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lua5.2 (5.2.4-1.1)
Version: 5.2.4-1.1+b2
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 4.1.1)
Description: Shared library for the Lua interpreter version 5.2
Lua is a powerful, light-weight programming language designed for extending
applications. The language engine is accessible as a library, having a C
API which allows the application to exchange data with Lua programs and also
to extend Lua with C functions. Lua is also used as a general-purpose,
stand-alone language through the simple command line interpreter provided.
.
This package contains runtime libraries. You shouldn't need to install it
explicitly.
Homepage: http://www.lua.org
Package: screen
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 982
Maintainer: Axel Beckert <abe@debian.org>
Architecture: amd64
Version: 4.5.0-6+deb9u1
Depends: libc6 (>= 2.15), libpam0g (>= 0.99.7.1), libtinfo5 (>= 6)
Suggests: byobu | screenie | iselect (>= 1.4.0-1), ncurses-term
Conffiles:
/etc/init.d/screen-cleanup 44ec7824f5ef10df73e92ad064331ea0
/etc/screenrc 12c245238eb8b653625bba27dc81df6a
Description: terminal multiplexer with VT100/ANSI terminal emulation
GNU Screen is a terminal multiplexer that runs several separate "screens" on
a single physical character-based terminal. Each virtual terminal emulates a
DEC VT100 plus several ANSI X3.64 and ISO 2022 functions. Screen sessions
can be detached and resumed later on a different terminal.
.
Screen also supports a whole slew of other features, including configurable
input and output translation, serial port support, configurable logging,
and multi-user support.
Homepage: https://savannah.gnu.org/projects/screen
Package: daemon
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 275
Maintainer: Marc Haber <mh+debian-packages@zugschlus.de>
Architecture: amd64
Source: daemon (0.6.4-1)
Version: 0.6.4-1+b2
Depends: libc6 (>= 2.14)
Conffiles:
/etc/daemon.conf a411f4372ce3a162c37e667c5dfd0fda
Description: turns other processes into daemons
There are many tasks that need to be performed to correctly set up a
daemon process. This can be tedious. Daemon performs these tasks for
other processes. This is useful for writing daemons in languages other
than C, C++ or Perl (e.g. /bin/sh, Java).
.
If you want to write daemons in languages that can link against C functions
(e.g. C, C++), see libslack which contains the core functionality of daemon.
.
Upstream URL: http://www.libslack.org/daemon/
Homepage: http://www.libslack.org/daemon/
Package: libnet-ldap-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 893
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1:0.6500+dfsg-1
Depends: perl, libconvert-asn1-perl
Recommends: libgssapi-perl, libwww-perl
Suggests: libauthen-sasl-perl, libdigest-hmac-perl, libio-socket-ssl-perl, libjson-perl, libtext-soundex-perl | perl (<< 5.19.0), liburi-perl, libxml-parser-perl, libxml-sax-perl, perl (>= 5.19.8) | libio-socket-ip-perl | libio-socket-inet6-perl
Description: client interface to LDAP servers
Net::LDAP is a collection of Perl modules that implement an interface to
various LDAP services. The module is capable of searching directories or
performing maintenance functions such as adding, deleting or modifying
entries.
Homepage: http://ldap.perl.org/
Package: libcomerr2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 84
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.43.4-2+deb9u2
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.17)
Description: common error description library
libcomerr is an attempt to present a common error-handling mechanism to
manipulate the most common form of error code in a fashion that does not
have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net
Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1854
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.6.0+git+20161106-2
Pre-Depends: libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: mlocate | locate
Breaks: binstats (<< 1.08-8.1), debhelper (<< 9.20130504), guilt (<< 0.36-0.2), kernel-package (<< 13.000), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), sendmail (<< 8.14.4-5), switchconf (<< 0.0.9-2.1)
Conflicts: debconf (<< 1.5.50)
Description: utilities for finding files--find, xargs
GNU findutils provides utilities to find files meeting specified
criteria and perform various actions on the files which are found.
This package contains 'find' and 'xargs'; however, 'locate' has
been split off into a separate package.
Homepage: http://savannah.gnu.org/projects/findutils/
Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 229
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.6
Replaces: libpam0g-util
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
Contains the shared library for Linux-PAM, a library that enables the
local system administrator to choose how applications authenticate users.
In other words, without rewriting or recompiling a PAM-aware application,
it is possible to switch between the authentication mechanism(s) it uses.
One may entirely upgrade the local authentication system without touching
the applications themselves.
Homepage: http://www.linux-pam.org/
Package: bison
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 2061
Maintainer: Chuan-kai Lin <cklin@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: bison (2:3.0.4.dfsg-1)
Version: 2:3.0.4.dfsg-1+b1
Depends: m4, libc6 (>= 2.15), libbison-dev (= 2:3.0.4.dfsg-1+b1)
Suggests: bison-doc
Description: YACC-compatible parser generator
Bison is a general-purpose parser generator that converts a
grammar description for an LALR(1) context-free grammar into a C
program to parse that grammar. Once you are proficient with Bison, you
may use it to develop a wide range of language parsers, from those used
in simple desk calculators to complex programming languages.
.
Bison is upward compatible with Yacc: all properly-written Yacc
grammars ought to work with Bison with no change. Anyone familiar with
Yacc should be able to use Bison with little trouble. Documentation of
the program is in the bison-doc package.
Homepage: http://www.gnu.org/software/bison/
Package: libxdmcp6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 53
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxdmcp
Version: 1:1.1.2-3
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.4)
Description: X11 Display Manager Control Protocol library
This package provides the main interface to the X11 display manager control
protocol library, which allows for remote logins to display managers.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXdmcp
Package: libbind9-140
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 254
Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u12
Replaces: libbind0
Depends: libc6 (>= 2.4), libcap2 (>= 1:2.10), libcomerr2 (>= 1.01), libdns162, libgeoip1, libgssapi-krb5-2 (>= 1.6.dfsg.2), libisc160, libisccfg140, libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libssl1.0.2 (>= 1.0.2d), libxml2 (>= 2.6.27)
Conflicts: libbind0, libbind9-41
Description: BIND9 Shared Library used by BIND
The Berkeley Internet Name Domain (BIND) implements an Internet domain
name server. BIND is the most widely-used name server software on the
Internet, and is supported by the Internet Software Consortium, www.isc.org.
.
This package delivers the libbind9 shared library used by BIND's daemons and
clients.
Package: manpages-es
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 5680
Maintainer: Javier Fernández-Sanguino Peña <jfs@debian.org>
Architecture: all
Version: 1.55-10
Depends: debconf (>= 0.5) | debconf-2.0
Suggests: man-browser
Conflicts: manpages-es-extra (<= 0.8a-12)
Description: Spanish man pages
This package contains the Linux man pages for all chapters
translated into Spanish. Not all the manual pages are updated, however.
Homepage: http://ditec.um.es/~piernas/manpages-es/
Package: libcap-ng0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 43
Maintainer: Pierre Chifflier <pollux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcap-ng (0.7.7-3)
Version: 0.7.7-3+b1
Depends: libc6 (>= 2.8)
Description: An alternate POSIX capabilities library
This library implements the user-space interfaces to the POSIX
1003.1e capabilities available in Linux kernels. These capabilities are
a partitioning of the all powerful root privilege into a set of distinct
privileges.
.
The libcap-ng library is intended to make programming with POSIX
capabilities much easier than the traditional libcap library.
.
This package contains header files and libraries for libcap-ng.
Homepage: http://people.redhat.com/sgrubb/libcap-ng
Package: mariadb-server
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 62
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: all
Source: mariadb-10.1
Version: 10.1.26-0+deb9u1
Depends: mariadb-server-10.1 (>= 10.1.26-0+deb9u1)
Description: MariaDB database server (metapackage depending on the latest version)
This is an empty package that depends on the current "best" version of
mariadb-server (currently mariadb-server-10.0), as determined by the MariaDB
maintainers. Install this package if in doubt about which MariaDB
version you need. That will install the version recommended by the
package maintainers.
.
MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
server. SQL (Structured Query Language) is the most popular database query
language in the world. The main goals of MariaDB are speed, robustness and
ease of use.
Homepage: https://mariadb.org/
Package: dbus
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 534
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.10.32-0+deb9u1
Depends: adduser, init-system-helpers (>= 1.3~), lsb-base (>= 3.2-14), libapparmor1 (>= 2.8.95), libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libcap-ng0, libdbus-1-3 (= 1.10.32-0+deb9u1), libexpat1 (>= 2.1~beta3), libselinux1 (>= 2.0.65), libsystemd0 (>= 209)
Suggests: default-dbus-session-bus | dbus-session-bus
Conffiles:
/etc/default/dbus 0d0f25a2f993509c857eb262f6e22015
/etc/init.d/dbus ec9a7d183ec50837a12aca3f9c95cc27
Description: simple interprocess messaging system (daemon and utilities)
D-Bus is a message bus, used for sending messages between applications.
Conceptually, it fits somewhere in between raw sockets and CORBA in
terms of complexity.
.
D-Bus supports broadcast messages, asynchronous messages (thus
decreasing latency), authentication, and more. It is designed to be
low-overhead; messages are sent using a binary protocol, not using
XML. D-Bus also supports a method call mapping for its messages, but
it is not required; this makes using the system quite simple.
.
It comes with several bindings, including GLib, Python, Qt and Java.
.
This package contains the D-Bus daemon and related utilities.
.
The client-side library can be found in the libdbus-1-3 package, as it is no
longer contained in this package.
Homepage: http://dbus.freedesktop.org/
Package: libmount1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 403
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libselinux1 (>= 2.6-3~)
Description: device mounting library
This device mounting library is used by mount and umount helpers.
Package: python3-configobj
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 161
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: configobj
Version: 5.0.6-2
Depends: python3-six, python3:any (>= 3.3.2-2~)
Suggests: python-configobj-doc
Description: simple but powerful config file reader and writer for Python 3
ConfigObj is a simple but powerful config file reader and writer: an
ini file round tripper. Its main feature is that it is very easy to
use, with a straightforward programmer's interface and a simple
syntax for config files. It has lots of other features, though:
.
* Nested sections (subsections), to any level
* List values
* Multiple line values
* String interpolation (substitution)
* Integrated with a powerful validation system
+ including automatic type checking/conversion
+ and allowing default values
+ repeated sections
* All comments in the file are preserved
* The order of keys/sections is preserved
* Full Unicode support
* Powerful unrepr mode for storing/retrieving Python data-types
.
This is the Python 3 version of the package.
Homepage: http://www.voidspace.org.uk/python/configobj.html
Package: php7.0-common
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 4611
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-calendar, php-ctype, php-exif, php-fileinfo, php-ftp, php-iconv, php-pdo, php-phar, php-posix, php-shmop, php-sockets, php-sysvmsg, php-sysvsem, php-sysvshm, php-tokenizer, php7.0-calendar, php7.0-ctype, php7.0-exif, php7.0-fileinfo, php7.0-ftp, php7.0-gettext, php7.0-iconv, php7.0-pdo, php7.0-phar, php7.0-posix, php7.0-shmop, php7.0-sockets, php7.0-sysvmsg, php7.0-sysvsem, php7.0-sysvshm, php7.0-tokenizer
Depends: php-common (>= 1:35), ucf, libc6 (>= 2.15), libssl1.1 (>= 1.1.0)
Breaks: gforge-common (<< 6)
Description: documentation, examples and common module for PHP
This package provides the documentation, examples and common module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: wamerican
Status: install ok installed
Priority: standard
Section: text
Installed-Size: 990
Maintainer: Don Armstrong <don@debian.org>
Architecture: all
Source: scowl
Version: 7.1-1
Provides: wordlist
Depends: debconf (>= 0.5) | debconf-2.0
Description: American English dictionary words for /usr/share/dict
This package provides the file /usr/share/dict/american-english
containing a list of English words with American spellings.
This list can be used by spelling checkers, and by programs such
as look(1).
.
There are also -small, -large, and -huge versions of this word list,
and there are wbritish* and wcanadian* packages as well.
Homepage: http://wordlist.sourceforge.net/
Package: libkeyutils1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 36
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: same
Source: keyutils
Version: 1.5.9-9
Depends: libc6 (>= 2.14)
Description: Linux Key Management Utilities (library)
Keyutils is a set of utilities for managing the key retention facility in the
kernel, which can be used by filesystems, block devices and more to gain and
retain the authorization and encryption keys required to perform secure
operations.
.
This package provides a wrapper library for the key management facility system
calls.
Homepage: http://people.redhat.com/~dhowells/keyutils/
Package: libdbix-contextualfetch-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 64
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.03-3
Depends: perl (>= 5.6.0-16), libdbi-perl (>= 1.35)
Description: module to add context aware fetches to DBI
The Perl database independent interface - DBI - does not take much
advantage of Perl's context sensitivity. This is the situation where
a Perl subroutine knows whether the caller wants a single scalar
value or a list of them to be returned.
.
DBIx::ContextualFetch is a sub-class of DBI which redefines some of
the various fetch methods to fix this oversight. It also adds a few
new methods for convenience (though not necessarily efficiency). Much
of this code was originally part of the IMA::DBI Perl module
(libima-dbi-perl package).
Homepage: http://search.cpan.org/dist/DBIx-ContextualFetch/
Package: php-symfony-polyfill-mbstring
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 81
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Source: php-symfony-polyfill
Version: 1.2.0-1
Depends: php-common
Suggests: php-mbstring
Description: Symfony polyfill for the Mbstring extension
This component provides a partial, native PHP implementation for the
Mbstring extension.
.
The Symfony Polyfill project backports features found in the latest PHP
versions and provides compatibility layers for some extensions and functions.
It is intended to be used when portability across PHP versions and extensions
is desired.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com
Package: libconvert-asn1-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 121
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.27-2
Depends: perl, perl (>= 5.15.3) | libmath-bigint-perl
Description: Perl module for encoding and decoding ASN.1 data structures
Convert::ASN1 will parse ASN.1 descriptions and will encode from and decode to
perl data structures using a hierarchy of references.
.
Note that the ASN.1 parser is not a complete implementation of the
ASN.1 specification.
Homepage: https://metacpan.org/release/Convert-ASN1
Package: libreadline5
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 339
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Multi-Arch: same
Source: readline5 (5.2+dfsg-3)
Version: 5.2+dfsg-3+b1
Depends: readline-common, libc6 (>= 2.15), libtinfo5 (>= 6)
Description: GNU readline and history libraries, run-time libraries
The GNU readline library aids in the consistency of user interface
across discrete programs that need to provide a command line
interface.
.
The GNU history library provides a consistent user interface for
recalling lines of previously typed input.
Package: libnewt0.52
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 372
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: same
Source: newt (0.52.19-1)
Version: 0.52.19-1+b1
Depends: libc6 (>= 2.15), libslang2 (>= 2.2.4)
Recommends: libfribidi0
Conffiles:
/etc/newt/palette.original d41d8cd98f00b204e9800998ecf8427e
Description: Not Erik's Windowing Toolkit - text mode windowing with slang
Newt is a windowing toolkit for text mode built from the slang library.
It allows color text mode applications to easily use stackable windows,
push buttons, check boxes, radio buttons, lists, entry fields, labels,
and displayable text. Scrollbars are supported, and forms may be nested
to provide extra functionality. This package contains the shared library
for programs that have been built with newt.
Homepage: https://fedorahosted.org/newt/
Package: bsdmainutils
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 566
Maintainer: Debian Bsdmainutils Team <pkg-bsdmainutils@teams.debian.net>
Architecture: amd64
Multi-Arch: foreign
Version: 9.0.12+nmu1
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.14), libncurses5 (>= 6), libtinfo5 (>= 6), bsdutils (>= 3.0-0), debianutils (>= 1.8)
Suggests: cpp, wamerican | wordlist, whois, vacation
Breaks: bsdutils (<< 1:2.13-11)
Conffiles:
/etc/calendar/default f499e79b0d2d685aa5ae7e1013940b96
/etc/cron.daily/bsdmainutils 559387f792462a62e3efb1d573e38d11
/etc/default/bsdmainutils bded239f4fea461cc5c92c3bd5a28cc9
Description: collection of more utilities from FreeBSD
This package contains lots of small programs many people expect to find when
they use a BSD-style Unix system.
.
It provides banner (as printerbanner), calendar, col, colcrt, colrm, column,
from (as bsd-from), hexdump (or hd), look, lorder, ncal (or cal), ul, and
write (as bsd-write).
.
This package used to contain whois and vacation, which are now distributed in
their own packages. Also here was tsort, which is now in the "coreutils"
package.
Package: python3-setuptools
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 922
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-setuptools
Version: 33.1.1-1
Depends: python3-pkg-resources (= 33.1.1-1), python3:any (>= 3.3.2-2~)
Suggests: python-setuptools-doc
Description: Python3 Distutils Enhancements
Extensions to the python-distutils for large or complex distributions.
Homepage: https://pypi.python.org/pypi/setuptools
Package: console-setup-linux
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1218
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: console-setup
Version: 1.164
Replaces: console-setup (<< 1.71), console-terminus
Provides: console-terminus
Depends: kbd (>= 0.99-12) | console-tools (>= 1:0.2.3-16), keyboard-configuration (= 1.164), init-system-helpers (>= 1.18~), init-system-helpers (>= 1.29~) | initscripts
Suggests: console-setup
Breaks: console-cyrillic (<= 0.9-11), console-setup (<< 1.71), console-terminus
Conflicts: console-setup-freebsd
Conffiles:
/etc/console-setup/compose.ARMSCII-8.inc fef36b61fb8b1cacc151ad3db127f777
/etc/console-setup/compose.CP1251.inc fef88d8c8dd4c726498003fd3cd84a7f
/etc/console-setup/compose.CP1255.inc c972a2e90938657e97b643366b98b2ed
/etc/console-setup/compose.CP1256.inc 5ea5e4d41da7a88f742863810e86144b
/etc/console-setup/compose.GEORGIAN-ACADEMY.inc b6d80f40abff7e8af236796ebaca0247
/etc/console-setup/compose.GEORGIAN-PS.inc cf45272b6bf35a22223b132600dc36c3
/etc/console-setup/compose.IBM1133.inc a31102602f7e7cab9738022b6c5469ae
/etc/console-setup/compose.ISIRI-3342.inc 5ada7fbba750192f11fa238add232ba9
/etc/console-setup/compose.ISO-8859-1.inc 28f20a64f3f0b175cfaec4bce07465c2
/etc/console-setup/compose.ISO-8859-10.inc e5fce59617c839b56574c9e323d34686
/etc/console-setup/compose.ISO-8859-11.inc ad2f3cc7ee64602a790bad8a2a989243
/etc/console-setup/compose.ISO-8859-13.inc 5e9ad266f17ff2a0281a870079bc8284
/etc/console-setup/compose.ISO-8859-14.inc 360a44f83e8f8c9d463c9400dcc60de4
/etc/console-setup/compose.ISO-8859-15.inc 695ec832355223fb036629e4e6a9a963
/etc/console-setup/compose.ISO-8859-16.inc 8245c19b5262d8d23ca856587739eb20
/etc/console-setup/compose.ISO-8859-2.inc c93ffa7f80e22c04c94e89a0cd742458
/etc/console-setup/compose.ISO-8859-3.inc 67b8fafc842a4dc9b3bc0c06af394834
/etc/console-setup/compose.ISO-8859-4.inc aba127ff3df5159c3070617a7efac46c
/etc/console-setup/compose.ISO-8859-5.inc f861a4b0403490677e6d400f2d7129da
/etc/console-setup/compose.ISO-8859-6.inc 41ea36ea1c1a1c0c9bebdf0016395e1f
/etc/console-setup/compose.ISO-8859-7.inc 8f48a9f7c9f69ca828edbd7b276fe406
/etc/console-setup/compose.ISO-8859-8.inc 9cceaa9f3312f89aba371d3c893f4e7b
/etc/console-setup/compose.ISO-8859-9.inc 05aae7589b5062a53f346f721cb0f7d3
/etc/console-setup/compose.KOI8-R.inc 8cfd7766b86e5e55d6e71d0d95519c92
/etc/console-setup/compose.KOI8-U.inc 217ee62f6982736276f41f760f8622f8
/etc/console-setup/compose.TIS-620.inc 31b73af83ef3993c128e2b983b9eaf89
/etc/console-setup/compose.VISCII.inc e4ffc74868adf4cc39ba61dd99581899
/etc/console-setup/remap.inc b72cfe32ffa93987f74c5cec9ac180fd
/etc/init.d/console-setup.sh 510488b5120b580b673a15b75a5498b0
/etc/init.d/keyboard-setup.sh b868200c6e36ef87e27ead9a3ddad2db
Description: Linux specific part of console-setup
This package includes fonts in psf format and definitions of various
8-bit charmaps.
Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2747
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Source: shadow
Version: 1:4.4-4.1+deb9u1
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules (>= 1.1.8-1)
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
/etc/login.defs c92ea31d5ac50ae3e5d33d24f1e70983
/etc/pam.d/login 1fd6cb4d4267a68148ee9973510a9d3e
/etc/pam.d/su ce6dcfda3b190a27a455bb38a45ff34a
/etc/securetty d0124b1d2fb22d4ac9a91aa02ae6d6db
Description: system login tools
These tools are required to be able to login and use your system. The
login program invokes your user shell and enables command execution. The
newgrp program is used to change your effective group ID (useful for
workgroup type situations). The su program allows changing your effective
user ID (useful being able to execute commands as another user).
Homepage: https://github.com/shadow-maint/shadow
Package: ispell
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 356
Maintainer: Robert Luberda <robert@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.4.00-5
Depends: libc6 (>= 2.14), libtinfo5 (>= 6)
Recommends: iamerican | ispell-dictionary, wamerican | wordlist
Suggests: spell
Breaks: iamerican (<= 3.1.20.0-9), ibritish (<= 3.1.20.0-9), ibulgarian (<= 3.0-12), iczech (<= 20040229-5), idanish (<= 1.6.25-1), iestonian (<= 1:20030606-12.1), ifinnish (<= 0.7-17.3), ifinnish-large (<= 0.7-17.3), ifrench (<= 1.4-25), ifrench-gut (<= 1:1.0-27), igaelic (<= 0.50-7), ihungarian (<= 0.99.4-2), iirish (<= 2.0-20), iitalian (<= 1:2.3-2), imanx (<= 0.50-8), inorwegian (<= 2.0.10-3.2), iogerman (<= 1:2-26), ipolish (<= 20100612-1), irussian (<= 0.99g5-8.1), iswedish (<= 1.4.5-2), iukrainian (<= 1.6.0-1)
Description: International Ispell (an interactive spelling corrector)
Ispell corrects spelling in plain text, LaTeX, sgml/html/xml, and nroff files.
[x]Emacs and jed have nice interfaces to ispell, and ispell works from many
other tools and from the command line as well.
.
No ispell dictionaries are included in this package; you must install
at least one of them ("iamerican" is recommended by default for no good
reason); install the "ispell-dictionary" package(s) for the language(s)
you and your users will want to spell-check.
.
It's a good idea to install "word list" package(s) for the same language(s),
because they'll be used by ispell's (L)ookup command.
Homepage: http://www.lasr.cs.ucla.edu/geoff/ispell.html
Package: gnupg-agent
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1362
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.1.18-8~deb9u4
Provides: gpg-agent
Depends: pinentry-curses | pinentry, libassuan0 (>= 2.3.0), libc6 (>= 2.15), libgcrypt20 (>= 1.7.0), libgpg-error0 (>= 1.25), libnpth0 (>= 0.90), libreadline7 (>= 6.0)
Recommends: gnupg (= 2.1.18-8~deb9u4) | gpgsm
Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, scdaemon
Conffiles:
/etc/X11/Xsession.d/90gpg-agent fbb9ce5e8e4ba5727090f0aa51b61a82
Description: GNU privacy guard - cryptographic agent
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC4880.
.
This package contains the agent program gpg-agent which handles all
secret key material for OpenPGP and S/MIME use. The agent also
provides a passphrase cache, which is used by pre-2.1 versions of
GnuPG for OpenPGP operations.
Homepage: https://www.gnupg.org/
Package: libconvert-binhex-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 75
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.125-1
Depends: perl
Description: Perl5 module for extracting data from macintosh BinHex files
Convert::BinHex is a format used by Macintosh for transporting Mac files safely
through electronic mail, as short-lined, 7-bit, semi-compressed data
streams. This module provides a means of converting those data streams
back into binary data.
Homepage: https://metacpan.org/release/Convert-BinHex
Package: php7.0-xml
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 472
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Replaces: php7.0-xsl (<< 7.0.3-6~)
Provides: php-dom, php-simplexml, php-wddx, php-xml, php-xmlreader, php-xmlwriter, php-xsl, php7.0-dom, php7.0-simplexml, php7.0-wddx, php7.0-xmlreader, php7.0-xmlwriter, php7.0-xsl
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc6 (>= 2.14), libxml2 (>= 2.9.0), libxslt1.1 (>= 1.1.25)
Breaks: php7.0-xsl (<< 7.0.3-6~)
Description: DOM, SimpleXML, WDDX, XML, and XSL module for PHP
This package provides the DOM, SimpleXML, WDDX, XML, and XSL module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libevent-2.0-5
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 341
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libevent
Version: 2.0.21-stable-3
Depends: libc6 (>= 2.17)
Description: Asynchronous event notification library
Libevent is an asynchronous event notification library that provides a
mechanism to execute a callback function when a specific event occurs
on a file descriptor or after a timeout has been reached.
.
It is meant to replace the asynchronous event loop found in
event driven network servers. Currently, libevent supports /dev/poll,
kqueue(2), event ports, select(2), poll(2) and epoll(4).
.
For backward compatibility and to transition to "libevent_core only"
or "libevent_core + libevent_extra", the libevent source package builds
the libevent library that includes everything in libevent_core and
libevent_extra.
Homepage: http://libevent.org/
Package: liblinear3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 92
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: same
Source: liblinear
Version: 2.1.0+dfsg-2
Depends: libblas3 | libblas.so.3, libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 4.1.1)
Suggests: liblinear-tools (= 2.1.0+dfsg-2), liblinear-dev (= 2.1.0+dfsg-2)
Description: Library for Large Linear Classification
LIBLINEAR is a library for learning linear classifiers for large scale
applications. It supports Support Vector Machines (SVM) with L2 and L1
loss, logistic regression, multi class classification and also Linear
Programming Machines (L1-regularized SVMs). Its computational complexity
scales linearly with the number of training examples making it one of
the fastest SVM solvers around. It also provides Python bindings.
.
This package contains the shared libraries.
Homepage: http://www.csie.ntu.edu.tw/~cjlin/liblinear/
Package: postfix-sqlite
Status: install ok installed
Priority: extra
Section: mail
Installed-Size: 361
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: amd64
Source: postfix
Version: 3.1.15-0+deb9u1
Replaces: postfix (<< 3.1.3-7~)
Depends: libc6 (>= 2.2.5), libsqlite3-0 (>= 3.5.9)
Recommends: postfix (= 3.1.15-0+deb9u1)
Conffiles:
/etc/postfix/postfix-files.d/sqlite.files 0f49c8f3367043bf170db6dbc2f555b5
Description: SQLite map support for Postfix
Postfix is Wietse Venema's mail transport agent that started life as an
alternative to the widely-used Sendmail program. Postfix attempts to
be fast, easy to administer, and secure, while at the same time being
sendmail compatible enough to not upset existing users. Thus, the outside
has a sendmail-ish flavor, but the inside is completely different.
.
This provides support for SQLite maps in Postfix. If you plan to use
SQLite maps with Postfix, you need this.
Homepage: http://www.postfix.org
Package: libnl-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 176
Maintainer: Heiko Stuebner <mmind@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnl3
Version: 3.2.27-2
Depends: libc6 (>= 2.14)
Conffiles:
/etc/libnl-3/classid 3e07259e58674631830b152e983ca995
/etc/libnl-3/pktloc 7613dbc41b2dc3258195b6b6abd0f179
Description: library for dealing with netlink sockets
This is a library for applications dealing with netlink sockets.
The library provides an interface for raw netlink messaging and various
netlink family specific interfaces.
Homepage: http://www.infradead.org/~tgr/libnl/
Package: libpython2.7-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 2767
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python2.7
Version: 2.7.13-2+deb9u6
Replaces: libpython2.7-stdlib (<< 2.7.8-7), python2.7 (<< 2.7.4-2), python2.7-minimal (<< 2.7.3-10)
Recommends: libpython2.7-stdlib
Breaks: python2.7-minimal (<< 2.7.4~rc1-1~)
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
/etc/python2.7/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 2.7)
This package contains some essential modules. It is normally not
used on it's own, but as a dependency of python2.7-minimal.
Package: libpci3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 102
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pciutils
Version: 1:3.5.2-1
Replaces: libpci2
Provides: libpci2
Depends: libc6 (>= 2.14), libudev1 (>= 196), zlib1g (>= 1:1.1.4)
Conflicts: libpci2
Description: Linux PCI Utilities (shared library)
This package contains the libpci shared library files.
.
The libpci library provides portable access to configuration
registers of devices connected to the PCI bus.
Homepage: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml
Package: mariadb-server-10.1
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 76605
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb-10.1
Version: 10.1.26-0+deb9u1
Replaces: mariadb-galera-server, mariadb-galera-server-10.0, mariadb-galera-server-5.5, mariadb-server-10.0, mariadb-server-5.5, mariadb-tokudb-engine-10.0, mariadb-tokudb-engine-10.1, mariadb-tokudb-engine-5.5, mysql-client-5.5, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, virtual-mysql-server
Provides: virtual-mysql-server
Depends: galera-3 (>= 25.3), gawk, iproute2, libdbi-perl, lsb-base (>= 3.0-10), lsof, mariadb-client-10.1 (>= 10.1.26-0+deb9u1), mariadb-server-core-10.1 (>= 10.1.26-0+deb9u1), passwd, perl (>= 5.6), psmisc, rsync, socat, debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), libaio1 (>= 0.3.93), libc6 (>= 2.17), libpam0g (>= 0.99.7.1), libstdc++6 (>= 5.2), libsystemd0, zlib1g (>= 1:1.2.0)
Pre-Depends: adduser (>= 3.40), debconf, mariadb-common (>= 10.1.26-0+deb9u1)
Recommends: libhtml-template-perl
Suggests: mailx, mariadb-test, netcat-openbsd, tinyca
Breaks: cqrlog (<< 1.9.0-5~), mariadb-galera-server, mariadb-galera-server-10.0, mariadb-galera-server-5.5, mariadb-server-10.0, mariadb-server-5.5, mariadb-tokudb-engine-10.0, mariadb-tokudb-engine-10.1, mariadb-tokudb-engine-5.5, mysql-client-5.5, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7
Conflicts: mariadb-tokudb-engine-10.0, mariadb-tokudb-engine-10.1, mariadb-tokudb-engine-5.5, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, virtual-mysql-server
Conffiles:
/etc/apparmor.d/usr.sbin.mysqld 5b43a33a4995f3532bcea02d9c2c87c1
/etc/default/mysql 64e6d248978c07392628278d0be66888
/etc/init.d/mysql 50c82644a999f08a0861a85c92b7d525
/etc/insserv.conf.d/mariadb 2588bf6ebd0da2f146befac246610658
/etc/logcheck/ignore.d.paranoid/mariadb-server-10_1 6babe46e791059cdd5a26f4f7fec9eca
/etc/logcheck/ignore.d.server/mariadb-server-10_1 a5b52544898b1d96ce64f96ec913ee65
/etc/logcheck/ignore.d.workstation/mariadb-server-10_1 a9766f2dd21ba5e5474526b9df4a82a7
/etc/logrotate.d/mysql-server 3b27c6ac3dbfe31c1c1db0f880b3a2f4
/etc/mysql/debian-start 698c5abe65f83aec900a3f0e3500e758
/etc/mysql/mariadb.conf.d/50-mysqld_safe.cnf ace3390ea785e7bb3e87bee2ef0f9da8
/etc/mysql/mariadb.conf.d/50-server.cnf 073e32328fb38e45ea4d3a497bbda982
Description: MariaDB database server binaries
MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
server. SQL (Structured Query Language) is the most popular database query
language in the world. The main goals of MariaDB are speed, robustness and
ease of use.
.
This package includes the server binaries.
Homepage: https://mariadb.org/
Package: jsonlint
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 52
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Version: 1.5.0-1
Depends: php-cli, php-common
Description: validating parser of JSON data structures
JSON (JavaScript Object Notation) is a lightweight data-interchange
format. It is easy for humans to read and write. It is easy for
machines to parse and generate. It is based on a subset of the
JavaScript Programming Language. JSON is a text format that is
completely language independent but uses conventions that are familiar
to programmers of the C-family of languages. These properties make JSON
an ideal data-interchange language.
.
This package provides jsonlint-php, a validating parser of JSON files.
Another more complete JSON syntax validator and formatter tool is
provided by the python-demjson package.
Homepage: https://github.com/Seldaek/jsonlint
Package: libdbd-mysql-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 266
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 4.041-2
Depends: perl (>= 5.24.1-1), perl-dbdabi-94, perlapi-5.24.1, libc6 (>= 2.4), libmariadbclient18 (>= 10.0.14), zlib1g (>= 1:1.1.4), libdbi-perl
Description: Perl5 database interface to the MariaDB/MySQL database
DBD::mysql is the Perl5 Database Interface driver for the MariaDB/MySQL
database. In other words: DBD::mysql is an interface between the Perl
programming language and the MySQL programming API that comes with the
MariaDB/MySQL relational database management system. Most functions provided by
this programming API are supported. Some rarely used functions are
missing, mainly because no one ever requested them. However supported
features include: compression of data between server and client; timeouts;
SSL; prepared statement support; server administration such as creating
and dropping databases and restarting the server; auto-reconnection;
utf8; bind type guessing; bind comment placeholders; automated insert ids;
transactions; multiple result sets and multithreading.
Homepage: http://dbi.perl.org/
Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 940
Maintainer: net-tools Team <pkg-net-tools-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.60+git20161116.90da8a0-1
Replaces: ja-trans (<= 0.8-2), netbase (<< 4.00)
Depends: libc6 (>= 2.14), libselinux1 (>= 1.32)
Conflicts: ja-trans (<= 0.8-2)
Description: NET-3 networking toolkit
This package includes the important tools for controlling the network
subsystem of the Linux kernel. This includes arp, ifconfig, netstat,
rarp, nameif and route. Additionally, this package contains utilities
relating to particular network hardware types (plipconfig, slattach,
mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
.
In the upstream package 'hostname' and friends are included. Those are
not installed by this package, since there is a special "hostname*.deb".
Homepage: http://sourceforge.net/projects/net-tools/
Package: php7.0-intl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 511
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-intl
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libicu57 (>= 57.1-1~), libstdc++6 (>= 4.9)
Description: Internationalisation module for PHP
This package provides the Internationalisation module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: libruby2.3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 13593
Maintainer: Antonio Terceiro <terceiro@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ruby2.3
Version: 2.3.3-1+deb9u11
Depends: rake (>= 10.4.2), ruby-did-you-mean (>= 1.0), ruby-minitest (>= 5.4), ruby-net-telnet (>= 0.1.1), ruby-test-unit (>= 3.0.8~), libc6 (>= 2.17), libffi6 (>= 3.0.4), libgdbm3 (>= 1.8.3), libgmp10, libncurses5 (>= 6), libreadline7 (>= 6.0), libssl1.0.2 (>= 1.0.2d), libtinfo5 (>= 6), libyaml-0-2, zlib1g (>= 1:1.2.2)
Description: Libraries necessary to run Ruby 2.3
Ruby is the interpreted scripting language for quick and easy
object-oriented programming. It has many features to process text
files and to do system management tasks (as in perl). It is simple,
straight-forward, and extensible.
.
This package includes the 'libruby-2.3' library, necessary to run Ruby 2.3.
(API version 2.3.0)
Homepage: http://www.ruby-lang.org/
Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 849
Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.115
Depends: passwd, debconf (>= 0.5) | debconf-2.0
Suggests: liblocale-gettext-perl, perl
Conffiles:
/etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
This package includes the 'adduser' and 'deluser' commands for creating
and removing users.
.
- 'adduser' creates new users and groups and adds existing users to
existing groups;
- 'deluser' removes users and groups and removes users from a given
group.
.
Adding users with 'adduser' is much easier than adding them manually.
Adduser will choose appropriate UID and GID values, create a home
directory, copy skeletal user configuration, and automate setting
initial values for the user's password, real name and so on.
.
Deluser can back up and remove users' home directories
and mail spool or all the files they own on the system.
.
A custom script can be executed after each of the commands.
.
Development mailing list:
http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/
Package: ruby-minitest
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 139
Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 5.9.0-1
Suggests: ruby-test-unit
Description: Ruby test tools supporting TDD, BDD, mocking, and benchmarking
minitest provides a complete suite of testing facilities supporting
TDD, BDD, mocking, and benchmarking.
.
minitest/unit is a small and incredibly fast unit testing framework.
It provides a rich set of assertions to make your tests clean and
readable.
.
minitest/spec is a functionally complete spec engine. It hooks onto
minitest/unit and seamlessly bridges test assertions over to spec
expectations.
.
minitest/benchmark is an awesome way to assert the performance of your
algorithms in a repeatable manner. Now you can assert that your newb
co-worker doesn't replace your linear algorithm with an exponential
one!
.
minitest/mock by Steven Baker, is a beautifully tiny mock object
framework.
.
minitest/pride shows pride in testing and adds coloring to your test
output.
.
minitest/unit is meant to have a clean implementation for language
implementors that need a minimal set of methods to bootstrap a working
test suite. For example, there is no magic involved for test-case
discovery.
Homepage: https://github.com/seattlerb/minitest
Ruby-Versions: all
Package: manpages-de
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 1413
Maintainer: Dr. Tobias Quathamer <toddy@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.22-1
Suggests: man-browser, manpages
Description: German manpages
This package contains the Linux manual pages translated into German.
The following sections are included:
* 1 = User programs (e.g. ls, ln)
* 4 = Devices (e.g. hd, sd).
* 5 = File formats and protocols, syntaxes of several system
files (e.g. wtmp, /etc/passwd, nfs).
* 6 = Games etc.
* 7 = Conventions and standards, macro packages, etc.
(e.g. nroff, ascii).
* 8 = System administration commands.
.
The English package manpages contains additional manual pages
which have not been translated yet.
Homepage: https://manpages-de.alioth.debian.org/
Package: ruby
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 38
Maintainer: Antonio Terceiro <terceiro@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: ruby-defaults
Version: 1:2.3.3
Replaces: irb, rdoc, rubygems
Provides: irb, rdoc, rubygems
Depends: ruby2.3
Suggests: ri, ruby-dev
Breaks: apt-listbugs (<< 0.1.6), rbenv (<= 0.4.0-1), ruby-debian (<< 0.3.8+b3), ruby-switch (<= 0.1.0)
Conflicts: ruby-activesupport-2.3, ruby-activesupport-3.2
Description: Interpreter of object-oriented scripting language Ruby (default version)
Ruby is the interpreted scripting language for quick and easy
object-oriented programming. It has many features to process text
files and to do system management tasks (as in perl). It is simple,
straight-forward, and extensible.
.
This package is a dependency package, which depends on Debian's default Ruby
version (currently v2.3).
Homepage: http://www.ruby-lang.org/
Package: libberkeleydb-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 376
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Source: libberkeleydb-perl (0.55-1)
Version: 0.55-1+b2
Depends: libc6 (>= 2.14), libdb5.3, perl (>= 5.24.1~rc3-2), perlapi-5.24.1
Description: use Berkeley DB databases from Perl
Provides BerkeleyDB::Hash, BerkeleyDB::Btree etc. classes that allow
access to Berkeley DB databases as if they were normal Perl hash
tables.
.
Supports all the features of Berkeley DB such as sharing cache and
lock memory between processes, logging and transactions.
Package: python-ipaddress
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 101
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Version: 1.0.17-1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: Backport of Python 3 ipaddress module (Python 2)
This module is a backport of the stdlib "ipaddress" module from Python 3. The
"ipaddress" module is in turn based off of the "ipaddr" module available in
the "python-ipaddr" but there are some important API differences; make sure
you are using the right module.
.
This package contains the Python 2 module.
Homepage: https://github.com/phihag/ipaddress
Package: libsub-name-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 43
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 0.21-1
Depends: perl (>= 5.24.1~rc3-3), perlapi-5.24.1, libc6 (>= 2.4)
Description: module for assigning a new name to referenced sub
Sub::Name has only one function, which is also exported by default:
.
subname NAME, CODEREF
.
Assigns a new name to referenced sub. If package specification is
omitted in the name, then the current package is used. The return
value is the sub.
.
The name is only used for informative routines (caller, Carp, etc).
You won't be able to actually invoke the sub by the given name. To
allow that, you need to do glob-assignment yourself.
Homepage: https://metacpan.org/release/Sub-Name
Package: ca-certificates
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 401
Maintainer: Michael Shuler <michael@pbandjelly.org>
Architecture: all
Multi-Arch: foreign
Version: 20200601~deb9u2
Depends: openssl (>= 1.0.0), debconf (>= 0.5) | debconf-2.0
Breaks: ca-certificates-java (<< 20121112+nmu1)
Enhances: openssl
Description: Common CA certificates
Contains the certificate authorities shipped with Mozilla's browser to allow
SSL-based applications to check for the authenticity of SSL connections.
.
Please note that Debian can neither confirm nor deny whether the
certificate authorities whose certificates are included in this package
have in any way been audited for trustworthiness or RFC 3647 compliance.
Full responsibility to assess them belongs to the local system
administrator.
Package: liblua5.3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 471
Maintainer: Enrico Tassi <gareuselesinge@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lua5.3
Version: 5.3.3-1+deb9u1
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 4.1.1)
Description: Shared library for the Lua interpreter version 5.3
Lua is a powerful, light-weight programming language designed for extending
applications. The language engine is accessible as a library, having a C
API which allows the application to exchange data with Lua programs and also
to extend Lua with C functions. Lua is also used as a general-purpose,
stand-alone language through the simple command line interpreter provided.
.
This package contains runtime libraries. You shouldn't need to install it
explicitly.
Homepage: http://www.lua.org
Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 62
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: acl (2.2.52-3)
Version: 2.2.52-3+b1
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14)
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
This package contains the libacl.so dynamic library containing
the POSIX 1003.1e draft standard 17 functions for manipulating
access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/
Package: pure-ftpd-common
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 284
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Architecture: all
Source: pure-ftpd
Version: 1.0.43-3
Replaces: pure-ftpd (<< 1.0.0)
Depends: debconf (>= 0.5) | debconf-2.0, libpam-modules, perl
Recommends: pure-ftpd
Conflicts: suidmanager (<< 0.50)
Conffiles:
/etc/ftpallow 34476d18b35b0675891e35f08fde3195
/etc/logrotate.d/pure-ftpd-common 9825eb2fb2f21f4c5ced902ea5f0de32
/etc/pam.d/pure-ftpd 218f3025ae9d6bf9f2d68c1089f1c408
/etc/pure-ftpd/conf/AltLog 8e2b67e9c0e125e4c540ae12262aa452
/etc/pure-ftpd/conf/FSCharset 1ca15bf75755838f3db6aa559b6db2d3
/etc/pure-ftpd/conf/MinUID ad865d2f63b9feb2552c220385fbb7e3
/etc/pure-ftpd/conf/NoAnonymous eb4585ad9fe0426781ed7c49252f8225
/etc/pure-ftpd/conf/PAMAuthentication eb4585ad9fe0426781ed7c49252f8225
/etc/pure-ftpd/conf/PureDB 6db5965698527e1f140dfc73ed40d47c
/etc/pure-ftpd/conf/TLSCipherSuite d339ec7c5fe5332d889610bf0c6f0ced
/etc/pure-ftpd/conf/UnixAuthentication e4ac654ba9b61686c2dc854a1128a323
/etc/pure-ftpd/pureftpd-dir-aliases 4c0a2e0a1c5eb5d50d4396aef55027da
Description: Pure-FTPd FTP server (Common Files)
This package provides files shared between the three pure-ftpd binary
packages like startup scripts, documentation, and examples.
Homepage: http://www.pureftpd.org/
Package: openssh-client
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 4111
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:7.4p1-10+deb9u7
Replaces: ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: adduser (>= 3.10), dpkg (>= 1.7.0), passwd, libc6 (>= 2.17), libedit2 (>= 2.11-20080614), libgssapi-krb5-2 (>= 1.14+dfsg), libselinux1 (>= 1.32), libssl1.0.2 (>= 1.0.2d), zlib1g (>= 1:1.1.4)
Recommends: xauth
Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass
Conflicts: sftp
Conffiles:
/etc/ssh/moduli fe5be9e1b2ad5c55132a3521ecaadcdd
/etc/ssh/ssh_config d26206bb4490f72d051d2642c3bf03ee
Description: secure shell (SSH) client, for secure access to remote machines
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
Ssh (Secure Shell) is a program for logging into a remote machine
and for executing commands on a remote machine.
It provides secure encrypted communications between two untrusted
hosts over an insecure network. X11 connections and arbitrary TCP/IP
ports can also be forwarded over the secure channel.
It can be used to provide applications with a secure communication
channel.
.
This package provides the ssh, scp and sftp clients, the ssh-agent
and ssh-add programs to make public key authentication more convenient,
and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
.
In some countries it may be illegal to use any encryption at all
without a special permit.
.
ssh replaces the insecure rsh, rcp and rlogin programs, which are
obsolete for most purposes.
Homepage: http://www.openssh.com/
Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 536
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Pre-Depends: libc6 (>= 2.14), libtinfo5 (>= 6.0+20151017), libtinfo5 (<< 6.1~)
Description: terminal-related programs and man pages
The ncurses library routines are a terminal-independent method of
updating character screens with reasonable optimization.
.
This package contains the programs used for manipulating the terminfo
database and individual terminfo entries, as well as some programs for
resetting terminals and such.
Homepage: http://invisible-island.net/ncurses/
Package: hicolor-icon-theme
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 414
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.15-1
Description: default fallback theme for FreeDesktop.org icon themes
This is the default fallback theme used by implementations of the
Freedesktop.org Icon Theme specification.
Package: mailman
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 38272
Maintainer: Mailman for Debian <pkg-mailman-hackers@lists.alioth.debian.org>
Architecture: amd64
Version: 1:2.1.23-1+deb9u8
Depends: libc6 (>= 2.14), python:any (>= 2.6.6-7~), debconf (>= 0.5) | debconf-2.0, logrotate (>= 3.8.0), ucf, lsb-base, apache2 | httpd, cron | cron-daemon, python-dnspython
Pre-Depends: debconf | debconf-2.0
Recommends: default-mta | mail-transport-agent
Suggests: spamassassin, lynx, listadmin
Conffiles:
/etc/cron.d/mailman 52d6ae0d505899f9ea4bb416bcbcbaf5
/etc/init.d/mailman 0ac814ea3e2cf0952fa5fd3bfa2c9484
/etc/logrotate.d/mailman 3e74d5981b732c80bda238f4076e44aa
/etc/mailman/apache.conf b95d3687fc49957b896e2f27bb5ee165
Description: Powerful, web-based mailing list manager
The GNU Mailing List Manager, which manages email discussion lists
much like Majordomo and Smartmail. Unlike most similar products,
Mailman gives each mailing list a web page, and allows users to
subscribe, unsubscribe, etc. over the web. Even the list manager can
administer his or her list entirely from the web.
.
Mailman also integrates most things people want to do with mailing
lists, including archiving, mail <-> news gateways, and so on. It
has all of the features you expect from such a product, plus
integrated support for the web (including web based archiving),
automated bounce handling and integrated spam prevention.
Homepage: http://www.list.org/
Package: manpages-fr
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 860
Maintainer: Nicolas FRANCOIS (Nekral) <nicolas.francois@centraliens.net>
Architecture: all
Version: 3.65d1p1-1
Replaces: manpages-fr-extra (<= 20140506)
Suggests: man-db | man-browser, manpages-fr-dev, manpages-fr-extra
Description: French version of the manual pages about using GNU/Linux
This package contains the French translation of GNU/Linux manual pages
for these sections:
4 = Devices (e.g. hd, sd).
5 = File formats and protocols, syntaxes of several system
files (e.g. wtmp, /etc/passwd, nfs).
7 = Conventions and standards, macro packages, etc.
(e.g. nroff, ascii).
.
Sections 1, 6 and 8 are provided by the respective applications. This
package only includes the intro man page describing the section.
.
The man pages describe syntaxes of several system files.
Homepage: http://traduc.org/perkamon
Package: dbconfig-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1505
Maintainer: Paul Gevers <elbrus@debian.org>
Architecture: all
Version: 2.0.8
Depends: ucf, debconf (>= 0.5) | debconf-2.0
Suggests: dbconfig-mysql | dbconfig-pgsql | dbconfig-sqlite | dbconfig-sqlite3 | dbconfig-no-thanks
Breaks: bandwidthd-pgsql (<< 2.0.1+cvs20090917-9~)
Conffiles:
/etc/logrotate.d/dbconfig-common 45a82979da0a8c6b3e52fd7dfa4c01ec
Description: framework that helps packages to manage databases
This package contains the core of the dbconfig-common framework. This
framework presents a policy and implementation for managing various databases
used by applications included in Debian packages.
.
It can:
- support MySQL/MariaDB, PostgreSQL, and SQLite based applications;
- create or remove databases and database users;
- access local or remote databases;
- upgrade/modify databases when upstream changes database structure;
- generate config files in many formats with the database info;
- import configs from packages previously managing databases on their own;
- prompt users with a set of normalized, pre-translated questions;
- handle failures gracefully, with an option to retry;
- do all the hard work automatically;
- work for package maintainers with little effort on their part;
- work for local admins with little effort on their part;
- comply with an agreed upon set of standards for behavior;
- do absolutely nothing if that is the whim of the local admin;
- perform all operations from within the standard flow of
package management (no additional skill is required of the local
admin).
Package: dh-python
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 402
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.20170125
Replaces: python3 (<< 3.3.2-4~)
Depends: python3:any (>= 3.3.2-2~)
Suggests: libdpkg-perl
Breaks: python3 (<< 3.3.2-4~)
Description: Debian helper tools for packaging Python libraries and applications
This package contains:
* pybuild - invokes various build systems for requested Python versions in
order to build modules and extensions
* dh_python2 - calculates Python 2.X dependencies for Debian packages,
adds maintainer scripts to byte compile files, etc.
* dh_python3 - calculates Python 3.X dependencies for Debian packages,
adds maintainer scripts to byte compile files, etc.
* dh_pypy - calculates PyPy dependencies for Debian packages,
adds maintainer scripts to byte compile files, etc.
Package: libc6-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 15634
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.24-11+deb9u4
Provides: libc-dev
Depends: libc6 (= 2.24-11+deb9u4), libc-dev-bin (= 2.24-11+deb9u4), linux-libc-dev (>= 4.9.130-2)
Suggests: glibc-doc, manpages-dev
Breaks: binutils (<< 2.26), binutils-gold (<< 2.20.1-11), cmake (<< 2.8.4+dfsg.1-5), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2), gcc-4.6 (<< 4.6.0-12), libhwloc-dev (<< 1.2-3), libjna-java (<< 3.2.7-4), liblouis-dev (<< 2.3.0-2), liblouisxml-dev (<< 2.4.0-2), make (<< 3.81-8.1), pkg-config (<< 0.26-1)
Conflicts: libc0.1-dev, libc0.3-dev, libc6.1-dev
Description: GNU C Library: Development Libraries and Header Files
Contains the symlinks, headers, and object files needed to compile
and link programs which use the standard C library.
Homepage: http://www.gnu.org/software/libc/libc.html
Package: libslang2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1566
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: same
Source: slang2
Version: 2.3.1-5
Depends: libc6 (>= 2.14)
Description: S-Lang programming library - runtime version
S-Lang is a C programmer's library that includes routines for the rapid
development of sophisticated, user friendly, multi-platform applications.
.
This package contains only the shared library libslang.so.* and copyright
information. It is only necessary for programs that use this library (such
as jed and slrn). If you plan on doing development with S-Lang, you will
need the companion -dev package as well.
Built-Using: unicode-data (= 9.0-1)
Homepage: http://www.jedsoft.org/slang/
Package: cron
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 251
Maintainer: Javier Fernández-Sanguino Peña <jfs@debian.org>
Architecture: amd64
Version: 3.0pl1-128+deb9u2
Provides: cron-daemon
Depends: libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), init-system-helpers (>= 1.18~), debianutils (>= 1.7), adduser, lsb-base (>= 3.0-10), libpam-runtime (>= 1.0.1-11)
Pre-Depends: dpkg (>= 1.15.7.2)
Recommends: exim4 | postfix | mail-transport-agent
Suggests: anacron (>= 2.0-1), logrotate, checksecurity
Breaks: dpkg (<< 1.15.4)
Conffiles:
/etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2
/etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2
/etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2
/etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2
/etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2
/etc/crontab 8f111d100ea459f68d333d63a8ef2205
/etc/default/cron eae0d979b5007d2af41540d8c2631359
/etc/init.d/cron 85d7a3783889ea93dcda2fb488420c1c
/etc/pam.d/cron 11e788a7f7cd5477b10da2c7fd5ecdf0
Description: process scheduling daemon
The cron daemon is a background process that runs particular programs at
particular times (for example, every minute, day, week, or month), as
specified in a crontab. By default, users may also create crontabs of
their own so that processes are run on their behalf.
.
Output from the commands is usually mailed to the system administrator
(or to the user in question); you should probably install a mail system
as well so that you can receive these messages.
.
This cron package does not provide any system maintenance tasks. Basic
periodic maintenance tasks are provided by other packages, such
as checksecurity.
Homepage: http://ftp.isc.org/isc/cron/
Package: libmnl0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 46
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libmnl
Version: 1.0.4-2
Depends: libc6 (>= 2.14)
Description: minimalistic Netlink communication library
libmnl is a minimalistic user-space library oriented to Netlink developers.
There are a lot of common tasks in parsing, validating, constructing of
both the Netlink header and TLVs that are repetitive and easy to get wrong.
This library aims to provide simple helpers that allows you to re-use code
and to avoid re-inventing the wheel.
.
The main features of this library are:
.
Small: the shared library requires around 30KB for an x86-based computer.
.
Simple: this library avoids complexity and elaborated abstractions that
tend to hide Netlink details.
.
Easy to use: the library simplifies the work for Netlink-wise developers.
It provides functions to make socket handling, message building,
validating, parsing and sequence tracking, easier.
.
Easy to re-use: you can use the library to build your own abstraction
layer on top of this library.
.
Decoupling: the interdependency of the main bricks that compose the
library is reduced, i.e. the library provides many helpers, but the
programmer is not forced to use them.
.
This package contains the shared libraries needed to run programs that use
the minimalistic Netlink communication library.
Homepage: http://netfilter.org/projects/libmnl/
Package: certbot
Status: install ok installed
Priority: extra
Section: web
Installed-Size: 44
Maintainer: Debian Let's Encrypt <letsencrypt-devel@lists.alioth.debian.org>
Architecture: all
Source: python-certbot
Version: 0.10.2-1
Replaces: letsencrypt
Provides: letsencrypt
Depends: python-certbot (= 0.10.2-1), init-system-helpers (>= 1.18~), python:any (>= 2.7~)
Suggests: python-certbot-apache, python-certbot-doc
Breaks: letsencrypt (<= 0.6.0)
Conffiles:
/etc/cron.d/certbot 88d0bd291b44222e55a073ae3e4cdba3
Description: automatically configure HTTPS using Let's Encrypt
The objective of Certbot, Let's Encrypt, and the ACME (Automated
Certificate Management Environment) protocol is to make it possible
to set up an HTTPS server and have it automatically obtain a
browser-trusted certificate, without any human intervention. This is
accomplished by running a certificate management agent on the web
server.
.
This agent is used to:
.
- Automatically prove to the Let's Encrypt CA that you control the website
- Obtain a browser-trusted certificate and set it up on your web server
- Keep track of when your certificate is going to expire, and renew it
- Help you revoke the certificate if that ever becomes necessary.
.
This package contains the main application, including the standalone
and the manual authenticators.
Homepage: https://certbot.eff.org/
Package: libassuan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 106
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libassuan
Version: 2.4.3-2
Depends: libc6 (>= 2.14), libgpg-error0 (>= 1.14)
Description: IPC library for the GnuPG components
Libassuan is a small library implementing the so-called "Assuan
protocol". This protocol is used for IPC between most newer GnuPG
components. Both server and client side functions are provided.
Homepage: https://www.gnupg.org/related_software/libassuan/index.html
Package: awstats
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 6799
Maintainer: Sergey B Kirpichev <skirpichev@gmail.com>
Architecture: all
Version: 7.6+dfsg-1+deb9u2
Depends: perl:any
Recommends: libnet-xwhois-perl, coreutils (>= 7.4)
Suggests: apache2 | httpd, libnet-dns-perl, libnet-ip-perl, libgeo-ipfree-perl, liburi-perl
Conffiles:
/etc/awstats/awstats.conf ca989fe9ec7f711ecfdec844d2c61554
/etc/awstats/awstats.conf.local a81e04b5114654f0fa2c958b06c278a4
/etc/cron.d/awstats 85d807f22e26f7fda97f706fc4e9627a
/etc/default/awstats d60311bc5d8dafd142da5fedf07d52b8
/etc/logrotate.d/httpd-prerotate/awstats/prerotate.sh abea657e435825ace595bd8171172de5
Description: powerful and featureful web server log analyzer
Advanced Web Statistics (AWStats) is a powerful web server logfile
analyzer written in perl that shows you all your web statistics including
visits, unique visitors, pages, hits, rush hours, search engines, keywords
used to find your site, robots, broken links and more. Gives more detailed
information and better graphical charts than webalizer, and is easier to use.
Works with several web server log format as a CGI and/or from command line.
Supports more than 30 languages.
Homepage: http://awstats.sourceforge.net/
Package: libwww-robotrules-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 80
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.01-1
Replaces: libwww-perl (<< 6.00)
Depends: perl, liburi-perl
Breaks: libwww-perl (<< 6.00)
Description: database of robots.txt-derived permissions
WWW::RobotRules parses /robots.txt files as specified in "A Standard for
Robot Exclusion", at <http://www.robotstxt.org/wc/norobots.html>. Webmasters
can use the /robots.txt file to forbid conforming robots from accessing parts
of their web site.
.
The parsed files are kept in a WWW::RobotRules object, and this object
provides methods to check if access to a given URL is prohibited. The same
WWW::RobotRules object can be used for one or more parsed /robots.txt files
on any number of hosts.
Homepage: http://search.cpan.org/dist/WWW-RobotRules/
Package: libxcb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 283
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.12-1
Depends: libc6 (>= 2.14), libxau6, libxdmcp6
Breaks: alsa-utils (<< 1.0.24.2-5)
Description: X C Binding
This package contains the library files needed to run software using libxcb,
the X C Binding.
.
The XCB library provides an interface to the X Window System protocol,
designed to replace the Xlib interface. XCB provides several advantages over
Xlib:
.
* Size: small library and lower memory footprint
* Latency hiding: batch several requests and wait for the replies later
* Direct protocol access: one-to-one mapping between interface and protocol
* Thread support: access XCB from multiple threads, with no explicit locking
* Easy creation of new extensions: automatically generates interface from
machine-parsable protocol descriptions
Homepage: http://xcb.freedesktop.org
Package: libusb-0.1-4
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 57
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libusb
Version: 2:0.1.12-30
Replaces: libusb-dev (<< 2:0.1.12-25)
Depends: libc6 (>= 2.15)
Description: userspace USB programming library
Library for programming USB applications without the knowledge
of Linux kernel internals.
.
This package contains what you need to run programs that use this
library.
Homepage: http://www.linux-usb.org/
Package: locales
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 9246
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Source: glibc
Version: 2.24-11+deb9u4
Replaces: manpages-fr-extra (<< 20141022)
Depends: libc-bin (>> 2.24), libc-l10n (>> 2.24), debconf (>= 0.5) | debconf-2.0
Conffiles:
/etc/locale.alias 53e10994fabc5169907e413b792785dd
Description: GNU C Library: National Language (locale) data [support]
Machine-readable data files, shared objects and programs used by the
C library for localization (l10n) and internationalization (i18n) support.
.
This package contains tools to generate locale definitions from source
files (included in this package). It allows you to customize which
definitions actually get generated. This is a space-saver over how this
package used to be, with all locales generated by default. This created
a package that unpacked to an excess of 30 megs.
Homepage: http://www.gnu.org/software/libc/libc.html
Package: libmcrypt4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 219
Maintainer: RISKO Gergely <risko@debian.org>
Architecture: amd64
Source: libmcrypt
Version: 2.5.8-3.3
Depends: libc6 (>= 2.14)
Suggests: libmcrypt-dev, mcrypt
Description: De-/Encryption Library
libmcrypt is the library which implements all the algorithms and
modes found in mcrypt.
.
libmcrypt supports the algorithms: BLOWFISH, TWOFISH, DES, TripleDES,
3-WAY, SAFER-sk64, SAFER-sk128, SAFER+, LOKI97, GOST, RC2, RC6, MARS,
IDEA, RIJNDAEL-128, RIJNDAEL-192, SERPENT, RIJNDAEL-256, CAST-128
(known as CAST5), CAST-256, ARCFOUR, ENIGMA, PANAMA, XTEA and WAKE.
Block algorithms can be used in: CBC, ECB, CFB and OFB (8 bit and n
bit, where n is the size of the algorithm's block length).
.
More information can be found at the libmcrypt homepage
http://mcrypt.sourceforge.net/ .
Homepage: http://mcrypt.sourceforge.net/
Package: php-mysql
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 12
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: all
Source: php-defaults (49)
Version: 1:7.0+49
Depends: php-common, php7.0-mysql
Description: MySQL module for PHP [default]
This package provides a MySQL module for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
.
This package is a dependency package, which depends on Debian's default
PHP version (currently 7.0).
Package: libauthen-sasl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 155
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.1600-1
Depends: perl
Suggests: libdigest-hmac-perl, libgssapi-perl
Description: Authen::SASL - SASL Authentication framework
SASL is a generic mechanism for authentication used by several network
protocols. Authen::SASL provides an implementation framework that all
protocols should be able to share.
.
The framework allows different implementations of the connection class
to be plugged in. At the time of writing there were two such plugins:
- Authen::SASL::Perl
This module implements several mechanisms and is implemented
entirely in Perl.
- Authen::SASL::Cyrus
This module uses the Cyrus SASL C-library (both version 1 and 2 are
supported).
Homepage: https://metacpan.org/release/Authen-SASL
Package: logrotate
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 132
Maintainer: Paul Martin <pm@debian.org>
Architecture: amd64
Version: 3.11.0-0.1
Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.14), libpopt0 (>= 1.14), libselinux1 (>= 1.32), cron | anacron | cron-daemon, base-passwd (>= 2.0.3.4)
Recommends: bsd-mailx | mailx
Breaks: postgresql-common (<= 126)
Conffiles:
/etc/cron.daily/logrotate d2281ecb6f898b446ac8a5984ab5a243
/etc/logrotate.conf 176edd439a499501372cf3d04e795810
Description: Log rotation utility
The logrotate utility is designed to simplify the administration of
log files on a system which generates a lot of log files. Logrotate
allows for the automatic rotation compression, removal and mailing of
log files. Logrotate can be set to handle a log file daily, weekly,
monthly or when the log file gets to a certain size. Normally, logrotate
runs as a daily cron job.
Homepage: https://github.com/logrotate/logrotate
Package: libdbi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 2102
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 1.636-1+deb9u2
Provides: perl-dbdabi-94
Depends: perl (>= 5.24.1-3+deb9u7), perlapi-5.24.1, libc6 (>= 2.4)
Suggests: libclone-perl (>= 0.34), libmldbm-perl, libnet-daemon-perl, libsql-statement-perl (>= 1.402)
Breaks: libdbd-anydata-perl (<< 0.11+), libdbd-csv-perl (<< 0.3600+), libsql-statement-perl (<< 1.33+)
Description: Perl Database Interface (DBI)
DBI (DataBase Interface) is a Perl framework that provides a common interface
to access various backend databases in a uniform manner. DBD (DataBase Driver)
modules provide implementations for various backend data storage mechanisms
including networked relational databases (particularly SQL databases) and even
web services such as the Google search engine.
.
It is extremely portable and available for a wide range of operating systems,
architectures and data stores, including:
.
* Oracle
* Microsoft SQL Server
* IBM DB2
* SQLite
* PostgreSQL
* Firebird
* MySQL
Homepage: http://dbi.perl.org/
Package: git
Status: install ok installed
Priority: optional
Section: vcs
Installed-Size: 28865
Maintainer: Gerrit Pape <pape@smarden.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1:2.11.0-3+deb9u7
Replaces: git-core (<< 1:1.7.0.4-1.), gitweb (<< 1:1.7.4~rc1)
Provides: git-completion, git-core
Depends: libc6 (>= 2.16), libcurl3-gnutls (>= 7.16.2), libexpat1 (>= 2.0.1), libpcre3, zlib1g (>= 1:1.2.0), perl, liberror-perl, git-man (>> 1:2.11.0), git-man (<< 1:2.11.0-.)
Pre-Depends: dpkg (>= 1.17.13)
Recommends: patch, less, rsync, ssh-client
Suggests: gettext-base, git-daemon-run | git-daemon-sysvinit, git-doc, git-el, git-email, git-gui, gitk, gitweb, git-arch, git-cvs, git-mediawiki, git-svn
Breaks: bash-completion (<< 1:1.90-1), cogito (<= 0.18.2+), git-buildpackage (<< 0.6.5), git-core (<< 1:1.7.0.4-1.), gitosis (<< 0.2+20090917-7), gitpkg (<< 0.15), gitweb (<< 1:1.7.4~rc1), guilt (<< 0.33), stgit (<< 0.15), stgit-contrib (<< 0.15)
Conffiles:
/etc/bash_completion.d/git-prompt 7baac5c3ced94ebf2c0e1dde65c3b1a6
Description: fast, scalable, distributed revision control system
Git is popular version control system designed to handle very large
projects with speed and efficiency; it is used for many high profile
open source projects, most notably the Linux kernel.
.
Git falls in the category of distributed source code management tools.
Every Git working directory is a full-fledged repository with full
revision tracking capabilities, not dependent on network access or a
central server.
.
This package provides the git main components with minimal dependencies.
Additional functionality, e.g. a graphical user interface and revision
tree visualizer, tools for interoperating with other VCS's, or a web
interface, is provided as separate git* packages.
Homepage: https://git-scm.com/
Package: libsepol1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 653
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 2.6-2
Depends: libc6 (>= 2.14)
Description: SELinux library for manipulating binary security policies
Security-enhanced Linux is a patch of the Linux kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement®, Role-based Access
Control, and Multi-level Security.
.
libsepol provides an API for the manipulation of SELinux binary policies.
It is used by checkpolicy (the policy compiler) and similar tools, as well
as by programs like load_policy that need to perform specific transformations
on binary policies such as customizing policy boolean settings.
Homepage: http://userspace.selinuxproject.org/
Package: libitm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 127
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.14)
Description: GNU Transactional Memory Library
GNU Transactional Memory Library (libitm) provides transaction support for
accesses to the memory of a process, enabling easy-to-use synchronization of
accesses to shared memory by several threads.
Homepage: http://gcc.gnu.org/
Package: libx11-data
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 1666
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libx11
Version: 2:1.6.4-3+deb9u4
Breaks: libx11-6 (<< 2:1.4.1)
Description: X11 client-side library
This package provides the locale data files for libx11.
.
More information about X.Org can be found at:
<URL:https://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libX11
Package: libpython2.7-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 8558
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python2.7
Version: 2.7.13-2+deb9u6
Replaces: python2.7 (<< 2.7.5-0~)
Provides: python-argparse, python2.7-argparse, python2.7-celementtree, python2.7-cjkcodecs, python2.7-ctypes, python2.7-elementtree, python2.7-profiler, python2.7-wsgiref
Depends: libpython2.7-minimal (= 2.7.13-2+deb9u6), mime-support, libbz2-1.0, libc6 (>= 2.15), libdb5.3, libexpat1 (>= 2.1~beta3), libffi6 (>= 3.0.4), libncursesw5 (>= 6), libreadline7 (>= 7.0~beta), libsqlite3-0 (>= 3.5.9), libssl1.1 (>= 1.1.0), libtinfo5 (>= 6)
Breaks: python-urllib3 (<< 1.9.1-3)
Description: Interactive high-level object-oriented language (standard library, version 2.7)
Python is a high-level, interactive, object-oriented language. Its 2.7 version
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package contains Python 2.7's standard library. It is normally not
used on its own, but as a dependency of python2.7.
Package: python
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 648
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python-defaults
Version: 2.7.13-2
Replaces: python-dev (<< 2.6.5-2)
Provides: python-ctypes, python-email, python-importlib, python-profiler, python-wsgiref
Depends: python2.7 (>= 2.7.13-1~), libpython-stdlib (= 2.7.13-2)
Pre-Depends: python-minimal (= 2.7.13-2)
Suggests: python-doc (= 2.7.13-2), python-tk (>= 2.7.13-1~)
Breaks: update-manager-core (<< 0.200.5-2)
Conflicts: python-central (<< 0.5.5)
Description: interactive high-level object-oriented language (default version)
Python, the high-level, interactive object oriented language,
includes an extensive class library with lots of goodies for
network programming, system administration, sounds and graphics.
.
This package is a dependency package, which depends on Debian's default
Python version (currently v2.7).
Homepage: http://www.python.org/
Package: php-gettext
Status: install ok installed
Priority: extra
Section: oldlibs
Installed-Size: 15
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Version: 1.0.12-0.1
Depends: php-php-gettext
Description: transitional dummy package for php-php-gettext
This dummy package is provided to smooth the upgrade
from php-gettext to php-php-gettext and can be safely removed afterwards
Homepage: https://launchpad.net/php-gettext/
Package: libxau6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 61
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxau
Version: 1:1.0.8-1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: X11 authorisation library
This package provides the main interface to the X11 authorisation handling,
which controls authorisation for X connections, both client-side and
server-side.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This module can be found at
git://anongit.freedesktop.org/git/xorg/lib/libXau
Package: python3-jwt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 69
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: pyjwt
Version: 1.4.2-1+deb9u1
Depends: python3:any (>= 3.3.2-2~)
Recommends: python3-cryptography
Suggests: python3-crypto
Description: Python 3 implementation of JSON Web Token
PyJWT implements the JSON Web Token draft 01, a way of representing
signed content using JSON data structures.
.
Supported algorithms for cryptographic signing:
.
* HS256 - HMAC using SHA-256 hash algorithm (default)
* HS384 - HMAC using SHA-384 hash algorithm
* HS512 - HMAC using SHA-512 hash algorithm
* RS256 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-256 hash
algorithm
* RS384 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-384 hash
algorithm
* RS512 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-512 hash
algorithm
.
Supported reserved claim names:
- "exp" (Expiration Time) Claim
.
This package contains the Python 3 version of the library.
Homepage: https://github.com/jpadilla/pyjwt
Package: libunix-syslog-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 73
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libunix-syslog-perl (1.1-2)
Version: 1.1-2+b6
Depends: perl (>= 5.24.1~rc3-2), perlapi-5.24.1, libc6 (>= 2.4)
Description: Perl interface to the UNIX syslog(3) calls
This module provides an interface to the system logger syslogd(8) via
Perl's XSUBs. The implementation attempts to resemble the native
libc-functions of your system, so that anyone being familiar with
syslog.h should be able to use this module right away.
Homepage: http://search.cpan.org/dist/Unix-Syslog/
Package: libc-client2007e
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1403
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: amd64
Source: uw-imap
Version: 8:2007f~dfsg-5+deb9u1
Depends: libpam-modules, mlock, libc6 (>= 2.14), libcomerr2 (>= 1.01), libgssapi-krb5-2 (>= 1.14+dfsg), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libpam0g (>= 0.99.7.1), libssl1.1 (>= 1.1.0)
Suggests: uw-mailutils
Description: c-client library for mail protocols - library files
IMAP (Internet Message Access Protocol) is a method of accessing
electronic messages kept on a (possibly shared) mail server.
.
The UW (University of Washington) IMAP toolkit provides the c-client
mail-handling library supporting various network transport methods,
file system storage formats, and authentication and authorization
methods.
.
This package contains the shared c-client library.
Homepage: http://www.washington.edu/imap/
Package: autopoint
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 454
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: all
Multi-Arch: foreign
Source: gettext
Version: 0.19.8.1-2+deb9u1
Replaces: gettext (<= 0.17-11)
Depends: xz-utils
Description: The autopoint program from GNU gettext
The `autopoint' program copies standard gettext infrastructure files
into a source package. It extracts from a macro call of the form
`AM_GNU_GETTEXT_VERSION(VERSION)', found in the package's
`configure.in' or `configure.ac' file, the gettext version used by the
package, and copies the infrastructure files belonging to this version
into the package.
Homepage: http://www.gnu.org/software/gettext/
Package: libidn11
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 307
Maintainer: Debian Libidn Team <help-libidn@gnu.org>
Architecture: amd64
Multi-Arch: same
Source: libidn
Version: 1.33-1+deb9u1
Replaces: libidn11-dev
Depends: libc6 (>= 2.14)
Conflicts: libidn9-dev
Description: GNU Libidn library, implementation of IETF IDN specifications
GNU Libidn is a fully documented implementation of the Stringprep,
Punycode and IDNA specifications. Libidn's purpose is to encode and
decode internationalized domain names. The Nameprep, XMPP, SASLprep,
and iSCSI profiles are supported.
.
This package contains the shared library.
Homepage: https://www.gnu.org/software/libidn/
Package: libmpdec2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 254
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: mpdecimal
Version: 2.4.2-1
Replaces: libmpdec2.3
Depends: libc6 (>= 2.14)
Breaks: libmpdec2.3
Description: library for decimal floating point arithmetic (runtime library)
mpdecimal is a package for correctly-rounded arbitrary precision decimal
floating point arithmetic.
Homepage: http://www.bytereef.org/mpdecimal/index.html
Package: fuse
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 136
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Version: 2.9.7-1+deb9u2
Depends: libc6 (>= 2.14), libfuse2 (= 2.9.7-1+deb9u2), adduser, mount (>= 2.19.1), sed (>= 4)
Conffiles:
/etc/fuse.conf 298587592c8444196833f317def414f2
Description: Filesystem in Userspace
Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
export a virtual filesystem to the Linux kernel. It also aims to provide a
secure method for non privileged users to create and mount their own filesystem
implementations.
Homepage: https://github.com/libfuse/libfuse/wiki
Package: rsyslog
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 1507
Maintainer: Michael Biebl <biebl@debian.org>
Architecture: amd64
Version: 8.24.0-1+deb9u3
Provides: linux-kernel-log-daemon, system-log-daemon
Depends: libc6 (>= 2.17), libestr0 (>= 0.1.4), libfastjson4 (>= 0.99.3), liblogging-stdlog0 (>= 1.0.2), liblognorm5 (>= 1.1.2), libsystemd0 (>= 209), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4), init-system-helpers (>= 1.47~), lsb-base (>= 3.2-14)
Recommends: logrotate
Suggests: rsyslog-mysql | rsyslog-pgsql, rsyslog-mongodb, rsyslog-doc, rsyslog-gnutls, rsyslog-gssapi, rsyslog-relp
Conflicts: linux-kernel-log-daemon, system-log-daemon
Conffiles:
/etc/default/rsyslog c7af23c348917e877399baea1849727a
/etc/init.d/rsyslog 08213cf202f2552298f62a007487e01c
/etc/logcheck/ignore.d.server/rsyslog 650507df599fbbdd6cb4142bd77fd2ff
/etc/logrotate.d/rsyslog b995d89ccfe4a83ac3ffc5ab95b80f7b
/etc/rsyslog.conf 5a9fe60ec2ef27265b8ca19c286a545f
Description: reliable system and kernel logging daemon
Rsyslog is a multi-threaded implementation of syslogd (a system utility
providing support for message logging), with features that include:
* reliable syslog over TCP, SSL/TLS and RELP
* on-demand disk buffering
* email alerting
* writing to MySQL or PostgreSQL databases (via separate output plugins)
* permitted sender lists
* filtering on any part of the syslog message
* on-the-wire message compression
* fine-grained output format control
* failover to backup destinations
* enterprise-class encrypted syslog relaying
.
It is the default syslogd on Debian systems.
Homepage: http://www.rsyslog.com/
Package: libclass-accessor-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 104
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.34-1
Depends: perl, libsub-name-perl
Description: Perl module that automatically generates accessors
Class::Accessor automagically generates accessor/mutator methods for your
class. Most of the time, writing accessors is an exercise in cutting and
pasting. If you make your module a subclass of Class::Accessor and declare
your accessor fields with mk_accessors() then you will find yourself with a
set of automatically generated accessors which can even be customized.
Homepage: http://search.cpan.org/dist/Class-Accessor/
Package: libdbus-1-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 450
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: dbus
Version: 1.10.32-0+deb9u1
Depends: libc6 (>= 2.17), libsystemd0 (>= 209)
Recommends: dbus
Breaks: dbus (<< 1.9.16-1~)
Description: simple interprocess messaging system (library)
D-Bus is a message bus, used for sending messages between applications.
Conceptually, it fits somewhere in between raw sockets and CORBA in
terms of complexity.
.
D-Bus supports broadcast messages, asynchronous messages (thus
decreasing latency), authentication, and more. It is designed to be
low-overhead; messages are sent using a binary protocol, not using
XML. D-Bus also supports a method call mapping for its messages, but
it is not required; this makes using the system quite simple.
.
It comes with several bindings, including GLib, Python, Qt and Java.
.
The daemon can be found in the dbus package.
Homepage: http://dbus.freedesktop.org/
Package: libip6tc0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 114
Maintainer: Arturo Borrero Gonzalez <arturo@debian.org>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.6.0+snapshot20161117-6
Depends: libc6 (>= 2.14)
Description: netfilter libip6tc library
The user-space iptables (IPv6) C library from the Netfilter xtables framework.
.
iptables IPv6 ruleset ADT and kernel interface.
.
This library has been considered private for years (and still is), in the
sense of changing symbols and backward compatibility not guaranteed.
Homepage: http://www.netfilter.org/
Package: libclass-dbi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 280
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 3.0.17-4
Depends: libclass-accessor-perl (>= 0.18), libclass-data-inheritable-perl (>= 0.02), libima-dbi-perl (>= 0.33), libclass-trigger-perl (>= 0.07), libuniversal-moniker-perl (>= 0.06), libclone-perl, perl
Recommends: libclass-dbi-abstractsearch-perl
Suggests: libclass-dbi-pg-perl, libclass-dbi-mysql-perl, libclass-dbi-sqlite-perl, libclass-dbi-loader-perl
Description: convenient abstraction layer to a database
Class::DBI not only provides a simple database to object mapping
layer, but can be used to implement several higher order database
functions (triggers, referential integrity, cascading delete etc.),
at the application level, rather than at the database.
.
This is particularly useful when using a database which doesn't
support these (such as MySQL), or when you would like your code to be
portable across multiple databases which might implement these things
in different ways.
.
In short, Class::DBI aims to make it simple to introduce 'best
practice' when dealing with data stored in a relational database.
Homepage: http://search.cpan.org/~tmtm/Class-DBI/
Package: libgcc1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 108
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6 (6.3.0-18+deb9u1)
Version: 1:6.3.0-18+deb9u1
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.14)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC support library
Shared version of the support library, a library of internal subroutines
that GCC uses to overcome shortcomings of particular machines, or
special needs for some languages.
Homepage: http://gcc.gnu.org/
Package: python-zope.event
Status: install ok installed
Priority: optional
Section: zope
Installed-Size: 40
Maintainer: Debian/Ubuntu Zope Team <pkg-zope-developers@lists.alioth.debian.org>
Architecture: all
Source: zope.event
Version: 4.2.0-1
Depends: python-pkg-resources, python:any (<< 2.8), python:any (>= 2.7.5-5~)
Description: Very basic event publishing system
This package provides a simple event system. It provides an event publishing
system and a very simple event-dispatching system on which more sophisticated
event dispatching systems can be built. For example, a type-based event
dispatching system that builds on zope.event can be found in zope.component.
.
This is the Python 2 library.
Homepage: http://pypi.python.org/pypi/zope.event
Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 3558
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.29.2-1+deb9u1
Replaces: bash-completion (<< 1:2.1-4.1~), initscripts (<< 2.88dsf-59.2~), mount (= 2.26.2-3), mount (= 2.26.2-3ubuntu1), sysvinit-utils (<< 2.88dsf-59.1~)
Pre-Depends: libblkid1 (>= 2.25), libc6 (>= 2.15), libfdisk1 (>= 2.29~rc2), libmount1 (>= 2.25), libncursesw5 (>= 6), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.6-3~), libsmartcols1 (>= 2.28~rc1), libsystemd0, libtinfo5 (>= 6), libudev1 (>= 183), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: dosfstools, kbd | console-tools, util-linux-locales
Breaks: bash-completion (<< 1:2.1-4.1~), cloud-utils (<< 0.27-1~), grml-debootstrap (<< 0.68), mount (= 2.26.2-3), mount (= 2.26.2-3ubuntu1), sysvinit-utils (<< 2.88dsf-59.4~)
Conffiles:
/etc/default/hwclock 3916544450533eca69131f894db0ca12
/etc/init.d/hwclock.sh 1ca5c0743fa797ffa364db95bb8d8d8e
/etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
/etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
Description: miscellaneous system utilities
This package contains a number of important utilities, most of which
are oriented towards maintenance of your system. Some of the more
important utilities included in this package allow you to partition
your hard disk, view kernel messages, and create new filesystems.
Package: libustr-1.0-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 258
Maintainer: Vaclav Ovsik <vaclav.ovsik@i.cz>
Architecture: amd64
Multi-Arch: same
Source: ustr
Version: 1.0.4-6
Depends: libc6 (>= 2.14)
Description: Micro string library: shared library
ustr (Micro string library) is a string API for C. It has tiny overhead over
just plain strdup(), is much safer, is easier to use, is faster for many
operations, can be used with read-only or automatically allocated data. You
don't even need to link to the library to use it (so there are no
dependencies).
.
This package contains the shared library.
Homepage: http://www.and.org/ustr/
Package: liblzo2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 163
Maintainer: Peter Eisentraut <petere@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lzo2 (2.08-1.2)
Version: 2.08-1.2+b2
Depends: libc6 (>= 2.14)
Description: data compression library
LZO is a portable, lossless data compression library.
It offers pretty fast compression and very fast decompression.
Decompression requires no memory. In addition there are slower
compression levels achieving a quite competitive compression ratio
while still decompressing at this very high speed.
Homepage: http://www.oberhumer.com/opensource/lzo/
Package: tasksel
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 374
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: all
Version: 3.39
Depends: debconf (>= 0.5) | debconf-2.0, liblocale-gettext-perl, apt, tasksel-data, perl-base (>= 5.14.0-1)
Pre-Depends: debconf (>= 1.5.34) | cdebconf (>= 0.106)
Conflicts: base-config (<< 2.32), debconf (<< 1.4.27)
Description: tool for selecting tasks for installation on Debian systems
This package provides 'tasksel', a simple interface for users who
want to configure their system to perform a specific task.
Package: python2.7-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 3812
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python2.7
Version: 2.7.13-2+deb9u6
Replaces: python2.7 (<< 2.7.8-7~)
Depends: libpython2.7-minimal (= 2.7.13-2+deb9u6), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.15)
Recommends: python2.7
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 2.7)
This package contains the interpreter and some essential modules. It can
be used in the boot process for some basic tasks.
See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules
contained in this package.
Package: libwrap0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 104
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: tcp-wrappers
Version: 7.6.q-26
Replaces: tcpd (<< 7.6.q-20)
Depends: libc6 (>= 2.14)
Recommends: tcpd
Breaks: tcpd (<< 7.6.q-20)
Description: Wietse Venema's TCP wrappers library
Wietse Venema's network logger, also known as TCPD or LOG_TCP.
.
These programs log the client host name of incoming telnet,
ftp, rsh, rlogin, finger etc. requests.
.
Security options are:
- access control per host, domain and/or service;
- detection of host name spoofing or host address spoofing;
- booby traps to implement an early-warning system.
Package: postfix
Status: install ok installed
Priority: extra
Section: mail
Installed-Size: 3931
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: amd64
Version: 3.1.15-0+deb9u1
Replaces: mail-transport-agent
Provides: mail-transport-agent
Depends: libc6 (>= 2.14), libdb5.3, libicu57 (>= 57.1-1~), libsasl2-2, libssl1.1 (>= 1.1.0), debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), netbase, adduser (>= 3.48), dpkg (>= 1.8.3), lsb-base (>= 3.0-6), ssl-cert, cpio, postfix-sqlite
Recommends: python3
Suggests: procmail, postfix-mysql, postfix-pgsql, postfix-ldap, postfix-pcre, postfix-lmdb, sasl2-bin, libsasl2-modules, dovecot-common, resolvconf, postfix-cdb, mail-reader, ufw, postfix-doc
Conflicts: mail-transport-agent, smail
Conffiles:
/etc/init.d/postfix 1f9aa4b0a642e520f8a585c89ec388db
/etc/insserv.conf.d/postfix 7fe2d086ff4822fc9fe13adab1090dce
/etc/network/if-down.d/postfix 476028824e6fefb251ded3df27a420b3
/etc/network/if-up.d/postfix db407690984994196e2c953b610d741f
/etc/postfix/makedefs.out 093b260e83df6f33fd9d3a71de52b30e
/etc/postfix/post-install ed83d3b1b6cbd8e30067e7c9a79fa50f
/etc/postfix/postfix-files b0336ad3d8d03f4aee33bc06c806bd38
/etc/postfix/postfix-script ff3d2588aa94cdd58c490e37cb80b548
/etc/ppp/ip-down.d/postfix 476028824e6fefb251ded3df27a420b3
/etc/ppp/ip-up.d/postfix db407690984994196e2c953b610d741f
/etc/resolvconf/update-libc.d/postfix 0eb42cb5df572c0af15ea8d29340d107
/etc/rsyslog.d/postfix.conf d8a09827fff2a22311e4dd4a83e95c83
/etc/ufw/applications.d/postfix 5c7e746dc9255e750b8f50460de11a32
Description: High-performance mail transport agent
Postfix is Wietse Venema's mail transport agent that started life as an
alternative to the widely-used Sendmail program. Postfix attempts to
be fast, easy to administer, and secure, while at the same time being
sendmail compatible enough to not upset existing users. Thus, the outside
has a sendmail-ish flavor, but the inside is completely different.
Homepage: http://www.postfix.org
Package: libfile-copy-recursive-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 88
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.38-1
Depends: perl (>= 5.6.0-16)
Description: Perl extension for recursively copying files and directories
File::Copy::Recursive module copies and moves directories recursively
(or single files, well... singley) to an optional depth and attempts
to preserve each file or directory's mode.
Homepage: http://search.cpan.org/dist/File-Copy-Recursive/
Package: ruby-power-assert
Status: install ok installed
Priority: optional
Section: ruby
Installed-Size: 35
Maintainer: Debian Ruby Extras Maintainers <pkg-ruby-extras-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.3.0-1
Description: library showing values of variables and method calls in an expression
Power Assert shows each value of variables and method calls in the
expression. It is useful for testing, providing which value wasn't
correct when the condition is not satisfied.
Homepage: https://github.com/k-tsj/power_assert
Ruby-Versions: all
Package: libpython3.5-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 3749
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.5
Version: 3.5.3-1+deb9u5
Depends: libc6 (>= 2.14), libssl1.1 (>= 1.1.0)
Recommends: libpython3.5-stdlib
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
/etc/python3.5/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 3.5)
This package contains some essential modules. It is normally not
used on it's own, but as a dependency of python3.5-minimal.
Package: eject
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 229
Maintainer: Frank Lichtenheld <djpig@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.1.5+deb1+cvs20081104-13.2
Depends: libc6 (>= 2.8), libdevmapper1.02.1 (>= 2:1.02.97)
Suggests: cdtool, setcd
Description: ejects CDs and operates CD-Changers under Linux
This little program will eject CD-ROMs (assuming your drive supports
the CDROMEJECT ioctl). It also allows setting the autoeject feature.
.
On supported ATAPI/IDE multi-disc CD-ROM changers, it allows changing
the active disc.
.
You can also use eject to properly disconnect external mass-storage
devices like digital cameras or portable music players.
Homepage: http://www.pobox.com/~tranter/eject.html
Package: libhttp-negotiate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 76
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.00-2
Replaces: libwww-perl (<< 6.00)
Depends: perl, libhttp-message-perl
Breaks: libwww-perl (<< 6.00)
Description: implementation of content negotiation
HTTP::Negotiate provides a complete implementation of the HTTP content
negotiation algorithm. Content negotiation allows for the selection of a
preferred content representation based upon attributes of the negotiable
variants and the value of the various Accept* header fields in the request.
Homepage: http://search.cpan.org/dist/HTTP-Negotiate/
Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 799
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.4-1
Pre-Depends: libc6 (>= 2.14), libselinux1 (>= 1.32)
Description: GNU stream editor for filtering/transforming text
sed reads the specified files or the standard input if no
files are specified, makes editing changes according to a
list of commands, and writes the results to the standard
output.
Homepage: https://www.gnu.org/software/sed/
Package: cloud-init
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1382
Maintainer: Debian Cloud Team <debian-cloud@lists.debian.org>
Architecture: all
Version: 0.7.9-2+deb9u1
Depends: gdisk, lsb-base, lsb-release, net-tools, ifupdown, procps, debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), python3 (>= 3.2), python3-configobj, python3-jinja2, python3-jsonpatch, python3-oauthlib, python3-prettytable, python3-requests, python3-six, python3-yaml, python3:any (>= 3.3.2-2~)
Conffiles:
/etc/NetworkManager/dispatcher.d/hook-network-manager 5fe06610f28360e90a8c04febddd384b
/etc/cloud/cloud.cfg 8cb6d65cd953fc06c05d75adede007af
/etc/cloud/cloud.cfg.d/00_debian.cfg 708307751e5df58dca385de5845777fb
/etc/cloud/cloud.cfg.d/05_logging.cfg aaed6d73c960381f36743c24a1603aab
/etc/cloud/cloud.cfg.d/README 4d1d62d930571121d5256ef77ce9f519
/etc/cloud/templates/chef_client.rb.tmpl 7acb4753d53a089ff1dfd4ba609c7539
/etc/cloud/templates/hosts.debian.tmpl 9428dea5215e15af505662c06d8b174c
/etc/cloud/templates/hosts.freebsd.tmpl 4b24f77244877db02fa3cccef97b0827
/etc/cloud/templates/hosts.redhat.tmpl bd5a1edd50c1d8b27c5f51ed44040c19
/etc/cloud/templates/hosts.suse.tmpl 02e0760db2910c603002760387744f8b
/etc/cloud/templates/ntp.conf.debian.tmpl eb6451423e8945002bc353beb9f7b3f0
/etc/cloud/templates/ntp.conf.fedora.tmpl eb6d3fe3d4ddebfe0e310843e8bbc82b
/etc/cloud/templates/ntp.conf.rhel.tmpl 3437363e2f2dd82c94f8c787fc957ee8
/etc/cloud/templates/ntp.conf.sles.tmpl 7750bbba5f2fb89dea6bf374037cfeda
/etc/cloud/templates/ntp.conf.ubuntu.tmpl 645795fb4ef5d9801111f7d1eb27d91d
/etc/cloud/templates/resolv.conf.tmpl 169f36939305409fffb0e9a4bee27b30
/etc/cloud/templates/sources.list.debian.tmpl b2a989e5eaf24c9b0d2c4b65ef0ab6f6
/etc/cloud/templates/sources.list.ubuntu.tmpl 0f14e3389d4a44be28b241c29afa584e
/etc/dhcp/dhclient-exit-hooks.d/hook-dhclient aa6f407b6895c130f2809755373e739f
/etc/init.d/cloud-config 5be7f09acfb69f71526a9c6c23c31e32
/etc/init.d/cloud-final 15fc2d68231ce0929139589910314d99
/etc/init.d/cloud-init 81e6e95a2d2c8a45ea5b1ac4bc11e491
/etc/init.d/cloud-init-local 9bbb2ee504e1d08b1433fb85795bab7f
/etc/init/cloud-config.conf 710d4e0ddc05367b20bc0b735de0f412
/etc/init/cloud-final.conf 9a24e799bc63d122deaa66fff6d2997f
/etc/init/cloud-init-blocknet.conf 8283f3ae87e737c4bbc48e51a3a851e6
/etc/init/cloud-init-container.conf 216ae1b50f1637ce7db5f7e1339d8106
/etc/init/cloud-init-local.conf 632f72e54cd45e36715862d90e7eb26c
/etc/init/cloud-init-nonet.conf 45fac884b97aa61c5d62d785ca9bc5c6
/etc/init/cloud-init.conf 705063cec926d28fb635427258aa2b9b
/etc/init/cloud-log-shutdown.conf 46c340d8f517cbf42562ee6e516908ed
/etc/profile.d/Z99-cloud-locale-test.sh 6b666ce510d8939f5dc8f254c6700abd
/etc/rsyslog.d/21-cloudinit.conf d4cf2e5d3cb9914cf7e6cdc08d298339
Description: initialization system for infrastructure cloud instances
Cloud-init provides a framework and tool to configure and customize virtual
machine instances for Infrastructure-as-a-Service (IaaS) clouds platforms. It
can for example set a default locale and hostname, generate SSH private host
keys, install SSH public keys for logging into a default account, set up
ephemeral mount points, and run user-provided scripts.
.
Various methods are supported for passing data to the instance at launch
time, including the standard interfaces of multiple platforms.
Homepage: https://launchpad.net/cloud-init
Package: libsmartcols1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 257
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Depends: libc6 (>= 2.17)
Description: smart column output alignment library
This smart column output alignment library is used by fdisk utilities.
Package: libcryptsetup4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 217
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cryptsetup
Version: 2:1.7.3-4
Depends: libc6 (>= 2.17), libdevmapper1.02.1 (>= 2:1.02.97), libgcrypt20 (>= 1.7.0), libuuid1 (>= 2.16), libgpg-error0 (>= 1.10-0.1)
Description: disk encryption support - shared library
Cryptsetup provides an interface for configuring encryption on block
devices (such as /home or swap partitions), using the Linux kernel
device mapper target dm-crypt. It features integrated Linux Unified Key
Setup (LUKS) support.
.
This package provides the libcryptsetup shared library.
Homepage: https://gitlab.com/cryptsetup/cryptsetup
Package: libwww-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 403
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.15-1
Depends: perl, ca-certificates, libencode-locale-perl, libfile-listing-perl, libhtml-parser-perl, libhtml-tagset-perl, libhtml-tree-perl, libhttp-cookies-perl, libhttp-date-perl, libhttp-message-perl, libhttp-negotiate-perl, liblwp-mediatypes-perl, liblwp-protocol-https-perl, libnet-http-perl (>= 6.07), liburi-perl, libwww-robotrules-perl, netbase
Recommends: libhtml-form-perl, libhtml-format-perl, libhttp-daemon-perl, libmailtools-perl
Suggests: libauthen-ntlm-perl
Breaks: fusioninventory-agent (<< 2.1.8-2), gsutil (<< 3.1-1), libfrontier-rpc-perl (<< 0.07b4-6), libhttp-daemon-ssl-perl (<< 1.04-3), libhttp-proxy-perl (<< 0.24-2), libhttp-request-ascgi-perl (<< 1.2-2), libhttp-request-params-perl (<< 1.01-6), libjson-rpc-perl (<< 0.96-3), libpoe-perl (<< 2:1.2990-2), librpc-xml-perl (<< 0.74-2), libsoap-lite-perl (<< 0.7.12-3), libwww-mechanize-formfiller-perl (<< 0.10-2), libwww-mechanize-perl (<< 1.66-2), satutils (<= 0.6), tidy-proxy (<< 0.97-4)
Description: simple and consistent interface to the world-wide web
libwww-perl (also known as LWP) is a collection of Perl modules that provide
a simple and consistent programming interface (API) to the World-Wide Web.
The main focus of the library is to provide classes and functions that allow
you to write WWW clients. It also contains general purpose modules, as well
as a simple HTTP/1.1-compatible server implementation.
Homepage: https://metacpan.org/release/libwww-perl
Package: libaprutil1-ldap
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 40
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.5.4-3
Depends: libaprutil1 (= 1.5.4-3), libc6 (>= 2.4), libldap-2.4-2 (>= 2.4.7)
Description: Apache Portable Runtime Utility Library - LDAP Driver
APR is Apache's Portable Runtime Library, designed to be a support library
that provides a predictable and consistent interface to underlying
platform-specific implementations.
.
APR Util is a utilities library implemented on top of apr, providing database
access, xml parsing, and other useful functionality.
.
This package contains the LDAP driver.
Homepage: http://apr.apache.org/
Package: libmime-tools-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 487
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 5.508-1
Depends: libconvert-binhex-perl, libmailtools-perl, perl
Description: Perl5 modules for MIME-compliant messages
This package provides the MIME-tools modules. MIME::Tools is a
collection of Perl5 MIME:: modules for parsing, decoding, and generating
single- or multipart (even nested multipart) MIME messages.
Homepage: https://metacpan.org/release/MIME-tools
Package: libpcap0.8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 326
Maintainer: Romain Francoise <rfrancoise@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpcap
Version: 1.8.1-3+deb9u1
Replaces: libpcap0.8-dev (<< 1.0.0-2)
Depends: libc6 (>= 2.14)
Description: system interface for user-level packet capture
libpcap (Packet CAPture) provides a portable framework for low-level
network monitoring. Applications include network statistics collection,
security monitoring, network debugging, etc.
.
Since almost every system vendor provides a different interface for
packet capture, and since there are several tools that require this
functionality, the libpcap authors created this system-independent API
to ease in porting and to alleviate the need for several
system-dependent packet capture modules in each application.
Homepage: http://www.tcpdump.org/
Package: php7.0-soap
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 335
Maintainer: Debian PHP Maintainers <pkg-php-maint@lists.alioth.debian.org>
Architecture: amd64
Source: php7.0
Version: 7.0.33-0+deb9u12
Provides: php-soap
Depends: php-common (>= 1:35), ucf, php7.0-common (= 7.0.33-0+deb9u12), libc6 (>= 2.14), libxml2 (>= 2.7.4)
Description: SOAP module for PHP
This package provides the SOAP module(s) for PHP.
.
PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
open source general-purpose scripting language that is especially suited
for web development and can be embedded into HTML.
Homepage: http://www.php.net/
Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 44
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Multi-Arch: foreign
Version: 5.4
Conffiles:
/etc/protocols bb9c019d6524e913fd72441d58b68216
/etc/rpc f0b6f6352bf886623adc04183120f83b
/etc/services 567c100888518c1163b3462993de7d47
Description: Basic TCP/IP networking system
This package provides the necessary infrastructure for basic TCP/IP based
networking.
Package: getmail4
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 637
Maintainer: Osamu Aoki <osamu@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 4.53.0-1+deb9u1
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~)
Conflicts: getmail
Description: mail retriever with support for POP3, IMAP4 and SDPS
getmail is intended as a simple replacement for fetchmail.
It retrieves mail (either all messages, or only unread messages)
from one or more POP3/IMAP4/SDPS servers for one or more email
accounts, and reliably delivers into a qmail-style Maildir, mbox
file or to a command (pipe delivery) like maildrop or procmail,
specified on a per-account basis. getmail also has support for
domain (multidrop) mailboxes.
.
Supported protocols:
POP3, POP3-over-SSL, IMAP4, IMAP4-over-SSL, and SDPS mail.
Homepage: http://pyropus.ca/software/getmail/
Package: discover
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 90
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: amd64
Version: 2.1.2-7.1+deb9u1
Depends: libc6 (>= 2.3), libdiscover2 (= 2.1.2-7.1+deb9u1), libexpat1 (>= 2.0.1), libusb-0.1-4 (>= 2:0.1.12), debconf (>= 0.5) | debconf-2.0
Suggests: lsb-base
Conflicts: discover1 (<< 2.0)
Conffiles:
/etc/discover-modprobe.conf 68df2d938e71f2723c42fce528070682
Description: hardware identification system
Discover is a hardware identification system based on the libdiscover2
library. Discover provides a flexible interface that programs can
use to report a wide range of information about the hardware that is
installed on a Linux system. In addition to reporting information,
Discover includes support for doing hardware detection at boot time.
Package: libwebp6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 462
Maintainer: Jeff Breidenbach <jab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 0.5.2-1+deb9u1
Depends: libc6 (>= 2.14)
Description: Lossy compression of digital photographic images.
Image Compression format, based on the VP8 codec.
WebP uses the modern VP8 compression format to deliver efficient
compression of images for the web. More than 30% extra gain over
optimized JPEG, for same quality, is not unusual.
Homepage: http://webp.googlecode.com
Package: php-symfony-process
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 146
Maintainer: Debian PHP PEAR Maintainers <pkg-php-pear@lists.alioth.debian.org>
Architecture: all
Source: symfony
Version: 2.8.7+dfsg-1.3+deb9u3
Depends: php-common
Description: execute commands in sub-processes
The Symfony Process Component helps with executing commands in
sub-processes by providing easy access to standard and error output
in real-time. It is especially handy for dealing with long running
sub-processes due to its feature to run them asynchronously, while
still providing access to their full and incremental output. It
additionally supports signals, provides the PID of a sub-process
and allows the definition of process timeouts.
.
Symfony is a PHP framework, a set of tools and a development methodology.
Homepage: https://symfony.com/doc/2.8/components/process.html
Package: libfile-stripnondeterminism-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 61
Maintainer: Reproducible builds folks <reproducible-builds@lists.alioth.debian.org>
Architecture: all
Source: strip-nondeterminism
Version: 0.034-1
Depends: libarchive-zip-perl, perl
Description: file non-deterministic information stripper — Perl module
StripNondeterminism is a library for stripping non-deterministic information
such as timestamps and filesystem ordering from various file and archive
formats.
.
This can be used as a post-processing step to improve the reproducibility of a
build product, when the build process itself cannot be made deterministic.
.
It is used as part of the Reproducible Builds project, although it should be
considered a temporary workaround which should not be needed in the long
term; upstream software should be reproducible even without using such a tool.
.
This package installs the Perl module ‘File::StripNondeterminism’.
Homepage: https://reproducible-builds.org/